add_shopping_cart Suggested Parts 2keyboard_arrow_down
While MOOG greaseable parts come greased from the factory, they should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.
Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.
Product Reviews for moog-k5108 | Front Upper Ball Joint | Chevrolet Monte Carlo | K5108
- 5 Star (13)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k5108
starstarstarstarstar" Good product. Easy install "
Installed on a 69 Camaro. They had already been replaced once before so install was easy. Just unbolted the bad ones and installed these.
verified_user Verified Buyer - Dennis Bruder - . MOOG moog-k5108 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
Works as expected!
verified_user Verified Buyer - Daniel J Putt - . MOOG moog-k5108 - 5 out of 5starstarstarstarstar" Very good ball joint "
Easy to install in my 68 chevelle works very well. I only use Moog parts.
verified_user Verified Buyer - Gregg Blomquist - . MOOG moog-k5108 - 5 out of 5starstarstarstarstar" nice "
Nice.
verified_user Verified Buyer - jim klein - . MOOG moog-k5108 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- I purchased a pair of Moog problem solver K5108 upper ball joints for my Chevelle. Instructions I found online on the Moog site indicate that a dust cover needs to be installed, however, neither box contains one. Are they no longer required? Do I need to purchase them separately?
- Answer:
- Moog has changed the design of moog-k5108. It no longer has the stamped steel retainer for the dust boot.
- Question:
- Are these 1 in longer than stock?
- Answer:
- No. All Moog parts are made to OEM specs.
- Question:
- Hi guys, I am looking to replace a pair of upper ball joints on my 1970 Chevelle. I bought a pair of random K5108 [ Read- Made in Taiwan!] ball joints and the 4 mounting holes do not line up with the A Arm.[Grrrr].... I have decided to order a pair of Moog K5108's from an Australian supplier of Moog. My question being, are you having similar feedback with your ball joints OR are they guaranteed to fit correctly?
- Answer:
- Moog manufacturers parts all over the world and they have very strict quality control. They will pull a part from the production line and check for quality. Moog part numbers are universal to the industry. You may have gotten a k5108 ball joint and i it was NOT a Moog part. ...see more
- Question:
- Is this the premium or standard ball joint?
- Answer:
- moog-k5108 is the Moog Problem Solver premium brand. Moog does sell their Quick Steer product. At DST or suspension.com we do not handle the Quick Steer product line.
- Question:
- What is the part number for the dust boot on the k5108 ball joint? I cannot find that part number anywhere.
- Answer:
- There is no part number for the dust boot on the k5108 ball joint. Moog does not sell their dust boots separately from their parts.
- Question:
- Is there away to purchase just the hardware out of the moog-k5108 ball joint kits?
- Answer:
- Unfortunately Moog does not sell their hard ware outside of their ball joint kits.
- Question:
- I have 1967 Chevelle front suspension, lost a grease fitting from lower ball joint. Can you help with a thread size of it?
- Answer:
- The grease zerk is 1/4x28 self tapping threads.