lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
34mm Front Sway Bar Bushings with Synthetic Fabric Lining 03-08 Dodge Ram 1500 | 07-10 Dodge Ram 3500 | 13-14 Ram 2500
These 34mm (1.34in) Front Sway Bar Bushings also fit the 07-10 Dodge Dakota, 07-09 Chrysler Aspen, and 04-09 Dodge Durango. The synthetic lined inner diameter of these front sway bar bushings will last longer than the original equipment (OE) bushings, meaning your sway bar will be held more securely for a longer amount of time. The lining also eliminates the squeaking that OE bushings can produce with age and wear, keeping your ride quiet.
When OE Wears Down
The front sway bar connects the driver and passenger sides of your Dodge and keeps the wheels connected to the pavement during a quick turn. The friction that a turn generates between the metal sway bar and the rubber sway bar bushings. This wear takes a high toll on the integrity of the bushings, so the rubber that makes up most OE bushings has a short lifespan compared to the rest of your Dodge, especially if you occasionally herd cattle from the comfort of your truck like some north central Texas ranchers like to do.
A Problem Solver Solution
When the OE sway bar bushings wear down, a gap can form between the bushings and the sway bar, allowing your sway bar to shift making it less effective at reducing body roll. Increased body roll means that when you take a turn the inside tire will pull away from the driving surface which could affect your traction during a turn. Worn OE bushings also tend to squeak when your truck goes over bumps or you turn, and that might be embarrassing when you're pulling into the parking lot of Hard 8 BBQ in Stephenville, TX.
Moog has developed a more durable front sway bar bushing with a synthetic fabric lining to solve these problems.
3X the Lifespan of OE
The new synthetic fabric lining creates a tough barrier between the sway bar and the sway bar bushings, reducing the wear that the friction of turning causes. The lining allows these front sway bar bushings to last 3 times longer than the OE bushings, increasing the time between necessary replacements. More durability means these bushings hold the sway bar securely, giving you better-turning performance and less body roll. The lining also eliminates the annoying squeaking that can develop as OE bushings age.
Moog's Problem Solver sway bar bushings are split along the side for an easy install that can be completed in your own garage or driveway with a simple socket set. Simply remove the bracket and OE bushing, slip the new sway bar bushing over the bar, and bolt the bracket back down. If you do happen to have any issues with these bushings, Suspension.com will handle the warranty for you in-house.
question_answer Customer Questions and Answers
- Question:
- Just like to know which way does the split in the sway bar bushing suppose to go towards front or rear?
- Answer:
- I have installed them towards the rear of the vehicle. Less likely for water and dirt to work its way into the bushing.
- Question:
- Is it 1 bushing in the box or 2?
- Answer:
- There are 2 bushings per box.
- Question:
- Will the k201623 sway bar bushings fit a 33mm sway bar?
- Answer:
- No moog-k201623 will fit a 34mm sway bar. It will be large to fit a 33mm bar.
- Question:
- Will these sway bar bushings k201623 fit my 2006 Dodge Ram 1500 Mega Cab?
- Answer:
- For sway bar bushings, You will need to know the exact size of your front and rear sway bar since even if OEM stock all come in different sizes. Since they differ in size and manufacturers did not make the same sway bar on any of their vehicles. I do o apologize for this inconvenience. Check out our blog of six different ways to measure https://www.suspension.com/blog/how-to-measure-a-sway-bar-6-different-ways/ Here is what we have fitted https://www.moog-suspension-parts.com/products/dodge_ram_1500_2wd_2006?scri=35&filter If you cannot find what you need. You can try our universals main site https://www.suspension.com/universal-sway-bar-bushings.asp Just so you know, If you do not know your sway bar size DST cannot guarantee fitment. ...see more