moog-k7025 | Front Lower Ball Joint | Chrysler Imperial | MOOG-K7025

  • moog-k7025 360image 1
  • moog-k7025 Front Lower Ball Joint - Standard Suspension
  • moog-k7025 Front Lower Ball Joint - Standard Suspension
  • moog-k7025 Front Lower Ball Joint - Standard Suspension
  • moog-k7025 Front Lower Ball Joint - Standard Suspension
  • moog-k7025 360image large 1

Front Lower Ball Joint - Standard Suspension

Manufacturer: MOOG
Part Number: moog-k7025
Price: $68.09

check_box In Stock check_box Ships Immediately

Suggested part for moog-k7025: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
While MOOG greaseable parts come greased from the factory, they should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k7025: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Lower Ball Joint - Standard Suspension moog-k7025 fits these vehicles:

moog-k7025 | Front Lower Ball Joint | Chrysler Imperial | MOOG-K7025

Fits Left or Right Side. If Original Ball Joint has 4 wrench flats - it is threaded and must be replaced by K727 threaded ball joint. 3/4 Ton Pickup Models and 1 Ton Van Models with Heavy Duty Suspension will use a different part.

Moog Problem Solver Ball Joints

Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.

Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.

Ball Joints Moog
moog ball joint


Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

Fitment for moog-k7025
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
ChryslerImperial1975-1967Front Lower Quantity 2
ChryslerNew Yorker1978-1974Front Lower Quantity 2
ChryslerNewport1978-1974Front Lower Quantity 2
ChryslerTown & Country1977-1974Front Lower Quantity 2
DodgeB1001980-1975Front Lower Quantity 2
DodgeB100 Van1974-1971Front Lower Quantity 2
DodgeB1501994-1981Front Lower Quantity 2
DodgeB15001998-1995Front Lower Quantity 2
DodgeB2001980-1975Front Lower Quantity 2
DodgeB200 Van1974-1971Front Lower Quantity 2
DodgeB2501994-1981Front Lower Quantity 2
DodgeB25001998-1995Front Lower Quantity 2
DodgeB3001980-1975Front Lower Quantity 2
DodgeB300 Van1974-1971Front Lower Quantity 2
DodgeB3501994-1981Front Lower Quantity 2
DodgeB35001997-1995Front Lower Quantity 2
DodgeCB3001980-1973Front Lower Quantity 2
DodgeD1001989-1975Front Lower Quantity 2
DodgeD100 Pickup1974-1972Front Lower Quantity 2
DodgeD1501993-1977Front Lower Quantity 2
DodgeD2001980-1975Front Lower Quantity 2
DodgeD200 Pickup1974-1972Front Lower Quantity 2
DodgeD2501993-1981Front Lower Quantity 2
DodgeDakota1996-1987Front LowerRWD Quantity 2
DodgeMonaco1976-1974Front Lower Quantity 2
DodgeRam 1500 Van2000-1999Front Lower Quantity 2
DodgeRam 2500 Van2000-1999Front Lower Quantity 2
DodgeRam 3500 Van2000-1999Front Lower Quantity 2
DodgeRamcharger1993-1974Front LowerRWD Quantity 2
DodgeRoyal Monaco1977-1975Front Lower Quantity 2
FargoB200 Van1972-1971Front Lower Quantity 2
FargoB300 Van1972-1971Front Lower Quantity 2
FargoD100 Pickup1972Front Lower Quantity 2
FargoD200 Pickup1972Front Lower Quantity 2
PlymouthFury1974Front Lower Quantity 2
PlymouthFury I1974Front Lower Quantity 2
PlymouthFury II1974Front Lower Quantity 2
PlymouthGran Fury1977-1975Front Lower Quantity 2
PlymouthPB1001980-1975Front Lower Quantity 2
PlymouthPB100 Van1974Front Lower Quantity 2
PlymouthPB1501983-1981Front Lower Quantity 2
PlymouthPB2001980-1975Front Lower Quantity 2
PlymouthPB200 Van1974Front Lower Quantity 2
PlymouthPB2501983-1981Front Lower Quantity 2
PlymouthPB3001980-1975Front Lower Quantity 2
PlymouthPB300 Van1974Front Lower Quantity 2
PlymouthPB3501983-1981Front Lower Quantity 2
PlymouthTrailduster1981-1975Front LowerRWD Quantity 2

question_answer Customer Questions and Answers

Is there also a oversized lower ball joint?
Moog does not make an oversize lower ball joint. If this ball joint is loose in the control arm, the control arm will have to be replaced.