lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Limited to ONE replacement during guarantee period
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
| Grade | Premium |
|---|
question_answer Customer Questions and Answers
- Question:
- When installing these, does it effect the ball joints and give a stiff ride? Or does it allow to lift without messing up the ball joint angles.
- Answer:
- moog-k100011 will not effect the ride of the Tahoe. This is capable of lifting 3 inches above OEM ride height. It will not effect the ball joint angle enough to cause damage to the ball joint.
- Question:
- Do the torsion bar key come as a set with both keys or just one?
- Answer:
- Kit number moog-k100011 will come with both Torsion Bar keys, one for each side of your bar.
- Question:
- Does Moog-K100011 come with the two bolts shown in the product image?
- Answer:
- Part number Moog-K100011 will only come with the smaller bolts, Moog had done a redesign and this part no longer comes with the two sets of bolts.
- Question:
- How much of adjustment does part number k100011 allow?
- Answer:
- Part number k100011 allows adjustment range from 1/2 to 1 1/2 inches.
- Question:
- Does part number k100011 level out my truck?
- Answer:
- Part number k100011 can be used to level your truck. Torsion bar keys allow you to torque the torsion bar in the front of your vehicle, to raise or lower the truck about an inch to two inches.
- Question:
- Is part number k100011 supposed to restore the vehicle back to OE ride height of lift it?
- Answer:
- Part number k100011 allows adjustment range from 1/2 to 1-1/2 inch to get back to OE ride height.
- Question:
- Is the part k100011 for factory ride height or a leveling ride on a 01 tahoe?
- Answer:
- Part number k100011 is fitted for factory ride height.