Customer Reviews of SuperPro Brand Parts

Don't take our word for it. See what other customers are saying about SuperPro Suspension Brand Parts.

SuperPro Suspension Parts offer a lifetime warranty, but a lifetime warranty doesn't mean anything unless you're happy with the parts. We dont want you to take our word for it that they're excellent parts, just read the reviews below to see for yourself. Folks that have spent their hard earned cash on a part are going to let you know if a part lets them down. EVERY review we have for a SuperPro Suspension Part can be found below. If you're not convinced that SuperPro is the brand for you, we think these reviews might change your mind. When you've had enough convincing,start here to find the SuperPro Suspension Parts for your vehicle.

Reviews Breakdown - 193 Reviews

5 Star (186)
96%
4 Star (7)
4%
3 Star (1)
1%
2 Star (0)
0%
1 Star (0)
0%

Front Strut Mount with Bearing

starstarstarstarstar “Great quality”

Installed the new bushings while lowering my 2017 SS. Install went great. Driveability is fantastic. No harsh noises. Steering is great. \nNo issues recommending this product.

Aussie Dors - . - 5 out of 5

Universal Sway Bar Bushings - 29mm (1.14 in)

starstarstarstarstar “Very impressed”

The bushings are of great quality. Installed nice and easy making this project less burdensome. I had great customer service locating the actual bushing I needed as they didnt have a specific fit for my vehicle, but they were able to find one that fit perfectly. Highly recommend.

Seth BOWMAN - . - 5 out of 5

Front Upper Control Arm Bushing - Inner Position - Double Offset

starstarstarstarstar “Great!”

Just what I needed thank you.

Kale teixeira - . - 5 out of 5

Front Strut Mount with Bearing

starstarstarstarstar “WOW, Best Strut Mount Ive seen!!!”

I installed these Polyelast Strut Mounts on my 2005 GTO, and WOW, I was impressed!!!!!\nI am an experienced mechanic, who replaced the original strut mounts several years ago, in the GTO with the GM replacement mounts that failed and sagged almost immediately.\nThese Polyelast Strut Mounts with bearings are extremely well made, and are the best replacement mounts you can buy. Do not waste your money on the plain rubber mounts, these mounts do not sag like the rubber ones.\nThese mounts have made the GTO feel New again, what a great improvement for the front suspension!!!

Nicholas J Macchia - . - 5 out of 5

Front Strut Mount with Bearing

starstarstarstarstar “Review 2 Years Later”

Holding up well.

Dominick Viesta - . - 5 out of 5

Front Lower Control Arm Assembly

starstarstarstarstar “Review 1 Year Later”

Parts are great holding up amazing love them would highly recommend.

Will Texter - . - 5 out of 5

Front Lower Control Arm Assembly

starstarstarstarstar “Very good part, easy to install”

I think its a great part, feels 100% better having the caster arms and lower control arms installed. Easy install as well.

Drew Shelton - . - 5 out of 5

Front Sway Bar Bushing - 20mm (0.78 inch)

starstarstarstarstar “Review 1 Year Later”

The replacement performance bushing is ordered are still good as new today. The not only stiffened up my suspension, but they got rid of the horrible sway bar bushing squeak that is extremely common on the Audi TT MK1.

Dathan Mathews - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Position

starstarstarstarstar “Review 2 Years Later”

Ok, we use these on race cars (road course) and they hold position very well without binding the suspension.\nWe only damaged one in a 95mph wall impact.\nWe highly recommend these!\n1991 Ford Festiva B6T 200lb/ft wheel torque, 195 WHP

Ryal Greenwood - . - 5 out of 5

Front Sway Bar Bushing - 30mm (1.18 inch)

starstarstarstarstar “Perfect fit”

Overall review of this these bushings are top-line.

Roman Acuna - . - 5 out of 5

Front Steering Rack and Pinion Bushing

starstarstarstarstar “Great quality”

Once again good quality great fit car is running smoother than ever.

