Front Upper Control Arm Bushing | Chevy Blazer 95-05

  • moog-k6411 360image 1
  • moog-k6411 Front Upper Control Arm Bushings
  • moog-k6411 Front Upper Control Arm Bushings
  • moog-k6411 Front Upper Control Arm Bushings
  • moog-k6411 Front Upper Control Arm Bushings
  • moog-k6411 360image large 1

Front Upper Control Arm Bushings

Manufacturer: MOOG
Part Number: moog-k6411
Price: $70.91

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Limited to ONE replacement during guarantee period

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Upper Control Arm Bushings moog-k6411 fits these vehicles:
Details

Front Upper Control Arm Bushing | Chevy Blazer 95-05

Enhanced over OE Design Kit Contains Front and Rear Bushing

Specific Fitment Distinctions:

  • Position: Front Upper.
  • Notes: Enhanced over OE Design; Kit Contains Front and Rear Bushing.
2003-2004 Chevrolet Blazer
  • (RWD) Submodels: LS, Xtreme
2005 Chevrolet Blazer
  • (RWD, Xtreme)
1998-1999 GMC Jimmy
  • (RWD) Submodels: SL, SLE, SLS, SLT
2000-2001 GMC Jimmy
  • (RWD) Submodels: SLE, SLS, SLT

RWD

  • 1998-2000 Isuzu Hombre
  • 1988 Oldsmobile Cutlass Supreme
Footnotes
  • 1 Kit Required Per Car
  • Problem Solver Bushing Kit provides additional ride and performance handling benefits

Moog Control Arm Bushings

Controlling Comfort and Steering

If your vehicle is suffering from early tire wear, handling issues, or loud noises under the chassis, you could be dealing with worn OE control arm bushings. Designed to attach the steering knuckle and wheel assembly to the vehicle, your control arms are a crucial part of your steering system. The bushings themselves absorb impacts from the road, smoothing and quieting your ride.

Moog Control Arm Bushing
Worn Rubber Bushing

Long-Term Performance and Long-Term Coverage

Moog crafts each of their bushings to either meet or exceed OE specifications. While the OE bushings might sag or rot away, Moog's control arm bushings are there for the long haul. Moog backs this up by covering all of their control arm bushings with a lifetime warranty handled in-house here at DST.

Fitment for moog-k6411

All Vehicles: Enhanced over OE Design; Kit Contains Front and Rear Bushing.

YearsMakeModelSubModelPositionDrive Wheel
1978 - 1981BuickCenturyFront Upper
1978 - 1987BuickRegalFront Upper
1995 - 2002ChevroletBlazerFront UpperRWD
2003 - 2004ChevroletBlazerLS, XtremeFront UpperRWD
2005ChevroletBlazerXtremeFront UpperRWD
1978 - 1987ChevroletEl CaminoFront Upper
1978 - 1983ChevroletMalibuFront Upper
1978 - 1988ChevroletMonte CarloFront Upper
1983 - 1994ChevroletS10 BlazerFront UpperRWD
1982ChevroletS10Front Upper
1983 - 2003ChevroletS10Front UpperRWD
1978 - 1987GMCCaballeroFront Upper
1992 - 1997GMCJimmyFront UpperRWD
1998 - 1999GMCJimmySL, SLE, SLS, SLTFront UpperRWD
2000 - 2001GMCJimmySLE, SLS, SLTFront UpperRWD
1983 - 1991GMCS15 JimmyFront UpperRWD
1982GMCS15Front Upper
1983 - 1990GMCS15Front UpperRWD
1991 - 2003GMCSonomaFront UpperRWD
1996 - 1997IsuzuHombreFront Upper
1998 - 2000IsuzuHombreFront UpperRWD
1978 - 1984OldsmobileCutlass CalaisFront Upper
1980 - 1983OldsmobileCutlass CruiserFront Upper
1978 - 1980, 1985 - 1987OldsmobileCutlass SalonFront Upper
1978 - 1987OldsmobileCutlass SupremeFront Upper
1988OldsmobileCutlass SupremeFront UpperRWD
1978 - 1981OldsmobileCutlassFront Upper
1982 - 1986PontiacBonnevilleFront Upper
1978 - 1980PontiacGrand AmFront Upper
1981PontiacGrand LeMansFront Upper
1978 - 1987PontiacGrand PrixFront Upper
1978 - 1981PontiacLeMansFront Upper

Canada Market Only (vehicles not sold in USA):

YearsMakeModelPosition
1985 - 1986OldsmobileCutlassFront Upper
1982PontiacGrand LeMansFront Upper

Canada / Mexico Market Only (vehicles not sold in USA):

YearsMakeModelPosition
1987OldsmobileCutlassFront Upper
GradePremium
MaterialSteel Clad Rubber
Mounting Hardware IncludedNo
OEM part numbers MOOG K6411 replaces

MOOG K6411 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

It also replaces these original equipment service part numbers.

Service brandService part number replaced
ACDelco45G8034

question_answer Customer Questions and Answers


Question:
Where are the suspension bushing, ball joints and tie rod end measurements? I'm tired of getting the wrong parts!
Answer:
The manufactures we offer do not list the dimensions or specs for their kits or parts. If the dimensions are shown publically competitors could copy them and make the parts without doing the research to make the part or kit.

Question:
Are these control arm bushings for the right side, left side, or both?
Answer:
moog-k6411 bushing will fit the left or right side upper control arm.

Question:
Is the price for what you see in picture 4 bushings?
Answer:
Yes moog-k6411 has 4 upper control arm bushings. This will do the left and right upper control arms.