add_shopping_cart Suggested Parts 2keyboard_arrow_down
While MOOG greaseable parts come greased from the factory, they should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.
Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.
Product Reviews for moog-k6117t | Front Lower Ball Joint | Chevrolet G10 Van | K6117T
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k6117t
starstarstarstarstar" Review 2 Years Later "
They are doing fine. MOOG is the only way to go.
verified_user Verified Buyer - Steve Pesovich - . MOOG moog-k6117t - 5 out of 5question_answer Customer Questions and Answers
- Question:
- What is the length of part numbers K6141 and k6117t?
- Answer:
- Part number k6117t has a length of 3.850 inches and part number K6141 has a length of 3.480 inches.
- Question:
- Do you have a replacement boot that will fit the K6117T ball joint?
- Answer:
- Moog does not have replacement dust boots. I have universal polyurethane dust boots sold by size. Here is a link to them: https://www.suspension.com/universal-dust-boots.asp. Put that link in a Google/Yahoo search and it will bring the link up.
- Question:
- Will Moog ball joint K6117t fit in a 1981 Chevy C10 5.7L diesel.
- Answer:
- Per Moog yes this ball joint will fit the 1981 Chevy C10 5.7L diesel
- Question:
- What are the specs of part number k6117t?
- Answer:
- Part number k6117t has a height of 3.850 inches, inner diameter of 1.970 inches, stud taper per foot of .046, and a stud thread of .625-18.
- Question:
- What is the taper for the stud on part number Moog-K6117t?
- Answer:
- Moog-K6117t Specifications: Stud Taper Per Foot: 0.046 Stud Thread: 0.625-18
- Question:
- Is part number K5651 ball joint still made or is the K6117t the same as that one?
- Answer:
- The K5651 is no longer available. For fitment and specs on K6117t please follow this link: https://www.moog-suspension-parts.com/moog-k6117t
- Question:
- On K6617T what is the tapered size on the stud?
- Answer:
- For part number K6117T the Stud Taper Per Foot is 0.046 and the Stud Threads are 0.625-18