Control Arm Bumper | Chevrolet C10 1975-1986

  • moog-k6607 360image 1
  • moog-k6607 Front Lower Control Arm Bump Stop
  • moog-k6607 Front Lower Control Arm Bump Stop
  • moog-k6607 Front Lower Control Arm Bump Stop
  • moog-k6607 Front Lower Control Arm Bump Stop
  • moog-k6607 360image large 1

Front Lower Control Arm Bump Stop

Manufacturer: MOOG
Part Number: moog-k6607
Price: $14.53

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Limited to ONE replacement during guarantee period

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Lower Control Arm Bump Stop moog-k6607 fits these vehicles:
Details

Control Arm Bumper | Chevrolet C10 1975-1986

2 Kits Required per Vehicle
Press-In Type

For 1973-1974 Chevrolet Blazer, 1975-1982 Chevrolet K5 Blazer, and 1973-1982 GMC Jimmy
  • Fits RWD Models ONLY
For 1973-1974 Chevrolet P30 Van, 1975-1978 GMC P35, 1973-1974 GMC P35/3500 Van, and 1979-1984 GMC P3500
  • Fits Models WITH Independent Front Suspension ONLY
MOOG moog-k6607

Product Reviews for Control Arm Bumper | Chevrolet C10 1975-1986

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k6607

5 out of 5 based on 1 user reviews. Write a Review

E
verified_user

starstarstarstarstar" very kewl "

Could not ask for better service, exact part for a great part. Thank you Emery

verified_user Verified Buyer - Emery Miller II - . MOOG moog-k6607 - 5 out of 5
Fitment for moog-k6607

All Vehicles: Press-In Type.

YearsMakeModelPositionDrive WheelNotes
1973 - 1974ChevroletBlazerFront LowerRWD
1973 - 1974ChevroletC10 PickupFront Lower
1973 - 1986ChevroletC10 SuburbanFront Lower
1975 - 1986ChevroletC10Front Lower
1973 - 1974ChevroletC20 PickupFront Lower
1968 - 1986ChevroletC20 SuburbanFront Lower
1975 - 1986ChevroletC20Front Lower
1973 - 1974ChevroletC30 PickupFront Lower
1975 - 1986ChevroletC30Front Lower
1973 - 1974ChevroletG10 VanFront Lower
1975 - 1995ChevroletG10Front Lower
1973 - 1974ChevroletG20 VanFront Lower
1975 - 1995ChevroletG20Front Lower
1975 - 1978ChevroletG30Front Lower
1975 - 1982ChevroletK5 BlazerFront LowerRWD
1973 - 1974ChevroletP10 VanFront Lower
1975 - 1980ChevroletP10Front Lower
1975 - 1984ChevroletP20Front Lower
1973 - 1974ChevroletP30 VanFront Lowerwith Independent Front Suspension
1975 - 1984ChevroletP30Front Lowerwith Independent Front Suspension
1987 - 1988ChevroletR10 SuburbanFront Lower
1987ChevroletR10Front Lower
1989 - 1991ChevroletR1500 SuburbanFront Lower
1987 - 1988ChevroletR20 SuburbanFront Lower
1987 - 1988ChevroletR20Front Lower
1989 - 1991ChevroletR2500 SuburbanFront Lower
1989ChevroletR2500Front Lower
1987 - 1988ChevroletR30Front Lower
1989 - 1991ChevroletR3500Front Lower
1975 - 1978GMCC15 SuburbanFront Lower
1973 - 1974GMCC15/C1500 PickupFront Lower
1973 - 1974GMCC15/C1500 SuburbanFront Lower
1979 - 1986GMCC1500 SuburbanFront Lower
1979 - 1986GMCC1500Front Lower
1975 - 1978GMCC15Front Lower
1975 - 1978GMCC25 SuburbanFront Lower
1973 - 1974GMCC25/C2500 PickupFront Lower
1973 - 1974GMCC25/C2500 SuburbanFront Lower
1979 - 1986GMCC2500 SuburbanFront Lower
1979 - 1986GMCC2500Front Lower
1975 - 1978GMCC25Front Lower
1971 - 1974GMCC35/C3500 PickupFront Lower
1979 - 1986GMCC3500Front Lower
1975 - 1978GMCC35Front Lower
1973 - 1974GMCG15/G1500 VanFront Lower
1979 - 1995GMCG1500Front Lower
1975 - 1978GMCG15Front Lower
1973 - 1974GMCG25/G2500 VanFront Lower
1979 - 1995GMCG2500Front Lower
1975 - 1978GMCG25Front Lower
1975 - 1978GMCG35Front Lower
1973 - 1982GMCJimmyFront LowerRWD
1973 - 1974GMCP15/P1500 VanFront Lower
1979 - 1980GMCP1500Front Lower
1975 - 1978GMCP15Front Lower
1979 - 1984GMCP2500Front Lower
1975 - 1978GMCP25Front Lower
1973 - 1974GMCP35/P3500 VanFront Lowerwith Independent Front Suspension
1979 - 1984GMCP3500Front Lowerwith Independent Front Suspension
1975 - 1978GMCP35Front Lowerwith Independent Front Suspension
1987 - 1991GMCR1500 SuburbanFront Lower
1987GMCR1500Front Lower
1987 - 1991GMCR2500 SuburbanFront Lower
1987 - 1989GMCR2500Front Lower
1987 - 1991GMCR3500Front Lower
GradePremium
OEM part numbers MOOG K6607 replaces

MOOG K6607 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
General Motors14007189
General Motors349442
General Motors7828963

question_answer Customer Questions and Answers


Question:
Are these rubber or urethane?
Answer:
moog-k6607 is made of rubber.

Question:
I'm trying to install MOOG K6607 bumper on lower control arm. It was easy to pry off the old worn bumper, but the new one is resisting. Do you have any installation tips to get the new ones to pop in?
Answer:
Clean the slot the bump stop goes through with sand paper or emery cloth. Remove any burrs. Use some spray grease (silicone or WD40) on the barbed end and slot. Push the barbed end in the slot and grab the end with pliers or needle nose pliers and pu ull it through. ...see more