lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Limited to ONE replacement during guarantee period
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
| Grade | Premium |
|---|
question_answer Customer Questions and Answers
- Question:
- Do these need to be pressed in with hydraulic press?
- Answer:
- You could use a hydraulic press or a ball joint press.
- Question:
- Is it polyurethane or rubber?
- Answer:
- Moog does not make track bar and control arm bushing in polyurethane.
- Question:
- What are the dimensions of Moog Track Bar Bushing Part Number k201686?
- Answer:
- The dimensions of Moog Track Bar Bushing Part Number Kk201686 are for the bushing 1.27inx1.55inx1.8in and for the metal sleeve 1.27inx.67inx1.0in.
- Question:
- What is the outside diameter of k201686?
- Answer:
- The outer diameter of part number moog-k201686 is 45.1mm.
