lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Alignment Parts
Caster or Camber issues? Moog has got you covered with their line of alignment parts. Moog's engineers have designed this part to give you adjustability and flexibility with the alignment angles in your suspension. Whether caster, camber, or both, Moog's alignment parts will set your suspension up better than when you first drove the vehicle off the lot.
question_answer Customer Questions and Answers
- Question:
- Does this come as a set so I can do both rear tires? Or do I need to purchase two?
- Answer:
- These are sold individually, so you will need two for your application.
- Question:
- Does your kit contain bolt for both sides or do I need to purchase 2kits?
- Answer:
- You would have to purchase 2 moog-k100383 to do the left and right sides.
- Question:
- I will be lowering my 2015 Explorer Soon, and want to know if the moog-k100383 will help keep my tires in the correct alignment.
- Answer:
- Moog parts are made as an OE stock replacement. We wont be able to guarantee a Moog part to fit on a lowered or lifted vehicle. What matters most is how much adjustment you will need. The moog-k100383 will provide a plus or minus 3/4 degree of camber r. Which could help keep your rear end aligned, but again it would depend on how out of alignment you vehicle is after you have lowered it. ...see more