moog-k201620 | 22mm Front Sway Bar Bushings | 01-17 MDX | 03-15 Pilot

  • moog-k201620 360image 1
  • moog-k201620 Front Sway Bar Bushings - 22 mm (0.86 inch)
  • moog-k201620 Front Sway Bar Bushings - 22 mm (0.86 inch)
  • moog-k201620 Front Sway Bar Bushings - 22 mm (0.86 inch)
  • moog-k201620 Front Sway Bar Bushings - 22 mm (0.86 inch)
  • moog-k201620 Front Sway Bar Bushings - 22 mm (0.86 inch)
  • moog-k201620 360image large 1

Front Sway Bar Bushings - 22 mm (0.86 inch)

Manufacturer: MOOG
Part Number: moog-k201620
Price: $9.96

check_box In Stock check_box Ships Immediately

Suggested part for moog-k201620: dll122
dll122 Front Sway Bar Lateral Locks - 21-22mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Sway Bar Bushings - 22 mm (0.86 inch) moog-k201620 fits these vehicles:

moog-k201620 | 22mm Front Sway Bar Bushings | 01-17 MDX | 03-15 Pilot

22mm Front Sway Bar Bushings with Synthetic Fabric Lining 2001-2017 Acura MDX | 2003-2015 Honda Pilot

These 22mm (0.87in) Front Sway Bar Bushings fit the 01-17 Acura MDX and 10-13 ZDX and the 05-13 Honda Odyssey, 03-15 Pilot, and 06-14 Ridgeline. The synthetic fabric lined inner diameter of these front sway bar bushings will last longer than the original equipment (OE) sway bar bushings and eliminate the squeaking that comes with age and wear. These durable bushings will continue to provide a stable grip on your sway bar long after OE bushings would have worn down, meaning better handling in a turn that lasts longer.

22mm front sway bar bushings 01-17 acura mdx
worn inner diameter of a sway bar bushing

Worn Sway Bar Bushings

The front sway bar connects the driver and passenger sides of your Honda or Acura and keeps the wheels well connected to the pavement during a quick turn. When the OE bushings wear down the sway bar isn't held securely and your inside wheel can lose some contact, and traction while turning. If you routinely carry a lot of passengers or cargo then your OE bushings will have a short lifespan compared to the rest of your vehicle.

In north central Texas even a Honda Odyssey won't always be driving on nice flat roads. The bumps and jolts of driving on rougher roads can cut into the lifespan of your OE rubber sway bar bushings, wearing them down and increasing body roll.

PTFE Lined Protection

When the front sway bar bushings wear down, your sway bar can move around in the excess space of the hollowed out bushings. This will increase body roll and could cost you traction during a sharp, quick turn since the sway bar will mash the worn bushings or allow the bar to move laterally. A worn sway bar bushing can also produce an annoying squeaking any time you hit a little bump in the road. If you're already experiencing some noise or traction loss in a turn then Moog has a great solution with their 26.92mm front sway bar bushings with PTFE synthetic fabric lining.

synthetic fabric lined sway bar bushings honda and acura
22mm front sway bar bushings 03-15 honda pilot

3X The Distance

The new synthetic fabric lining creates a tough barrier of PTFE between the sway bar and the rubber of the sway bar bushings, reducing the wear that the metal bar has on soft rubber. Because of this these front sway bar bushings can last 3 times longer than the OE bushings, meaning this might be the last replacement you'll ever have to buy. More durability means these bushings hold the sway bar in place longer, giving you better-turning performance and less body roll. The lining also eliminates the annoying squeaking that can develop as OE bushings age.

Moog's Problem Solver sway bar bushings are split along the side for an easy install that can be completed in your own garage or driveway with a simple socket set. Merely remove the bracket and OE bushing, slip the new sway bar bushing over the bar, and bolt the bracket back down. If you do happen to have any issues with these bushings will handle the warranty for you in-house to save you any hassle.

question_answer Customer Questions and Answers

Moog-K201620 - Sway Bar Bushings- 2004 Honda Pilot ex - does these bushing come as a set?
Yes, part number Moog-K201620 will come as a pair, or with two sway bar bushings.

Moog-K201620 - Sway bar bushings- 2004 Honda Pilot - What are the differences between the front and rear sway bar bushings, reason I ask is because I ordered the front replacement but received two sets because it was not noted they came in a set of 2. So I am wondering if the front can be used on the rear? thanks in advance!
Part number Moog-K201620 is not fitted for the rear sway bar of a 04 Honda Pilot.