lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.


Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

Product Reviews for Front Lower Ball Joint | Jeep Wrangler | MOOG-K3161T
- 5 Star (4)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k3161t
starstarstarstarstar" Review 1 Year Later "
Installed easily and have performed flawlessly.
verified_user Verified Buyer - Richard G Hughart Jr - . MOOG moog-k3161t - 5 out of 5starstarstarstarstar" Review 1 Year Later "
Installed easily and have performed flawlessly.
verified_user Verified Buyer - Richard G Hughart Jr - . MOOG moog-k3161t - 5 out of 5starstarstarstarstar" Review 1 Year Later "
Installed easily and have performed flawlessly.
verified_user Verified Buyer - Richard G Hughart Jr - . MOOG moog-k3161t - 5 out of 5starstarstarstarstar
Met expectation, better than the OEM part I replaced.
verified_user Verified Buyer - John Vegas - . MOOG moog-k3161t - 5 out of 5question_answer Customer Questions and Answers
- Question:
- What is the thread specs on the zerk fitting?
- Answer:
- On part number moog-k3161t the thread on the zerk fitting is 10x32 metric.
- Question:
- Moog-k3161t - Front Lower Ball Joint - I have a k3161t for a 1999 Jeep Cherokee, with the grease fitting in place the axle will not turn as the u-joint hits the grease fitting. What should I do?
- Answer:
- Moog-k3161t - Front Lower Ball Joint There is not enough clearance for the axle universal joint to rotate when the lower ball joint grease fitting is in place. The lower ball joint grease fitting is to be installed for lubrication only. After lub bricating the grease fitting must be removed and grease plug installed. ...see more
- Question:
- I have one k3161t with the new integral dust boot and one with the old style dust boot. Can I still purchase the ball joint with the old style dust boot or are they all going to be the integral dust boot style now?
- Answer:
- Moog only makes the k3161t with the integral dust boot now, so it will start to be hard to find the ball joint with the old style dust boot.
- Question:
- MOOG-K3161T - I would like to just purchase the front lower ball joint boot for a 2005 jeep wrangler 6.0 l but all i see is the whole ball joint assembly in the parts for my vehicle. please help and let me know what part number the ball joint boot is.
- Answer:
- Moog unfortunately does not sell their dust boots alone. We ,being an authorized dealer of Moog as well as many other manufactures, do offer universal boots that are found by measurements that you will need to provide to us. http://www.suspension.co om/universal-dust-boots.asp ...see more
- Question:
- The previous owner put an oversized lower ball joint in. I was told you had oversized ball joints for the 92 Cherokee the MOOG-K3161T is a hair too small you can push it in with your hand. Can you suggest something that you think might work?
- Answer:
- Moog does not make and oversize lower ball joint for your Cherokee. Either the front axle will have to replaced or repaired.
- Question:
- I need an oversized lower ball joint someone previously pressed an oversized lower in it. What is the part number for Moog that I need?
- Answer:
- Mogo does not make an oversize lower ball joint. If the k3161t is too small the front axle will have to be replaced or repaired.
- Question:
- Is the boot on the K3161T ball joint replaceable?
- Answer:
- No. Moog-k3161t ball joint has the new design integral dust boot. It is not an external dust boot.
- Question:
- Do your ball joints have any plastic bearing surfaces?
- Answer:
- No. Moog uses a gusher bearing. Put the link in a Google or Yahoo search: https://www.suspension.com/blog/moog-gusher-bearing-technology/. It will explain the gusher bearing technology.
- Question:
- Is this ball joint k3161t an oversized balljoint?
- Answer:
- moog-k3161t is not an oversize ball joint.
- Question:
- What is the country of origin for your Moog K3161t and K3134t ball joints?
- Answer:
- As a Moog dealer we do not have that information. Put this link in a Google or Yahoo search: https://www.suspension.com/blog/where-are-moog-parts-made/. This will explain where Moog parts are manufactured.
- Question:
- I ordered part number k3161t. In the pic it showed the newer style non removeable dust boot but the zirc fitting was needle type and off to one side and had to be installed once pressed into axle . Dealer sent one of this style and one with old dust boot with zirc fitting in middle .
- Answer:
- It appears the dealer still had some of the older style of this ball joint. Same part just the older version.