Roman Acuna - . - 5 out of 5

Front Lower Control Arm Bushings - Rear

starstarstarstarstar “Good quality bushings not cheap”

Good quality bushings, not cheap bushings very happy with this purchase top of the line.

Roman Acuna - . - 5 out of 5

Front Lower Control Arm Bushings - Front Position

starstarstarstarstar “Nice quality bushings perfect fit”

I order these bushings for my early model 1997 Lexus SC300 Perfect Fit quality ride.

Roman Acuna - . - 5 out of 5

Front Transmission Mount Bushings

starstarstarstarstar “Sweet”

Very sweet.

Gnanin Hettiarachchy - . - 5 out of 5

Front Sway Bar Endlinks - Heavy Duty - Adjustable

starstarstarstarstar “Perfect heavy duty end links”

The customer service was amazing in ordering my super pro endlinks and they worked perfectly. I was able to easily install them and replace my old worn endlinks. It got rid of my suspension noise and work perfectly on my lowered VW alltrack. I cant recommend this product more. Super heavy duty and amazing materials.

Braydon Walsh - . - 5 out of 5

Front Lower Control Arm Bushings - Front Position

starstarstarstarstar_border “Review 2 Years Later”

Worked as expected and is a very nice replacement for the stock rubber bushings. Given these can be in an environment where oil (transmission oil) or grease, water, and salt can be present, the polyurethane type bushing is an excellent long-lasting choice.

Travis B - . - 4 out of 5

Front Sway Bar To Lower Control Arm Kit

starstarstarstarstar “Review 1 Year Later”

All good.

Tim Greves - . - 5 out of 5

Front Lower Control Arm Bushings - Front Position

starstarstarstarstar “Review 1 Year Later”

Very satisfied. Heavy crush tube unlike some other bushings.

Bradley A Wing - . - 5 out of 5

Front Lower Control Arm Bushings - Rear

starstarstarstarstar “Review 1 Year Later”

Very satisfied. Had ordered other bushings that had a very light crush tube. Didnt use them and ordered the SuperPro bushings instead.

Bradley A Wing - . - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 75-85mm - 10mm Ball Joint End

starstarstarstarstar “excellent”

In case anyone is looking for a replacement rear sway bar end link for a 93/96 lexus GS300 this is the one to get TRC1025.

Charlie - . - 5 out of 5

Polyurethane Rod - 300mm X 50mm - Duro 80

starstarstarstarstar “Great product.”

Seemed to be what I needed, installed after machining, seems to be working just fine.

Wayne W Lee - . - 5 out of 5

Adjustable Rear Lower Control Arm Bushings - Inner Position - NOT FITTED FOR US OR CANADIAN MODELS

starstarstarstarstar “Review 1 Year Later”

You sold me the wrong part. It was not designed for US models, which was NOT specified on your website at the time. They were damaged during installation by a professional machinist. Ive emailed you about this and received no response. Not knowing they were the wrong part created an entire mess of a chain reaction, its shameful that you dont care as a company. Editors Note: We have taken care of the customer. The information we had on this kit was wrong and it has been corrected since his purchase. At this time SuperPro does not make bushings for the US Pathfinder but, they are working on it.

Steven Roberson - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Position

starstarstarstarstar “perfect”

installed it my self, very very easy to do, does take time, but the process is very smooth, otherwise the car feels great.

david maldonado - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Position

starstarstarstarstar “perfect”

installed it my self, very very easy to do, does take time, but the process is very smooth, otherwise the car feels great.

david maldonado - . - 5 out of 5

Front Sway Bar Bushing - 22mm (0.86 inches)

starstarstarstarstar “Well manufactured for the tough road use with an STI”

I would like to see them with a very small improvement on the stiffness.

Devere Tempro - . - 5 out of 5

Rear Panhard Rod To Chassis Mount Bushing

starstarstarstarstar “Review 2 Years Later”

Still working fine on 1981 Cressida.

