add_shopping_cart Suggested Parts 2keyboard_arrow_down
While MOOG greaseable parts come greased from the factory, they should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.
Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.
Product Reviews for moog-k3134t | Front Upper Ball Joint | Dodge Trucks and Jeeps | Moog
- 5 Star (4)
-
-
- 67%
-
- 4 Star (2)
-
-
- 33%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k3134t
starstarstarstarstar_border" Great quality, improved ride. "
The nut on the lower ball joint is a self locking nut and I needed an impact to get it tightened, despite that the install was easy for my first ball joint replacement.
verified_user Verified Buyer - Roman Fiorio - . MOOG moog-k3134t - 4 out of 5starstarstarstarstar" good "
Work well.
verified_user Verified Buyer - Robert OConnor - . MOOG moog-k3134t - 5 out of 5starstarstarstarstar" Review 1 Year Later "
Installed easily and have performed flawlessly.
verified_user Verified Buyer - Richard G Hughart Jr - . MOOG moog-k3134t - 5 out of 5starstarstarstarstar" Review 1 Year Later "
Installed easily and have performed flawlessly.
verified_user Verified Buyer - Richard G Hughart Jr - . MOOG moog-k3134t - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Moog-K3134t - Front upper ball joint - Jeep Wrangler Sport JK 2011 - I purchased both upper ball joints and the shafts on both slide in and out . Lower joints are solid in place. is this normal and why?
- Answer:
- Moog-K3134t - Front upper ball joint - The stud on this ball joint is engineered to slide in and out of the housing. This DOES NOT indicate excessive play or any other issue with the part. This feature is necessary for correct part installation and d function. ...see more
- Question:
- For part number K3134T Why was this ball joint changed? 3/4 of inch space between dust cap and steering knuckle exposing stud after install this cant be right or is it?
- Answer:
- Moog-K3134t - Upper Ball Joint - Is a telescoping upper ball joint. The stud telescopes a small amount to compensate for manufacturing variances in the tolerance of the axle and knuckle ears. The stud is engineered to slide in and out of the housing. . It does not indicate excessive play or any other issue with the part. This feature is necessary for the correct part installation and function. When this ball joint is installed and torqued to proper specs, it will automatically adjust to the required extended length ...see more
- Question:
- Is it normal that ball joint K3134t stud is moving up and down?
- Answer:
- Moog-K3134t - Front Upper Ball Joint - Has a telescoping effect which may result in the stud appearing: As if it is too long or too short, or as if it has excessive play, The stud is engineered to slide in and out of the housing. This DOES NOT T indicate excessive play or any other issue with the part. This feature is necessary for correct part installation and function. ...see more
- Question:
- Is this a single ball joint or pair?
- Answer:
- All Moog ball joints are sold individually. Not in pairs.
- Question:
- What is the diameter of the surface that will be pressed into the axle housing?
- Answer:
- The OD of the base of the ball joint that presses in is 2.140 inches.
- Question:
- Is part number k3134t the direct oem replacement for my 2015 Wrangler JK Rubicon?
- Answer:
- Yes, part number k3134t is the direct oem replacement for the 2015 Wrangler JK Rubicon.
- Question:
- Will part number k3134t be the stock replacement ball joint for my 2015 jk wrangler?
- Answer:
- Yes, part number k3134t will be the stock replacement for the 2015 jk wrangler.
- Question:
- What are the specifications of the moog-k3134t ball joint?
- Answer:
- Here are the specs for moog-k3134t ball joint that are shown in the Moog e-catalog: Maximum Outside Diameter (IN) 2.140
- Question:
- Is part number K3134T a press-in type ball joint?
- Answer:
- Yes, part number K3134T is press-in.
- Question:
- What is the outer diameter of part number K3134T?
- Answer:
- Part number K3134T has an outer diameter of 2.140 inches.
- Question:
- I ordered part number k3134t in 2010 and it now needs to be replaced. Can I still have it warrantied?
- Answer:
- Yes, part number k3134t has a lifetime warranty.
- Question:
- Moog-K3134t - Front Upper Ball Joint - 2003 Honda Accord - I just purchased two Moog ball joints from amazon.com. how does the warranty work if they should fail?
- Answer:
- Moog warranties will vary from dealer to dealer, since you purchased your parts from Amazon you will need to get back to Amazon for any warranty. If the parts were purchased through our website the Moog problem solver ball joints will have a limited life time warranty that we handle in house. ...see more
- Question:
- Moog-K3134t - Front Upper Ball Joint - 1996 Jeep Cherokee Sport - I just purchased Moog ball joint k3134t. The stud moves up and down approx 1/3 inch in the housing. Is the ball joint bad or is this movement allowable for the upper ball joint?
- Answer:
- For part number Moog-K3134t The stud telescopes a small amount to compensate for manufacturing variances in the tolerance of the axle and knuckle ears. The stud is engineered to slide in and out of the housing. This DOES NOT indicate excessive play or any other issue with the part. This feature is necessary for correct part installation and function. ...see more
- Question:
- Moog-K3134t - Upper Ball Joint - 2007 Jeep Wrangler JK - What are the specs for the amount of movement in the upper ball joint that would be a pass or fail.
- Answer:
- Moog-K3134t - Upper Ball Joint - Is a telescoping upper ball joint. The stud telescopes a small amount to compensate for manufacturing variances in the tolerance of the axle and knuckle ears. If you want to know if it failed you would need to also lo ook at the lower ball joint as well. If the lower ball joint has play then it could be just the lower ball joint that has failed and not the upper one. ...see more
- Question:
- For part number K3134T It looks like the upper ball joint presses in the opposite direction of the original. Is this correct?
- Answer:
- MOOG-K3134T - Front Upper Ball Joint - The ball joint will install the same way the OEM ball joint. When installing the ball joint you want to install with the grease relief positioned inward away from the wheel. It may say