moog-es3624 | Front Inner Tie Rod End | 07-16 Jeep Wrangler | MOOG

  • moog-es3624 360image 1
  • moog-es3624 Inner Tie Rod End - Passenger Side At Pitman Arm - 1st Design
  • moog-es3624 Inner Tie Rod End - Passenger Side At Pitman Arm - 1st Design
  • moog-es3624 Inner Tie Rod End - Passenger Side At Pitman Arm - 1st Design
  • moog-es3624 Inner Tie Rod End - Passenger Side At Pitman Arm - 1st Design
  • moog-es3624 360image large 1

Inner Tie Rod End - Passenger Side At Pitman Arm - 1st Design

Manufacturer: MOOG
Part Number: moog-es3624
Price: $38.00

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentInner Tie Rod End - Passenger Side At Pitman Arm - 1st Design moog-es3624 fits these vehicles:
Details

moog-es3624 | Front Inner Tie Rod End | 07-16 Jeep Wrangler | MOOG

At Pitman Arm
Uses a steering linkage with a tapered hole in the drag link for steering damper mounting.

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

MOOG moog-es3624

Product Reviews for moog-es3624 | Front Inner Tie Rod End | 07-16 Jeep Wrangler | MOOG

5 Star (19)
95%
4 Star (0)
0%
3 Star (1)
5%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-es3624

5 out of 5 based on 20 user reviews. Write a Review

M
verified_user

starstarstarstarstar" Great product "

Easy install, well constructed, and it is greasable.

verified_user Verified Buyer - - . MOOG moog-es3624 - 5 out of 5
R
verified_user

starstarstarstarstar" Very good service "

I fitted my MOOG ball joint without any hassles, and Im so pleased I can grease it and keep it going for many years above an beyond the life of the OEM part.\nService was as quick as can be expected from a US supplier to Australia, will purchase again from these guys.

verified_user Verified Buyer - - . MOOG moog-es3624 - 5 out of 5
R
verified_user

starstarstarstarstar" Very good service "

I fitted my MOOG ball joint without any hassles, and Im so pleased I can grease it and keep it going for many years above an beyond the life of the OEM part.\nService was as quick as can be expected from a US supplier to Australia, will purchase again from these guys.

verified_user Verified Buyer - - . MOOG moog-es3624 - 5 out of 5
D
verified_user

starstarstarstarstar" serious parts "

MOOG is perfect

verified_user Verified Buyer - - . MOOG moog-es3624 - 5 out of 5

Fitment for moog-es3624
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
DodgeRam 15002008-2006Inner4WD Quantity 1
DodgeRam 25002008-2003Inner4WD Quantity 1
DodgeRam 35002008-2003Inner Quantity 1
JeepWrangler2017-2007Inner Quantity 1
JeepWrangler JK2018Inner Quantity 1

question_answer Customer Questions and Answers


Question:
Will this part ES3624 fit above Jeep?
Answer:
Moog does not make steering linkage for a RH drive Jeeps.

Question:
What size Zerk fitting goes on a Moog ES3624 Tie Rod end?
Answer:
Most of Moog's grease zerks are 1/4x28 self tapping threads.

Question:
I just installed an ES3624 at the pittman arm. Do I need to grease it w/ the zerk fitting prior to use or has it been greased at the factory?
Answer:
moog-es3624 does have grease in it to preserve the part while it sets on the shelf. It must be greased after it is installed and every oil change.

Question:
Will the moog-es3624 | Front Inner Tie Rod End | 07-16 Jeep Wrangler thread into the stock driver side tie rod end coming off of the steering box?
Answer:
Yes Moog tie rods will replace the OEM tie rods with no issues.

Question:
What is the large taper of the ES3624?
Answer:
ES3624 specifications: Stud Center to End: 6.540 Rod Thread: 1.0 -18R Rod Type: Male Stud Diameter top: 0.652 Stud Thread: M14-1.5 End 1 Thread Diameter: 1.000 End 1 Thread Direction: Clockwise End 1 Threads per Inch: 18

Question:
Do you offer the jam nut for part number es3624?
Answer:
No, unfortunately we do not offer the jam nut for part number es3624.

Question:
What are the thread specs on es3624?
Answer:
The thread specs on part number moog-es3624 are 1.0-18R.

Question:
Is part number es3624 the tie rod at the pitman arm for the 2012 jeep wrangler JK?
Answer:
Yes, part number es3624 is the tie rod at the pitman arm for the 2012 jeep wrangler JK.

Question:
What is the length?
Answer:
The length on part number moog-es3624 is 6.54 from stud center to end.

Question:
Will part number es3624 work for the right hand drive?
Answer:
No, part number es3624 is for left hand drive.

Question:
Is this tie rod end grease able or not?
Answer:
Moog-es3624 tie rod is greaseable and includes a grease zerk.