Richard A Poulter - . - 5 out of 5

Rear Lower Control Arm Bushings - Inner Position

starstarstarstarstar “Review 1 Year Later”

Great kit.

John Cook - . - 5 out of 5

Front Lower Control Arm Bushing - Inner Position

starstarstarstarstar “Review 1 Year Later”

So far, so good. The parts seem to be very well made! I dont put a lot of miles on the car, but I have no doubt that they will continue to perform well for years to come.

John Granato - . - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

starstarstarstarstar “Review 2 Years Later”

The bushing are working great after two years. Steering control is still tight. Bushing are not showing signs of wear.

William Black - . - 5 out of 5

Front Strut Mount with Bearing

starstarstarstarstar “Great compromise between comfort and performance”

I have had these installed for almost a year and they are great. They are solid but not too harsh. One thing I will say is that they will raise the front of your car to be a bit higher than it was with the crushed mounts. This is likely the true stock height.

Jonn Abshire - . - 5 out of 5

Discontinued by SuperPro

starstarstarstarstar “good”

Those control arms fits perfectly and where easy to install on my 2016 vw golf. They almost completely solved my big wheel-hop problem and improved handling. The only down side is that the added caster moved the wheel forwards a bit and now my tire is rubbing against the bumper when i hit a big bump (i have a 1 3/4 drop) I would have loved the same part without the added caster better but i still think Ive made a good choice. Editors Note: When modifying the ride height from OEM can cause multiple issues that could effect tire clearance, steering and handling issues. All this must be taken into consideration.

Jean-Francois Piche - . - 5 out of 5

Front Motor Mount Bushings

starstarstarstarstar “Good quality part, fits and works well”

I bought these as the stock GM motor mounts for my 2013 Caprice PPV were similar in price and I am always looking for an upgrade from stock when I replace anything. Very satisfied with the product, these fit exactly the same way as the stock parts and were the same dimensions from what I could tell. I have had these mounts on the car now for ~1000 miles and they are very very close to stock as far as NVH. At idle you can feel a slight vibration in the steering wheel but it is very minor, probably unnoticeable for some people. Overall these are a good buy if you want increased durability and firmness but with a stock feel.

Josh Blackwell - . - 5 out of 5

Rear Sway Bar Bushings - 22mm (0.87 inch)

starstarstarstarstar “Great quality oem replacement for my Land Cruiser.”

Excellent quality and fitment. knurled inner sleeve to keep grease where it needs to be. Bought a set for the front sway bar as well.

Mason Stickler - . - 5 out of 5

Rear Sway Bar End Link Bushings

starstarstarstarstar “Very precise fitment and High quality”

These fit perfectly and matched the oem part. Just what I was looking for! Item came with a packet of lube that was more than enough to coat all surfaces. Very satisfied with these bushings.

Mason Stickler - . - 5 out of 5

Rear Lower Trailing Arm Bushings - Front Position

starstarstarstarstar “Review 1 Year Later”

Very good.

Gabriel cataford - . - 5 out of 5

Front Lower Control Arm Bushings - Front Position

starstarstarstarstar_border “Very high quality”

I sold performance Auto Parts for a decade and the quality of Polyurethane bushings can be spotty. Even among one manufacturer. These by far are the best I have seen. There are grease grooves in the outer portion and the inner holes are cross-hatched to hold grease. The sleeves fit perfectly. Tolerances were tight. I installed them along with all the rest of the poly bushings available for my 2001 Volvo S40 (Mitsu Lancer CE application) and they fit great. Nobody lists them for the Volvo, but they fit the early S40. I have only had a chance to install the fronts, but understeer has been reduced while keeping ride quality. The front end feels more planted. My only complaint is that they are a bit pricey. But thats what happens when you have an "orphan" car. Im just glad someone makes them.

Kevin Bednarsky - . - 4 out of 5

Rear Sway Bar Mount Bushing - 20mm (0.78 inch)

starstarstarstarstar “Very Satisfied”

I can feel my forester xt is more planted to the road. This is installed with the 20mm sway bar.

