unarchive In The Box of moog-k80296 keyboard_arrow_down
- Qty 1 Stabilizer Bar Link (Not sold in pairs)
add_shopping_cart Suggested Parts 1keyboard_arrow_down
Grease Gun Combo
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
shuffle Cross References 1keyboard_arrow_down
. Standard OE replacement.
Price: $34.22
Warranty: 3 Years or 50000 Miles
moog-k80296 | Front Sway Bar End Link Replacement | 05-12 Ford Escape
Moog's Sway Bar Endlinks
A sway bar, or anti-roll bar, is designed to keep all four wheels solidly in contact with the road, track, or trail during a turn. But your sway bar doesn't do this job alone. Sway bar endlinks connect the sway bar to the rest of your suspension. Without these links your sway bar would just hang there, taking up space. Similarly, if your links are damaged or worn then your sway bar will not be performing at it's best.
Moog's line of sway bar endlinks come in a variety of shapes and styles, each one designed specifically for the vehicle it's listed for. Known for their high-quality parts, Moog stays true to form with each of their endlink designs. Maximize your vehicle's performance and value with a set of Moog's sway bar endlinks, all covered by Moog's lifetime warranty handled in-house here at DST.
question_answer Customer Questions and Answers
- Question:
- How many end links are included in the K80296 kit?
- Answer:
- Only one end link is included in the K80296 kit. You will need to purchase 2 kits to get both.
- Question:
- Moog-K80296 - Front Sway Bar End Link - Ford Escape 2010 - Are your sway bar links pre-greased or do I need to grease them?
- Answer:
- Part number Moog-K80296 will come with a small amount of grease in them, Moog suggest to grease these upon install then again after every other oil change.
- Question:
- Does this part K80296 work for left and right side?
- Answer:
- Yes, it will work for the left and right side. so you will need two kits per vehicle.
- Question:
- K80296 - Front Sway Bar End Link- Are these single or are they in pairs?
- Answer:
- Moog-K80296 is sold as a single endlink. You will need two of this kit to cover left and right sides.
- Question:
- I just had k80296 installed, how often should I grease it?
- Answer:
- On part number moog-K80296 we recommend greasing them every oil change.
- Question:
- What type of grease should I use for part number k80296?
- Answer:
- For part number k80296, you would want to use a 100% synthetic grease. We recommend the Lucas Heavy Duty grease.
- Question:
- Sway bar end link (front)- is there a left or right with this part or it could be use on either side?
- Answer:
- moog-k80296 will fit the left or right side of the vehicle.
- Question:
- Is this an OE design or an improved design?
- Answer:
- moog-k80296 would be the Problem Solver end link. It is greaseable.
- Question:
- When buying the front end stabilizer bar links (part # K80296) new, are they already properly greased from the factory, or do you have to add grease upon installation? How do you know when fitting is fully greased?
- Answer:
- The end link has grease injected after it is assembled. This is to preserve the part while it sits on the shelf. It must be greased after it was installed and every oil change. When you pump grease in to the end link watch the dust boots. When they s start to expand stop. ...see more
- Question:
- What do you use to grease sway bar links? How do add grease to them?
- Answer:
- Put this link in a Google or Yahoo search: https://www.suspension.com/blog/how-to-grease-ball-joints/. It will show all the information you need.
- Question:
- Does original Moog parts have stamped Moog on the part?
- Answer:
- Some parts do have Moog stamped or laser etched in the part. Some parts are not marked.
- Question:
- What type of grease is recommended for maintenance with the stabilizer links?
- Answer:
- Any good quality HD chassis grease with the NLGI rating or certification.
- Question:
- All pictures show only one end with a grease fitting.
- Answer:
- Moog-k80296 both ends are greaseable. Look closely and you will see 2 grease zerks.