Front Torsion Bar Key | Chevrolet Suburban 25 2000-2010

  • moog-k100012 Front Torsion Bar Key

Front Torsion Bar Key

Manufacturer: MOOG
Part Number: moog-k100012
Price: $522.84

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Limited to ONE replacement during guarantee period

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Torsion Bar Key moog-k100012 fits these vehicles:
Details

Front Torsion Bar Key | Chevrolet Suburban 25 2000-2010

Adjustable -1/2 to 1-1/2 Degrees Only Fits 8 Stud Hub

Specific Fitment Distinctions:

  • Position: Front.
  • Notes: Adjustable -1/2 to 1-1/2 Degrees; with 8 Stud Hub.
Fitment for moog-k100012

All Vehicles: Adjustable -1/2 to 1-1/2 Degrees; with 8 Stud Hub.

YearsMakeModelPositionDrive Wheel
2005 - 2006ChevroletAvalanche 1500Front
2002 - 2006ChevroletAvalanche 2500Front
2007ChevroletSilverado 1500 HD ClassicFront
2001 - 2003, 2005 - 2006ChevroletSilverado 1500 HDFront
2007ChevroletSilverado 2500 HD ClassicFront
2001 - 2010ChevroletSilverado 2500 HDFront
1999 - 2000ChevroletSilverado 2500Front4WD
2001 - 2004ChevroletSilverado 2500Front
2007ChevroletSilverado 3500 ClassicFront
2007 - 2010ChevroletSilverado 3500 HDFront
2001 - 2006ChevroletSilverado 3500Front
2000 - 2010ChevroletSuburban 2500Front
2007GMCSierra 1500 HD ClassicFront
2001 - 2003, 2005 - 2006GMCSierra 1500 HDFront
2007GMCSierra 2500 HD ClassicFront
2001 - 2010GMCSierra 2500 HDFront
1999 - 2004GMCSierra 2500Front
2007GMCSierra 3500 ClassicFront
2007 - 2010GMCSierra 3500 HDFront
2001 - 2006GMCSierra 3500Front
2000 - 2010GMCYukon XL 2500Front
2003 - 2009HummerH2Front
GradePremium
OEM part numbers MOOG K100012 replaces

MOOG K100012 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
General MotorsXL325328CA

It also replaces these original equipment service part numbers.

Service brandService part number replaced
ACDelco45K31002

question_answer Customer Questions and Answers


Question:
Is it possible to just buy the adjustment bolts for K100012?
Answer:
No, we do not sell just the bolts from part number moog-k100012.

Question:
What are the symptoms of the parts listed above when they go bad k-100012 there part of torsion that runs length wise on truck
Answer:
One is where the bolt that contacts the toe. This depends on how many times the tide height was adjusted. The other point is where the torsion bar goes through. The bar fits in the toe and it has pressure on it caused by the twisting of the bar.

Question:
Is part number k100012 leveling keys or are they OEM specs?
Answer:
Part number k100012 are OEM specs.