DALE O TORRES - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position

starstarstarstarstar “Review 2 Years Later”

Bought as a replacement for my stock worn out pushing to match with my coilovers, rigid collars and end links, worked exactly as described, the handling characteristics were night and day, such an improvement over even not worn out stock bushing, would definitely recommend if looking to take your project car to the next level.

Andrew Hughes - . - 5 out of 5

Front Strut Bar To Lower Control Arm Bushings

starstarstarstarstar “Very satisfied and customer service was top notch”

When I contacted you guys I was in a bind I had purchased the master kit from energy suspension and this part was not included, did not know what it was really called and where I could find it, but your customer service pointed me in the right direction and was very helpful.

Anastacio Mendez Jr. - . - 5 out of 5

SWAY BAR TO CHASSIS BUSH KIT

starstarstarstarstar “High quality part”

If your replacing your stock bushing this is the only way to go.

Barnaby arroyo - . - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 75-85mm - 10mm Ball Joint End

starstarstarstarstar “High quality part.”

Much needed parts if your modding your suspension and want to be safe on the road.

Barnaby arroyo - . - 5 out of 5

Universal Dust Boot

starstarstarstarstar_border “Well made part, good customer service. Fast shipping.”

The boots were well made, heavy duty and worked well in the application saving me hundreds of dollars by not having to order new balljoints. The OEM boots had disintegrated, but the ball joints remained tight and clean, so I was lucky enough to get the universal boot. Had to do a bit of trimming to enable the smaller diameter opening to fit due to the fact that the exact size I needed was not available. The trimming was easy and the boots fit very well.

Mark Conant - . - 4 out of 5

Front Differential Mount Bushings

starstarstarstarstar “Nice upgrade”

A little tough to get in, not sure if anyone has ever though of making them a 2 piece/split design. But once in they are a nice fit and should last much longer than the stock rubber. These were used on a daily driven stock grand cherokee... driver is an on and off the gas kinda driver.

SETH KEARCHNER - . - 5 out of 5

Rear Trailing Arm Bushings - Front Position

starstarstarstarstar “Awesome”

Installation was easy and alignment was perfect.

Mike May - . - 5 out of 5

Front Steering Rack and Pinion Bushing

starstarstarstarstar “Good products”

High-quality products and very satisfied.

Wasim Khan - . - 5 out of 5

Rear Subframe Mount Bushings

starstarstarstarstar “Review 1 Year Later”

Great value and quality and design. Thanks!

Paul Hieb - . - 5 out of 5

Front Steering Rack and Pinion Bushings

starstarstarstarstar “Very good item fits perfectly on a 1999 toyota Altezza”

It was very easy to install them, you will only struggle to take the oem from the rack. Now the steering fells firm and precise. I really recommend them. I fitted them on a 1999 toyota altezza

Frank Salvador Cumaio - . - 5 out of 5

Front Sway Bar Bushing - 34mm (1.33 inch)

starstarstarstarstar “Review 2 Years Later”

Its like I purchased it yesterday.

David Wiggan - . - 5 out of 5

Steering Rack Bushings - 30mm Bracket - Passenger Side

starstarstarstarstar “Excellent product. Perfect fit and reasonably priced.”

I received these bushings in three days. Super fast. I was very pleased with the bushings and the fit was perfect. The price was the best on the internet, and I will be using the company in the future. I highly recommend this product and company for your suspension needs.

Paul Moffler - . - 5 out of 5

Front Strut Arm Bushings

starstarstarstarstar “Review 2 Years Later”

Holding up without any concerns after 2 years of service.

the Great Potential Auto Center - . - 5 out of 5

Front Lower Differential Bushings

starstarstarstarstar “Great product!!”

Perfect fit and finish. Pressed old worn out bushing out and this one pressed right in for a perfect fit.

