Rear Upper Control Arm Bushing | Pontiac Aztec | MOOG

  • moog-k200840 360image 1
  • moog-k200840 Rear Upper Knuckle Bushing
  • moog-k200840 Rear Upper Knuckle Bushing
  • moog-k200840 Rear Upper Knuckle Bushing
  • moog-k200840 Rear Upper Knuckle Bushing
  • moog-k200840 Rear Upper Knuckle Bushing
  • moog-k200840 360image large 1

Rear Upper Knuckle Bushing

Manufacturer: MOOG
Part Number: moog-k200840
Price: $33.36

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Limited to ONE replacement during guarantee period

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentRear Upper Knuckle Bushing moog-k200840 fits these vehicles:
Details

Rear Upper Control Arm Bushing | Pontiac Aztec | MOOG

Specific Fitment Distinctions:

  • Position: Rear At Knuckle (Upper).
  • Notes: Corrects Looseness and Restores Alignment.
2005-2006 Chevrolet Uplander
2005-2006 Saturn Relay
  • (AWD)
2005 Pontiac Montana
  • (AWD, SV6)

Moog Control Arm Bushings

Controlling Comfort and Steering

If your vehicle is suffering from early tire wear, handling issues, or loud noises under the chassis, you could be dealing with worn OE control arm bushings. Designed to attach the steering knuckle and wheel assembly to the vehicle, your control arms are a crucial part of your steering system. The bushings themselves absorb impacts from the road, smoothing and quieting your ride.

Moog Control Arm Bushing
Worn Rubber Bushing

Long-Term Performance and Long-Term Coverage

Moog crafts each of their bushings to either meet or exceed OE specifications. While the OE bushings might sag or rot away, Moog's control arm bushings are there for the long haul. Moog backs this up by covering all of their control arm bushings with a lifetime warranty handled in-house here at DST.

MOOG moog-k200840

Product Reviews for Rear Upper Control Arm Bushing | Pontiac Aztec | MOOG

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k200840

5 out of 5 based on 2 user reviews. Write a Review

D
verified_user

starstarstarstarstar" Good "

Worked well no problems.

verified_user Verified Buyer - Dennis Murphy - . MOOG moog-k200840 - 5 out of 5
P
verified_user

starstarstarstarstar" very pleased "

Had the bushings installed by the local Chevrolet service shop on July 23, 2014 and the clunking noise in the rear of the vehicle is gone.\n\nThank you

verified_user Verified Buyer - Paul Eldridge - . MOOG moog-k200840 - 5 out of 5
Fitment for moog-k200840

All Vehicles: Corrects Looseness and Restores Alignment.

YearsMakeModelSubModelPositionDrive Wheel
2002 - 2007BuickRendezvousRear At Knuckle (Upper)
2005 - 2006BuickTerrazaRear At Knuckle (Upper)AWD
2005 - 2006ChevroletUplanderRear At Knuckle (Upper)AWD
2002 - 2004ChevroletVentureRear At Knuckle (Upper)AWD
2002 - 2004OldsmobileSilhouetteRear At Knuckle (Upper)AWD
2001 - 2005PontiacAztekRear At Knuckle (Upper)AWD
2002 - 2004, 2006PontiacMontanaRear At Knuckle (Upper)AWD
2005PontiacMontanaSV6Rear At Knuckle (Upper)AWD
2005 - 2006SaturnRelayRear At Knuckle (Upper)AWD
Overview
GradePremium
Dimensions
Length59.9mm (2.36 in)
Outside Diameter46mm (1.81 in)
Inside Diameter14.5mm (0.57 in)
Materials, color & finish
MaterialSteel Clad Rubber
OEM part numbers MOOG K200840 replaces

MOOG K200840 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
General Motors18026757
General Motors18026758
General Motors18026759
General Motors18026760

question_answer Customer Questions and Answers


Question:
What is the difference between the MOOG-K200840 and the MOOG-K200175?
Answer:
The main difference between these two kits is that K200840 contains an installation tool, K200175 does not.

Question:
Does this part have to be pressed in?
Answer:
The old bushing would have to be pressed out and the new moog-k200840 bushing would have to be pressed in.