Axle Pivot Bushing | Ford Bronco 1980-1996

  • moog-k8620 360image 1
  • moog-k8620 Axle Pivot Bushing
  • moog-k8620 Axle Pivot Bushing
  • moog-k8620 Axle Pivot Bushing
  • moog-k8620 Axle Pivot Bushing
  • moog-k8620 360image large 1

Axle Pivot Bushing

Manufacturer: MOOG
Part Number: moog-k8620
Price: $80.64

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Limited to ONE replacement during guarantee period

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentAxle Pivot Bushing moog-k8620 fits these vehicles:
Details

Axle Pivot Bushing | Ford Bronco 1980-1996

Enhanced over OE Design

Specific Fitment Distinctions:

  • Position: Front.
  • Notes: Enhanced over OE Design.

From 8/4/81; with Stamped Axle
RWD, From 8/4/81; with BALL JOINT Suspension

  • 1981 Ford F-100
  • 1981 Ford F-150

Thru 5/31/83

  • 1983 Ford F-100
  • 1983 Ford F-150
1985 Ford F-350
  • (4WD, Thru 1/31/85; without Monobeam Axle)
MOOG moog-k8620

Product Reviews for Axle Pivot Bushing | Ford Bronco 1980-1996

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k8620

5 out of 5 based on 1 user reviews. Write a Review

E
verified_user

starstarstarstarstar" Great "

Great products and were easy to install.

verified_user Verified Buyer - Everardo Garcia - . MOOG moog-k8620 - 5 out of 5
Fitment for moog-k8620

All Vehicles: Enhanced over OE Design.

YearsMakeModelPositionDrive WheelNotes
1984 - 1985FordBronco IIFront
1986 - 1990FordBronco IIFront4WD
1980 - 1996FordBroncoFront
1991 - 1994FordExplorerFront4WD
1981FordF-100FrontRWDFrom 8/4/81; with BALL JOINT Suspension, From 8/4/81; with Stamped Axle
1982FordF-100Front
1983FordF-100FrontThru 5/31/83
1980, 1984 - 1997FordF-150Front4WD
1981FordF-150Front4WD, RWDFrom 8/4/81; with BALL JOINT Suspension, From 8/4/81; with Stamped Axle
1982FordF-150Front
1983FordF-150Front4WDThru 5/31/83
1997FordF-250 HDFront4WD
1980 - 1996FordF-250Front4WD
1980 - 1984FordF-350Front4WD
1985FordF-350Front4WDThru 1/31/85; without Monobeam Axle
1983 - 1997FordRangerFront4WD
1995 - 1996MazdaB2300Front4WD
1994 - 1996MazdaB3000Front4WD
1994 - 1997MazdaB4000Front4WD
1991MazdaNavajoFront
1992 - 1994MazdaNavajoFront4WD
GradePremium
MaterialSteel Clad Rubber
Mounting Hardware IncludedNo
OEM part numbers MOOG K8620 replaces

MOOG K8620 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
FordE0TZ-3B177A
FordE1TZ-3B177A
MazdaZZL034470
MazdaZZLO-34-470

question_answer Customer Questions and Answers


Question:
What is the difference between the part number k8292 and k8620 I want to go with the better one that will last longer
Answer:
K8620 Is a problem solver kit and they are steel clad. You will need one only kit per vehicle K8292 Is the standard replacements. You will need two kits per vehicle.

Question:
Does this part number include one or two bushings?
Answer:
moog-k8620 will 2 axle pivot bushings in the box.

Question:
What material is the k8620 comprised of? The customer has a polymere preference would like to avoid rubber.
Answer:
Moog K8620 is Steel clad rubber at this time Moog does not have polyurethane or Thermoplastic available for this part.

Question:
How many bushings come in k8620?
Answer:
2 bushings come in moog-k8620.

Question:
Do you have install details available for your K8620 axle pivot bushings? I am wondering if the entire old metal sleeve has to come out, or if your bushing goes inside the old sleeve after removing the rubber like the energy suspension does.
Answer:
Unfortunately, As a dealer of Moog and other brands, we don't have access to the instructions for this part. I do apologize for this inconvenience. However, to answer your question all you have to do in replacing these is that you press out your old bushings with the inner and outer sleeves intact then you just press the new part K8620 part in your control arm. You do not have to burn out the rubber and reuse your original sleeves like Energy parts. The Moog rubber bushings they have their own outer sleeves. Moog made the parts this way to make it easy to install their parts. If you have any more question you can give us a call at 888-406-2330. ...see more

Question:
Is part number k8620 made from polyurethane?
Answer:
No, part number k8620 is made of rubber.