Josh Vaughan - . - 5 out of 5

Rear Trailing Arm Upper Bushing

starstarstarstarstar “Review 2 Years Later”

Good day.\nI have been using SuperPro bushings since 2009, the thrust bush has served for 5 years, the rear cushion thrust bushings are 10 years and serve to date. They showed excellent results during off-road operation and in the harsh Russian winter from November to March at temperatures as low as -31 F. Suspension with SuperPro bushings assembled and elastic. Payback for durability, slight wear of the metal at the points of contact with SuperPro bushings after long-term operation. For off-road use, I will choose SuperPro bushings.

Alexander Baryshev - . - 5 out of 5

Rear Toe Control Arm Bushings

starstarstarstarstar “Review 1 Year Later”

These parts are great no noise and still holding strong.

Daniel Rodriguez - . - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

starstarstarstarstar “Review 1 Year Later”

Replaced 1 year ago and so far so good. Alot better than stock rubber for sure!!!

Jeremy Coffey - . - 5 out of 5

Front Strut Arm Bushings

starstarstarstarstar “amazing”

Great product. Easy install. Super fast shipping! I will continue to buy from here if I need more bushings.

Kevin - . - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

starstarstarstarstar “These are a good product. Material and fit was good as expected.”

The new bushings resolved the loose play in the steering rack due to the original 10-year-old parts being worn out.

ROBERT JACKSON - . - 5 out of 5

Front Steering Rack and Pinion Bushings

starstarstarstarstar “Review 1 Year Later”

These bushings are fantastic. Very easy to install & changed the handling characteristics of my Land Cruiser dramatically.

John Devore - . - 5 out of 5

Front Sway Bar Bushings - 24mm

starstarstarstarstar “Great product”

Great mod for my 16 wrx on the front stock sway bar, you can feel the difference.

Donald moser - . - 5 out of 5

Rear Lower Trailing Arm Bushing

starstarstarstarstar “great product”

Good firm material, easy to install, control of the road is great.

Russell Bass - . - 5 out of 5

Rear Sway Bar Bushing - 22mm (0.87 Inch)

starstarstarstarstar “Very Good”

Bushings are better than Eibach black ones. Good quality. 2008 wrx 22mm rear sway bar.

Bradford Dempsey - . - 5 out of 5

Front Sway Bar Bushings - 25mm (0.98 inch)

starstarstarstarstar “Very Good”

25 mm bushing Eibach bar 2008 wrx. Bushing seems better than Eibach ones.

Bradford Dempsey - . - 5 out of 5

Front Sway Bar Bushing - 24mm (0.94 inches)

starstarstarstarstar “Very Good”

2008 wrx bushing for Eibach Bar kit. Worked Great 24mm front sway bar.

Bradford Dempsey - . - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 125-145mm - 10mm Ball Joint End

starstarstarstarstar “Excellent product. Easy to install and performs flaulessly.”

10 out of 10. Would highly recommend. Have them installed on both my sons cars.

Bryant Williams - . - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 245-305mm - 10mm Ball Joint End

starstarstarstarstar “Excellent product. Easy to install and performs flaulessly.”

10 out of 10.

Bryant Williams - . - 5 out of 5

Roll Center Adjusting Kit

starstarstarstarstar “Excellent product.”

Great quality easy installation. a dramatic change in steering response and feel over stock.

3rd Gear Auto - . - 5 out of 5

Front Sway Bar Bushing - 26mm (1.02 inch)

starstarstarstarstar “Great product”

I had a clunking noise coming from the front and these solved it. I didnt want to go back with OEM rubber. They have been installed for a couple months now and still doing great.

Earl Hopper Jr - . - 5 out of 5

Front Steering Rack and Pinion Bushing

starstarstarstarstar “Great experience”

Great fit! Easy install! Quick delivery!

