moog-k772 | Front Upper Ball Joint | Dodge, Chrysley and Plymouth

  • moog-k772 360image 1
  • moog-k772 Front Upper Ball Joint
  • moog-k772 Front Upper Ball Joint
  • moog-k772 Front Upper Ball Joint
  • moog-k772 Front Upper Ball Joint
  • moog-k772 360image large 1

Front Upper Ball Joint

Manufacturer: MOOG
Part Number: moog-k772
Price: $29.46

check_box In Stock check_box Ships Immediately


Suggested part for moog-k772: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k772: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Upper Ball Joint moog-k772 fits these vehicles:
Details

moog-k772 | Front Upper Ball Joint | Dodge, Chrysley and Plymouth

Fits Left or Right Side

Moog Problem Solver Ball Joints

Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.

Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.

Ball Joints Moog
moog ball joint

Warranty

Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

MOOG moog-k772

Product Reviews for moog-k772 | Front Upper Ball Joint | Dodge, Chrysley and Plymouth

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k772

5 out of 5 based on 2 user reviews. Write a Review

D
verified_user

starstarstarstarstar" Moog parts has always been the best "

Fit as should.

verified_user Verified Buyer - - . MOOG moog-k772 - 5 out of 5
G
verified_user

starstarstarstarstar" Great product! "

This ball joint made a difference I was not expecting. I would highly recommend!

verified_user Verified Buyer - - . MOOG moog-k772 - 5 out of 5
Fitment for moog-k772
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
Chrysler3001971-1962Front Upper Quantity 2
ChryslerCordoba1983-1975Front Upper Quantity 2
ChryslerFifth Avenue1989-1983Front Upper Quantity 2
ChryslerImperial1983-1981Front Upper Quantity 2
ChryslerLeBaron1981-1977Front Upper Quantity 2
ChryslerNew Yorker1982-1963Front Upper Quantity 2
ChryslerNewport1981-1961Front Upper Quantity 2
ChryslerTown & Country1981-1966Front Upper Quantity 2
ChryslerTown & Country1965-1963Front Upper Quantity 2 6.7L V8 6769cc/413cid
ChryslerTown & Country1964-1961Front Upper Quantity 2 5.9L V8 5917cc/361cid
ChryslerTown & Country1960-1959Front Upper Quantity 2 6.3L V8 6286cc/383cid
ChryslerTown & Country1958Front Upper Quantity 2 5.8L V8 5802cc/354cid
ChryslerWindsor1961-1958Front Upper Quantity 2
DeSotoAdventurer1960Front Upper Quantity 2
DeSotoDeSoto1961Front Upper Quantity 2
DeSotoFireflite1960Front Upper Quantity 2
DeSotoFiresweep1959-1957Front Upper Quantity 2
Dodge3301964-1963Front Upper Quantity 2
Dodge4401964-1963Front Upper Quantity 2
Dodge8801964-1962Front Upper Quantity 2
DodgeA1001964Front Upper Quantity 2
DodgeA100 Truck1964Front Upper Quantity 2
DodgeAspen1980-1976Front Upper Quantity 2
DodgeChallenger1974-1970Front Upper Quantity 2
DodgeCharger1978-1966Front Upper Quantity 2
DodgeCoronet1976-1957Front Upper Quantity 2
DodgeCustom1959-1957Front Upper Quantity 2
DodgeDart1976-1960Front Upper Quantity 2
DodgeDiplomat1989-1977Front Upper Quantity 2
DodgeLancer1959-1957Front Upper Quantity 2
DodgeMagnum1979-1978Front Upper Quantity 2
DodgeMatador1960Front Upper Quantity 2
DodgeMirada1983-1980Front Upper Quantity 2
DodgeMonaco1978-1965Front Upper Quantity 2
DodgePolara1973-1960Front Upper Quantity 2
DodgeSeneca1961-1960Front Upper Quantity 2
DodgeSierra1959Front Upper Quantity 2
DodgeSt. Regis1981-1979Front Upper Quantity 2
DodgeSuburban1958-1957Front Upper Quantity 2
FargoA100 Van1964Front Upper Quantity 2
PlymouthBarracuda1974-1970Front Upper Quantity 2
PlymouthBelvedere1970-1957Front Upper Quantity 2
PlymouthBelvedere II1967-1965Front Upper Quantity 2
PlymouthCaravelle1989-1978Front Upper Quantity 2
PlymouthCuda1974-1970Front Upper Quantity 2
PlymouthDuster1976-1973Front Upper Quantity 2
PlymouthFleet Special1963-1962Front Upper Quantity 2
PlymouthFury1978-1957Front Upper Quantity 2
PlymouthFury I1973-1968Front Upper Quantity 2
PlymouthFury II1973-1965Front Upper Quantity 2
PlymouthFury III1973-1965Front Upper Quantity 2
PlymouthGran Fury1989-1972Front Upper Quantity 2
PlymouthGTX1971-1967Front Upper Quantity 2
PlymouthPlaza1958-1957Front Upper Quantity 2
PlymouthRoadrunner1975-1968Front Upper Quantity 2
PlymouthSatellite1974-1965Front Upper Quantity 2
PlymouthSavoy1964-1957Front Upper Quantity 2
PlymouthScamp1976-1973Front Upper Quantity 2
PlymouthSuburban1961-1957Front Upper Quantity 2
PlymouthSuperbird1970Front Upper Quantity 2
PlymouthValiant1976-1973Front Upper Quantity 2
PlymouthVolare1980-1976Front Upper Quantity 2

