add_shopping_cart Suggested Parts 1keyboard_arrow_down
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
moog-k201618 | 29.97mm Front Sway Bar Bushings | 2008-2015 Challenger
29.97mm Front Sway Bar Bushings with Synthetic Fabric Lining 05-09 Chrysler 300 | 08-15 Dodge Challenger | 06-15 Charger | 05-08 Magnum
Moog's 29.97mm (1.18in) Front Sway Bar Bushings fit the Chrysler 300, Dodge Challenger, Charger, and Magnum and provide greater durability and eliminate squeaking by using a synthetic fabric lining on the inside diameter of the bushings. These front sway bar bushings will last longer than the original equipment (OE) sway bar bushings, provide a stable grip on your sway bar, and improve handling in a turn.
Improve Your Sway Bar Bushings
The OE front sway bar bushings on your Dodge are made of rubber which is the standard bushing material since it absorbs the bumps and jolts of driving and it's cheap. That rubber will begin to wear down over time, especially if you enjoy taking the occasional sharp turn on one of Hood County's backroads at speed. The friction of that metal sway bar against the soft rubber bushings will also cause the bushings to squeak as they age and the gap between the bar and the bushings get bigger. Since the front sway bar bushings are part of the system that keeps your front tires in solid contact with the ground during a turn it's important that they are in good condition.
PTFE Lined Toughness
When the front sway bar bushings wear down, and your sway bar moves around in the gaping that is left by the hollowed out bushings, you can experience increased body roll, squeaking, and loss of traction during a quick turn. The solution is to replace those front sway bar bushings, but if you use OE replacements then they will probably need to be replaced after the same amount of time as your originals.
If you're already hearing some squeaking, experiencing that body roll, or you want to preemptively install a longer lasting front sway bar bushing, then Moog has a great alternative to OE with their 29.97mm front sway bar bushings with PTFE Synthetic Fabric Lining.
Easy, Longer Lasting, Replacement
The new PTFE synthetic fabric lining creates a tough barrier between the sway bar and the sway bar bushings, reducing the wear that the friction of turning causes. This allows these front sway bar bushings to last 3 times longer than the OE bushings, increasing the time between necessary replacements. More durability means these bushings hold the sway bar securely, giving you better-turning performance and less body roll. The lining also eliminates the annoying squeaking that can develop as OE bushings age.
Moog's Problem Solver sway bar bushings are split along the side for an easy install that can be completed in your own garage or driveway with a simple socket set. Merely remove the bracket and OE bushing, slip the new sway bar bushing over the bar, and bolt the bracket back down. If you do happen to have any issues with these bushings Suspension.com will handle the warranty for you in-house to save you any hassle.