BRADLEY ALBERT - . - 5 out of 5

Front Lower Control Arm Bushing - Rear Position

starstarstarstarstar “Review 1 Year Later”

They are still working fine, thanks

Israel Marmolejos - . - 5 out of 5

Front Engine Mount Rear Void Filler

starstarstarstarstar “Review 2 Years Later”

Holding up great, with little vibration. Clutch engagement is much smoother now. Highly recommended upgrade.

chopper - . - 5 out of 5

Front Strut Arm Bushings - At Chassis

starstarstarstarstar “Review 2 Years Later”

Parts have held up very well under the stress of ALOT of driving. I have put about 50,000 miles on these and they are still good! Dont even squeak like topical poly bushings.

colin chambers - . - 5 out of 5

Front Lower Control Arm Assembly

starstarstarstarstar “Quality pieces that look great and provide better performance and reliability over the OEM replacements.”

Super easy to install. Customer service regarding all Superpro parts I have purchased has been 2nd to none. Thank you again for the support and quick shipping!

Wesley Bracken - . - 5 out of 5

Rear Upper Control Arm Bushings - Inner Position

starstarstarstarstar “Review 2 Years Later”

Still holding up,,no rusty,good shape.

Shui Mo - . - 5 out of 5

Rear Trailing Arm Bushings - Front Position

starstarstarstarstar “Review 2 Years Later”

Still holding up,no rusty,good shape.

Shui Mo - . - 5 out of 5

Rear Trailing Arm Bushings - Rear Position

starstarstarstarstar “Review 2 Years Later”

Still holding up,,no rusty,very good shape.

Shui Mo - . - 5 out of 5

Rear Sway Bar Endlinks - Heavy Duty

starstarstarstarstar “Impressed”

I was in the market for new rear endlinks and decided to give SuperPro a try. Im extremely happy that I did and will look to them for parts in the future based upon my experience thus far. \n\nThe product: Im very impressed with the quality of these endlinks...the bushings look great, the welds are smooth and neat and the rubber dust boots are at least 3x as thick as the aftermarket endlinks I am replacing ... simply put - this product looks and feels built to last. \n\nThe customer service : one of the best Ive experienced from an after market parts company - if not the best - hands down. A huge thank you to Brett Hauschild - member of the sales and tech support team. Having had a bad experience with my previously installed links (different major brand manufacturer , broke in 5,000 miles) I was pretty guarded and had questions about this product. He responded politely and informatively , bullet point by bullet point answering each question I had thoroughly and in detail. It was a real education - I was so impressed I forwarded the email to my friends to share the information provided. \n\nIt has been about 1,000 miles and all I have is satisfaction with the endlinks. Theyre quiet and perform great. Steering feel is back to tight and precise now that these are coupled with my 25mm aftermarket swaybar on my mk7 gti. The worry is gone and these links disappear into the background as I really enjoy my car now - just as things should be. \n\nI recommend this product without hesitation.

Mike - . - 5 out of 5

Rear 22mm Heavy Duty 3 Point Adjustable Sway Bar

starstarstarstarstar “A+”

Deciding between this and the Whiteline I decided on Superpro. Fit was perfect for my 1999 2.5rs. Recently bought this car as my project and consider it my forever car. I had read that the finish on the Superpro swaybar was superior and I have to say that is indeed true based on my prior experience with Whiteline. I have no doubt this will last the life of the car. Shipping estimate was a little off but overall Im happy.

Tyler - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Front Position

starstarstarstarstar “Review 1 Year Later”

You get what you pay for. Quality is not cheap

Justin Hagan Senter - . - 5 out of 5

Polyurethane Rod - 300mm X 50mm - Duro 80

starstarstarstarstar “Great product.”

Seemed to be what I needed, installed after machining, seems to be working just fine.