question_answer Customer Questions and Answers


Question:
What is the difference between the ball joints K772, K778, K719, and K727 lower early Chrysler parts?
Answer:
Differences are: K772 6.3L front upper Height = 3.550 in Outer Diameter = 1.900 in Length = 3.550 in K778 6.7L front uppers https://www.suspension.com/moog-k778 Height = 4.560 in Outer Diameter = 2.020 in Length = 4.560 K719 6.3L front lower https://www.suspension.com/moog-k719 Height = 3.790 in Outer Diameter = 2.120 in Length = 3.790 in K727 6.7L front lowers https://www.suspension.com/moog-k7271 Height = 3.920 in Outer Diameter = 2.310 in Inner Diameter = 2.010 in Length = 3.920 in ...see more

Question:
What is the difference between part numbers K772 and K704?
Answer:
Part number K772 has a stud thread of .562-18 and includes new washers and part number K704 has a stud thread of .437-20 and does not include the washers.

Question:
Where can I get just the dust boots for part number k772?
Answer:
Moog does not offer the dust boots. You can find the dust boots at https://www.suspension.com/universal-dust-boots.asp

Question:
Where does the washer go on part number k772?
Answer:
For part number k772, the washer will go on right under the castle nut.

Question:
Do you sell the tie rod end boots separately from the tie rod ends?
Answer:
Moog does not sell just the dust boot. We offer universal polyurethane dust boots that are sold by dimensions. Here is a link to them: https://www.suspension.com/universal-dust-boots.asp. Put this link in a Google or Yahoo search and it should displa ay. ...see more

Question:
Are k772 ball joints pressed in or screwed in?
Answer:
moog-k772 is a screw in ball joint.

Question:
Looking for K772 ball joint dust cover.
Answer:
Moog does not offer just the dust boots. I have universal polyurethane dust boots sold by dimensions. Put this link in a Google or Yahoo search: https://www.suspension.com/universal-dust-boots.asp. It will show the link.

Question:
Just looking for the boots for K772.
Answer:
Moog does not offer the dust boots. I have universal polyurethane dust boots sold by dimensions. Put this link in a Google or Yahoo search: https://www.suspension.com/universal-dust-boots.asp. This will help with the dimensions from your dust boots.

Question:
What specifications can you provide for the moog-k772?
Answer:
The moog-k772 will have a Height of 3.55

Question:
Do you have the installation instructions for the k772? I dont know where the washer goes.
Answer:
You can find the instructions for part number k772 at https://fme-cat.com/livedocs/AXCF2619.pdf. The washer will go right under the cotter pin.

Question:
Is the moog-k772 the same as the moog-k727? Can they be interchangeable?
Answer:
The moog-k772 and the moog-k727 are not the same and are not interchangeable. The moog-k727 is a little big bigger than the moog-k772.

Question:
What is the stud thread size on part number k772?
Answer:
On part number k772, the stud thread is .562-18.

Question:
Do you sell just the dust boots for part number K772?
Answer:
No, Moog does not sell their dust boots separately from the ball joints. However, we do have polyurethane options available at https://www.suspension.com/universal-dust-boots.asp

Question:
Does this have a dust boot?
Answer:
Yes, part number moog-k772 does come with a dust boot.

Question:
Are part numbers k772 and k719 available with the integral dust boots?
Answer:
No, neither the k772 or the k719 have the integral dust boot.