lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Tie Rods
Connecting the Driver to the Vehicle
Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.
Designed for Strength, Durability, and Longevity
Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.
Product Reviews for moog-es3581 | Front Outer Tie Rod End | 2001-2005 Honda Civic | MOOG
- 5 Star (4)
-
-
- 80%
-
- 4 Star (1)
-
-
- 20%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-es3581
starstarstarstarstar_border" Review 2 Years Later "
Theyre holding up pretty good. However, my local mechanic says there is a slight play with them.\n
verified_user Verified Buyer - Thai-Quan Trinh - . MOOG moog-es3581 - 4 out of 5starstarstarstarstar" great upgrade "
I was going to go with OEM but after these you can really tell the difference in quality. These Moog parts just feel more durable and the boots feel tough.
verified_user Verified Buyer - eric gonzales - . MOOG moog-es3581 - 5 out of 5starstarstarstarstar" excellent "
Can't get better than Moog.
verified_user Verified Buyer - EDWARD POWELL - . MOOG moog-es3581 - 5 out of 5starstarstarstarstar" Awesome "
Works as it was suppose to, was easy to install. Very Satisfied with results.
verified_user Verified Buyer - Joseph Wathen - . MOOG moog-es3581 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Hello I just bought moog-es3581 | Front Outer Tie Rod End | 2001-2005 Honda Civic but I have a question, do I need to fill oil after install this part or it came with oil inside?
- Answer:
- moog-es3581 is greaseable. After the tie rod is assembled grease will be injected into it. This is to preserve the part while it sits on the shelf. It must be greased after it is installed and every oil change.
- Question:
- Can I get part number es3581 with extended threads?
- Answer:
- No, we only offer part number es3581 with the stock specs.
- Question:
- Does the tie rod end es3581 comes pre-grease or do I have to add grease to it?
- Answer:
- Yes, the tie rod moog-es3581 does come with some grease in it but you will need to grease it fully after installation and every oil change/
- Question:
- Is this a single tie rod end or is it a pair of two tie rods?
- Answer:
- All Moog tie rods are sold individually. If your replacing the left and right outer tie rod you would need to purchase 2.