add_shopping_cart Suggested Parts 2keyboard_arrow_down
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.
Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.
Product Reviews for moog-k7411 | Front Lower Ball Joint | Dodge Ram 1500 | K7411
- 5 Star (4)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k7411
starstarstarstarstar" Good to go "
Ball joint seems to be built very well.
verified_user Verified Buyer - Micheal Garcia - . MOOG moog-k7411 - 5 out of 5starstarstarstarstar" Great product, fit perfectly! "
Quality parts, mechanic loved working with these quality parts! Great price and free shipping with fast delivery
verified_user Verified Buyer - David Lundquist - . MOOG moog-k7411 - 5 out of 5starstarstarstarstar" Impressive "
Easy to install with a standard bearing/bushing install and remover kit. Did not need any special tools.
verified_user Verified Buyer - Manuel Britt - . MOOG moog-k7411 - 5 out of 5starstarstarstarstar
Part been installed for a couple of months and have had no problems.
verified_user Verified Buyer - William Marshall - . MOOG moog-k7411 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Did the moog-k7411 have a new design where it no longer needs a boot?
- Answer:
- The moog-k7411 will have a new designed integrated boot. This means the boot will not be the usual big bulky boot that the older ball joints have. This Integrated boot keeps the grease closer to the gusher bearing and hes better protected from being damaged on install. ...see more
- Question:
- Will part number k7411 fit my 2004 Dodge Ram 1500 2WD?
- Answer:
- Yes, part number k7411 will fit the 2004 Dodge Ram 1500 2WD.
- Question:
- What is the difference between the K7411 vs the K7467 on the 2008 dodge ram 1500?
- Answer:
- Part number K7411 is for the 5 lug wheels and part number K7467 is for the 8 lug wheels.
- Question:
- Do you sell the zerk fittings separately from part number k7411?
- Answer:
- No, Moog does not sell the zerk fittings separately from their parts.
- Question:
- I am looking for a Moog ball joint that has the mount plate because mine is the factory rivet style I know they make them because this is my second go around they come with 4 bolts that take the place of the rivets it comes as unit and you don't have to press them out.
- Answer:
- Moog only makes a press in ball joint. k7411
- Question:
- Broke the zerk when installing the k7411 lower ball joint with the internal dust boot . Does it come pre packed with grease. I don't want to tear it all apart again. Not enough room to use a extractor.
- Answer:
- The ball joint does have grease in it to preserve it while it sits on the shelf. The ball joint must be greased after is is installed and every oil change. You have to find some way to get the broken off zerk out and install a new one.
- Question:
- I have the newer style k7411 ball joints with the slender boot. I notice a green dot on each ball joint does it have to be in any specific orientation? I know the K7411 is a 360% rotation but whats the green dot on the ball joint for and there is no explanation in the instructions.
- Answer:
- The green dot is a quality control inspection mark. It means it has been tested and passed.
- Question:
- Question about the Moog K7411 ball joint, specifically the Zerk fitting. I need to change the supplied 90 degree Zerk fitting with a straight one to make reaching the fitting easier for greasing. Is the Zerk fitting SAE or metric, and what is the thread size?
- Answer:
- The grease zerk should be SAE 1/4x18 self tapping threads.
- Question:
- With the new boot on these joints it has a large amount of shaft showing. Just curious if this is normal.
- Answer:
- Yes it is normal for the tapered stud to not be covered all the way to the spindle like the old external dust boot design.
- Question:
- Will moog-k7411 fit my 2006 Dodge Ram?
- Answer:
- Yes, Part Number moog-k7411 will fit your 2006 Dodge Ram truck.
- Question:
- What grease should I use for part number moog-k7411 and moog-rk7424?
- Answer:
- Moog suggest that you should use a 100% synthetic grease on your Moog parts. Moog does not have a brand they suggest, just that you should use a 100% synthetic grease on their greaseable parts.
- Question:
- What is the Thread size on the moog-k7411?
- Answer:
- The moog-k7411 has a Stud Thread of m16x1.5.
- Question:
- Is the k7411 the proper fitment for a 2005 dodge ram 1500 st 4x4 with torsion bar leveling?
- Answer:
- Yes, part number k7411 will fit the 2005 dodge ram 1500 st 4x4.
- Question:
- Do you sell just the dust boot for k7411?
- Answer:
- No Moog does not sell just the dust boot.