Wayne W Lee - . - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 245-305mm - 10mm Ball Joint End

starstarstarstarstar “Very impressed”

This universal part is amazing,

eddie bruce - . - 5 out of 5

Front Upper Control Arm Bushing - Inner Position

starstarstarstarstar “perfect”

installed it my self, very very easy to do, does take time, but the process is very smooth, other wise the car feels great

david maldonado - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Position

starstarstarstarstar “perfect”

installed it my self, very very easy to do, does take time, but the process is very smooth, otherwise the car feels great.

david maldonado - . - 5 out of 5

Front Lower Control Arm Bushings - Front and Rear Positions

starstarstarstarstar “Review 1 Year Later”

The Bushings are working great. No Squeaks!! Some people warned about squeaks with poly bushings but due to the internal knurl to hold the grease, No Squeaks. Also the front suspension feels tighter than the OEM rubber ones. I highly recommend SuperPro Bushings

Bruce Caswell - . - 5 out of 5

Front Rack and Pinion Mount Bushing

starstarstarstarstar “Review 1 Year Later”

Still working great! Thanks for asking.

Winnie Gilbert - . - 5 out of 5

Rear Sway Bar Bushing - 18mm (0.70 inches)

starstarstarstarstar “Very satisfied!”

I needed to replace my stock sway bar bushings and wanted to upgrade from the factory rubber units. These fit perfectly and have completely eliminated the squeaking units that were on this used vehicle when I bought it... I also replaced the front end sway bar bushings with the same brand, and I am 110% satisfied with both sets!.... highly recommended. ...

Aaron T Stout - . - 5 out of 5

Rear Trailing Arm Bushings - Front Position

starstarstarstarstar “Excellent product”

installation is easy and performance of the bushings is outstanding also NVH is still at a comfortable low

3rd Gear Auto - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position

starstarstarstarstar “Review 1 Year Later”

Going strong

Linda Cervantes - . - 5 out of 5

Rear Lower Control Arm Bushings - Inner Position

starstarstarstarstar “Review 1 Year Later”

Great kit.

John Cook - . - 5 out of 5

Front Sway Bar EndLink Bushings

starstarstarstarstar “Review 2 Years Later”

All is fine. Excellent.

Pavlos Franceskides - . - 5 out of 5

Discontinued by SuperPro

starstarstarstarstar “good”

Those control arms fits perfectly and where easy to install on my 2016 vw golf. They almost completely solved my big wheel-hop problem and improved handling. The only down side is that the added caster moved the wheel forwards a bit and now my tire is rubbing against the bumper when i hit a big bump (i have a 1 3/4 drop) I would have loved the same part without the added caster better but i still think Ive made a good choice. Editors Note: When modifying the ride height from OEM can cause multiple issues that could effect tire clearance, steering and handling issues. All this must be taken into consideration.

Jean-Francois Piche - . - 5 out of 5

Front Strut Arm Bushings

starstarstarstarstar “Excellent quality, easy to install.”

HUGE upgrade from Stock bushings on my 2nd Gen Lexus GS 300. Night and Day difference, truly.

Eric McCann - . - 5 out of 5

Front Steering - Rack and Pinion Mount Bushings - Power Steering

starstarstarstarstar “Review 2 Years Later”

Still working.

Kelvin Collymore - . - 5 out of 5

Front Lower Control Arm Bushing - Inner Position

starstarstarstarstar “Review 1 Year Later”

So far, so good. The parts seem to be very well made! I dont put a lot of miles on the car, but I have no doubt that they will continue to perform well for years to come.

John Granato - . - 5 out of 5

Front Sway Bar Bushing - 27mm (1.06 Inch)

starstarstarstarstar “Review 1 Year Later”

Still feels like new! Thank you for a great product.

Craig Bull - . - 5 out of 5

Front Strut Bar Bushings - To Chassis

starstarstarstarstar “Great product, good fit, good road feel”

Tightened up the front end nicely. Major PAIN to install (having to lower the front engine cradle), but once all said and done the front end feels much more stable.

Donald Lightfoot - . - 5 out of 5

Rear Lower Control Arm Bushings - Rear Arm - Inner Position

starstarstarstarstar “Worked well”

Relatively easy to install. We have a hydraulic press onsite which makes the installation easier. Overall very happy with the product.

