SPC 28810 Cam Bolt - ±0.3 Caster

  • spc-28810 Cam Bolt - ±0.3 Caster

Cam Bolt - ±0.3 Caster

Manufacturer: SPC
Part Number: spc-28810
Rating star_borderstar_borderstar_borderstar_borderstar_border | 1 Customer Questions
(?)
Accept Terms (5-8 weeks)
Price: $48.84
  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code “A” and “AA”, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code “B”, and only to the original consumer purchaser. Tools and equipment identified by price code “C” are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code “D” have no warranty stated or implied due to the inability to monitor the part’s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

FitmentCam Bolt - ±0.3 Caster spc-28810 fits these vehicles:
Details
  • Adjust camber or caster ±0.3 degree using the factory offset in the lower control arm bushings of many C & E Class platforms.
  • Place the grooved bolt in the forward arm's bushing to change caster or in the rearward arm's bushing to change camber.
  • If both camber and caster change are needed, you can use 2 kits.
  • SPC uses a hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.
Fitment for spc-28810
Overview
Grade10.9
Dimensions
Length120mm (4.72 in)
Studs, threads & splines
Thread Length37.4mm (1.47 in)
Materials, color & finish
MaterialSteel
ColorGray

question_answer Customer Questions and Answers

Question:
Is the spc-28810 a camber/caster bolt?
Answer:
yes, the spc-28810 is a camber/caster bolt. It allows negative or positive .3 degrees of camber or caster in the lower control arm bushings. The grooved bolt will go in the forward arm's bushing to change caster or in the rearward arm's bushing to ch hange the camber. If both the camber and caster changes are needed, you can use 2 kits. ...see more
add Ask a Question