Axle Pivot Bushing | Ford Bronco 1980-1996

  • moog-k8292 360image 1
  • moog-k8292 Axle Pivot Arm Bushing
  • moog-k8292 Axle Pivot Arm Bushing
  • moog-k8292 Axle Pivot Arm Bushing
  • moog-k8292 Axle Pivot Arm Bushing
  • moog-k8292 Axle Pivot Arm Bushing
  • moog-k8292 360image large 1

Axle Pivot Arm Bushing

Manufacturer: MOOG
Part Number: moog-k8292
Price: $23.40

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Limited to ONE replacement during guarantee period

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentAxle Pivot Arm Bushing moog-k8292 fits these vehicles:
Details

Axle Pivot Bushing | Ford Bronco 1980-1996

2 Required Per Vehicle Standard Design

Specific Fitment Distinctions:

  • Position: Front.
  • Notes: Standard Design.

From 8/4/81; with Stamped Axle
RWD, From 8/4/81; with BALL JOINT Suspension

  • 1981 Ford F-100
  • 1981 Ford F-150

Thru 5/31/83

  • 1983 Ford F-100
  • 1983 Ford F-150
1985 Ford F-350
  • (4WD, Thru 1/31/85; without Monobeam Axle)
MOOG moog-k8292

Product Reviews for Axle Pivot Bushing | Ford Bronco 1980-1996

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k8292

5 out of 5 based on 1 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Review 2 Years Later "

These bushings are like new....but then they have less than 2,000 miles on them as do not drive this truck on a daily basis.\n

verified_user Verified Buyer - James T Scheuer - . MOOG moog-k8292 - 5 out of 5
Fitment for moog-k8292

All Vehicles: Standard Design.

YearsMakeModelPositionDrive WheelNotes
1984 - 1985FordBronco IIFront
1986 - 1990FordBronco IIFront4WD
1980 - 1996FordBroncoFront
1991 - 1994FordExplorerFront4WD
1981FordF-100FrontRWDFrom 8/4/81; with BALL JOINT Suspension, From 8/4/81; with Stamped Axle
1982FordF-100Front
1983FordF-100FrontThru 5/31/83
1980, 1984 - 1997FordF-150Front4WD
1981FordF-150Front4WD, RWDFrom 8/4/81; with BALL JOINT Suspension, From 8/4/81; with Stamped Axle
1982FordF-150Front
1983FordF-150Front4WDThru 5/31/83
1997FordF-250 HDFront4WD
1980 - 1996FordF-250Front4WD
1980 - 1984FordF-350Front4WD
1985FordF-350Front4WDThru 1/31/85; without Monobeam Axle
1983 - 1997FordRangerFront4WD
1995 - 1996MazdaB2300Front4WD
1994 - 1996MazdaB3000Front4WD
1994 - 1997MazdaB4000Front4WD
1991MazdaNavajoFront
1992 - 1994MazdaNavajoFront4WD
Overview
GradePremium
Dimensions
Length45.5mm (1.79 in)
Outside Diameter21.8mm (0.86 in)
Inside Diameter14.5mm (0.57 in)
Materials, color & finish
MaterialSteel Clad Rubber
What's included
Mounting Hardware IncludedNo
OEM part numbers MOOG K8292 replaces

MOOG K8292 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
FordE0TZ-3B177A
FordE0TZ-3B177B
FordE1TZ-3B177A
MazdaZZL034470
MazdaZZLO-34-470