lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
shuffle Cross References 1keyboard_arrow_down
Moog Control Arm Bushings
Controlling Comfort and Steering
If your vehicle is suffering from early tire wear, handling issues, or loud noises under the chassis, you could be dealing with worn OE control arm bushings. Designed to attach the steering knuckle and wheel assembly to the vehicle, your control arms are a crucial part of your steering system. The bushings themselves absorb impacts from the road, smoothing and quieting your ride.
Long-Term Performance and Long-Term Coverage
Moog crafts each of their bushings to either meet or exceed OE specifications. While the OE bushings might sag or rot away, Moog's control arm bushings are there for the long haul. Moog backs this up by covering all of their control arm bushings with a lifetime warranty handled in-house here at DST.
question_answer Customer Questions and Answers
- Moog K200773 - Control arm bushing: 2005 Toyota Tacoma, 4.0L, DBL Cab, 4x4 Sport, 6 lug - You have two front lower control arm bushings listed for my vehicle; k200774 and k200773 and no dimensions of these products are listed so i know which one i need. How can I tell which ones are needed without the product technical specifics?
- The main differences between these two bushings will come down to what sub-model Tacoma you have. The Moog-K200773, is for the Base and Pre-Runner models Tacomas, while the Moog-k200774 is for the X-Runner model Tacomas. I have the specs for both par rts as well, The Moog-K200773 has an OD of 1.93, and ID of .62 and a length of 2.83. The Moog-K200774 has an OD of 2.04 and ID of .69 and a length of 3.19. ...see more
- What is this part made of?
- Part number moog-k200774 is made of rubber.