add_shopping_cart Suggested Parts 2keyboard_arrow_down
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
With these innovations that you can only get from Moog it's no surprise that they're so confident in their parts.
Fix Your SUV With Moog
Having Trouble Out of Your SUV Lately?
You'd been told that all the steering problems you've been having in your SUV, such as shimmying in the front end, uneven tire wear, and looseness in the steering wheel, is all a result of a bad ball joint. Naturally, you went got a new one and, being a do it yourselfer, tried to install it yourself. Well if you didn't buy Moog then it was probably really hard to install and you probably didn't even have the proper tools. You may have tried to improvise and if you did the OE replacement joint may be damaged. If so you're looking for a new ball joint. Look no further because the experts at DST have the solution to your problems. That solution is Moog's lower ball joint K6663.


OE Design Flaws
The OE ball joint for your SUV had a few major problems that lead to you having to replace the ball joint in the first place. Firstly, the stud ball diameter did not provide sufficient load carrying capability, especially in rough service conditions. The OE ball joint design wasn't serviceable. This means that the OE ball joint can't flush out the harmful road contaminates, which leads to premature wear and corrosion.
Moog Problem Solver
Moog has seen these OE design flaws and has taken them and improved the overall design of their ball joints. To start off with Moog has included a snap-ring to make installation easier; avoiding the need for special tools. The snap-ring in combination with the knurled housing will keep the housing in place. Moog's greaseable design allows you to flush out the harmful road contaminates that lead to premature wear. K6663 also comes equipped with a polychloroprene boot with a grease-relief valve that keeps out contaminants out while providing a sealed, serviceable ball joint.


Powdered-Metal Gusher Bearings
K6339 also comes with Moog's powdered-metal gusher bearings. This unique design allows the grease to flow through the bearing. It also allows for even distribution across the entire surface of the bearing. This provides greater strength and durability than the OE plastic bearing. It also resists wearing better than the convention designs.
Moog's Lifetime Warranty
With these innovations that you can only get from Moog it's no surprise that they're so confident in their parts. Their confidence is reflected in Moog's lifetime warranty that DST's customer service team will handle for you if you ever need to replace K6663. This will save you the time and hassle of long phone calls with warranty claims.


Product Reviews for Front Lower Ball Joint | Buick Rainier | MOOG-K6663
- 5 Star (3)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k6663
starstarstarstarstar" Review 1 Year Later "
Very satisfied with the parts and your companys excellent service, thank you so much.
verified_user Verified Buyer - Tammy Oaks - . MOOG moog-k6663 - 5 out of 5starstarstarstarstar" great "
I am really impressed with fast shipping and great prices.
verified_user Verified Buyer - robert c. - . MOOG moog-k6663 - 5 out of 5starstarstarstarstar" Easy to install if you have the right tools. "
I did this job by my garage. Its an easy job to do if you have the right tools. You will need a ball joint press to remove and install. I have to remove the whole steering knuckle by disconnecting the front axle nut and tie rods. Since the whole steering knuckle has to come out, I changed the upper and lower ball joints. The Moog ball joints fits like a glove and when I did a test drive, my Bravada feels tight and no noise. Looking forward to future purchases with this company. Many Thanks!!!
verified_user Verified Buyer - Ely Yee - . MOOG moog-k6663 - 5 out of 5