moog-k80647 | Front Lower Ball Joint | Nissan Titan | MOOG-K80647

  • moog-k80647 360image 1
  • moog-k80647 Front Lower Ball Joint
  • moog-k80647 Front Lower Ball Joint
  • moog-k80647 Front Lower Ball Joint
  • moog-k80647 Front Lower Ball Joint
  • moog-k80647 360image large 1

Front Lower Ball Joint

Manufacturer: MOOG
Part Number: moog-k80647
Price: $73.86

check_box In Stock check_box Ships Immediately

Suggested part for moog-k80647: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k80647: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Lower Ball Joint moog-k80647 fits these vehicles:

moog-k80647 | Front Lower Ball Joint | Nissan Titan | MOOG-K80647

Both New and Original Designs can be Installed on Vehicle

Moog Problem Solver Ball Joints

Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.

Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.

Ball Joints Moog
moog ball joint


Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

Fitment for moog-k80647
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
InfinitiQX562010-2004Front Lower Quantity 2
NissanArmada2015-2005Front Lower Quantity 2
NissanFrontier2017-2005Front Lower Quantity 2
NissanPathfinder2012-2005Front Lower Quantity 2
NissanPathfinder Armada2004Front Lower Quantity 2
NissanTitan2015-2004Front Lower Quantity 2
NissanXterra2015-2005Front Lower Quantity 2
SuzukiEquator2012-2009Front Lower Quantity 2

question_answer Customer Questions and Answers

Do these come pre-greased?
After the ball joint is assembled Moog injects grease to preserve it while it sets on the shelf. After the ball joint is installed it must be greased and every oil change.

Moog lower arm ball joint how many come in the box? Do I need two to do my front end.
All Moog ball joints are sold individually.

On ball joint #K 80647 are the grease fitting threads metric or SAE?
The grease zerk should be 1/4x28 self tapping threads.

I recently ordered a set of lower front ball joints, after having them installed by my mechanic, I noticed that one of them didn't seem to have a boot, is that kosher or did they forget to include the boot for that one.. I don't want to complain to my mechanic before I find out for sure!
Moog has redesigned moog-k80647. It no longer has the external dust boot. It has the integral dust boot that is built into the ball joint.

Does part number k80647 come with the new dust boot as well?
Yes, part number k80647 will come with the new dust boot. It is Moog's updated integral design dust boot, so it sits on the inside of the ball joint rather than the outside now.

Hi, I wonder if the K80647 would suit my car. In Europe, you recommend the NI-BJ-4926 but I would like to be able to grease now and then and therefore the American version looks nicer. Can't find the dimensions on your website for the product.
The Navarra is not available in the US. So I cannot ensure this will ball joint will fit. Moog does not supply their dealers the dimensions of their ball joints.