lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Limited to ONE replacement during guarantee period
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Steering Idler Arm | '01-'10 Silverado 2500HD, '00-'12 Suburban 2500
Complete Package
Upgrading your truck for offroad adventures should include your suspension, tires, and....steering? Don't overlook the stress and workload the weight of larger wheels and tires adds to your front end and steering components. Ensure all aspects of your truck's performance are well rounded when you keep the steering of your 2001-2010 Silverado 2500HD up to snuff with a new Moog steering idler arm.
Firm Foundation
If you've experienced loose steering that makes it tough to keep your vehicle traveling in a straight line then you will appreciate the firm foundation a new steering idler arm will provide. A secure connection to the frame for the steering linkage on the opposite side of your steering box will stop the vibrations and vague handling caused by worn steering. Refresh your Chevy or GMC's front end with a new steering idler arm from Moog.
Regain Control
All the traction in the world won't do you much good if you can't control the direction it takes you. Worn out steering parts with loose tolerances that shift back and forth lack the control required for tires with more traction. Install a high quality Moog idler arm on your Silverado to tighten up your steering and regain the control needed for managing and directing heavier offroad wheels and tires.
Alignment Assist
Fixing your front end with a new idler arm not only improves your ability to harness your truck's traction, it also stops the shifts worn parts cause to your alignment. The side to side movement generated by a worn idler arm shifts your toe angle and accelerates wear on the edges of your tires. Save your tires from uneven tire wear when you select a Moog idler arm for your Suburban or Silverado.
| Overview | |
|---|---|
| Grade | Premium |
| Dimensions | |
|---|---|
| Length | 136mm (5.354 in) |
| What's included | |
|---|---|
| Mounting Hardware Included | Yes |
| Grease Fitting Included | Yes |
question_answer Customer Questions and Answers
- Question:
- Where does the foam ring go that came in the K6535HD Idler Arm kit?
- Answer:
- The foam or rubber ring is a grease boot or seal. Grease both sides of the boot/seal and install it over the tapered stud. Then in install the center link.
- Question:
- I am looking to rebuild front suspension. How do i know if i need 3 or 4 spline Idler arm and Pitman arm please?
- Answer:
- Not sure if a GM dealer will help you or not. Call a GM dealer and give them the VIN number. Ask if you have a 3 or 4 spline pitman arm. If they will not help remove the big nut and lock washer. With those items removed you will see if you have a 3 o or 4 groove pitman arm. ...see more
- Question:
- What comes in the kit K6535HD?
- Answer:
- The Idler Arm, cotter pin, boot, zerk, castle nut, and another nut comes in the kit K6535HD
- Question:
- What is the difference between your problem solver idler arm and your problem solver HD idler arm? And do the they both have the same size stud and taper?
- Answer:
- The tapered stud is the same size. moog-k6535hd has a better heat treating for the stud which makes it more durable that the moog-k6535.
- Question:
- How do I find out what pitman arm I need? I am wanting to replace the driver side and passenger side arms for the vehicle 2006 Chevy Silverado 2500 hD 4wd lbz.
- Answer:
- For the pitman arm you would need to know if you have a 3 or 4 groove output shaft on the steering gear. The easiest way to identify is to take the big 1 5/16 (I think) nut and lock washer off and to see if you have a 3 or 4 groove output shaft. Here e is a link to the pitman arms: Pitman arms. You see that their is a HD and OEM replacement arms. If you have a lift, bigger tires and wheels than stock I would go with the HD series. If your Chevy is not lifted and or bigger tires and wheels I would go with the OEM non HD versions. ...see more