Allan Dale Anderson - . - 5 out of 5

Steering Rack and Pinion Mount Bushing - Passenger Side

starstarstarstarstar “Very good product.”

This took all the play out of my steering rack. Gave me a much better steering feel, as well as corering confidence. I would recommend this to every GTO owner. An the install is so simple.

Edward Robert Buckley - . - 5 out of 5

Rear Spring Insulator - Upper Position

starstarstarstarstar “Very good product.”

Helps settle the rear spring between the axle, keeps spring rate high for lowering springs, an keeps your ride comfort. Very impressed with these products.

Edward Robert Buckley - . - 5 out of 5

Front Coil Spring Isolator

starstarstarstarstar “Very good product.”

These sping spacers work really well for drop springs, or lowering springs. Helps increase the spring rate, an keeps the same comfort level. Overall amazing product.

Edward Robert Buckley - . - 5 out of 5

Front Coil Spring Spacer Bushing

starstarstarstarstar “Very good product.”

Give you better strength than stock parts, but the same comfort level.

Edward Robert Buckley - . - 5 out of 5

Front Motor Mount Bushings

starstarstarstarstar “Great fit, great price, fast shipping! Plus a Lifetime Warranty”

I had researched extensively after my factory hydraulic mounts failed. These mounts were the same price as the factory replacements. I was slightly concerned about increased vibration, but the NVH is very similar to the factory mounts.. The added bonus of the lifetime warranty is icing on the cake, even though I dont think I will ever have to use it since they are quality parts!

Chris Etemadi - . - 5 out of 5

Rear Shock Absorber Bushings - Lower

starstarstarstarstar “Very impressed with the quality of these bushings!”

Have not installed them yet but they seem to be of great quality! Shipping was fast as well. Great customer service. Will update once I have them installed.

Audeen Sundar - . - 5 out of 5

Rear Lower Trailing Arm Bushings

starstarstarstarstar “Amazing!”

Have not installed them yet but they seem to be of great quality! Shipping was fast as well. Great customer service. Love the turbo design. Will update once I have them installed.

Audeen Sundar - . - 5 out of 5

Rear Lower Control Arm Bushings

starstarstarstarstar “Very impressed with the quality of these bushing!”

Have not installed them yet but they seem to be of great quality! Shipping was fast as well. Great customer service.

Audeen Sundar - . - 5 out of 5

Front Sway Bar Bushings - 20mm (0.78 inch)

starstarstarstarstar “Review 1 Year Later”

These are great urethane bushings, I have had zero issues with Super-Pro products, these are very durable I wish I could include pictures of my setup here, but from what I have seen so far they handle everything quite well after a little over a year of use , I would recommend these for track/tuner cars, they might not be for people that like extremely smooth ride quality, but honestly speaking, they are not that bad on a daily driver, just make sure you use all the grease/lube they include with the bushings they sell, all things considered I like Super-Pro and would use their products on my cars again and again, keep up the good work Super-Pro.

evokings - . - 5 out of 5

Rear Panhard Rod Bushings

starstarstarstarstar “Easy to install, great fit!”

These pan hard bushings were super simple to install after I pressed the old ones out. Once realized that the old bushing sleeve had to be removed that is.. but these bushings are fantastic quality! I had zero issues installing the pan hard bar back into my vehicle. Bolt holes lined right up. I would highly recommend!

Damon Carlisle - . - 5 out of 5

Rear Blade Control Arm Bushing - Forward Position

starstarstarstarstar “Review 1 Year Later”

They took a few hours to install each side. Both my stock bushing had completely failed from the blade so minimal work was needed prepping the blade for the bushing. Used a manual arbor press to put the new bushings in, which definitely took some\nMuscle. Feel is stiff which is nice. Not worried about failure anymore.

Matthew crane - . - 5 out of 5

Front Lower Control Arm Bushings - Rear

starstarstarstarstar “Great, loved them.”

The hardest part of installing these bushings was pressing out the old factory bushings. \nIf you dont have the proper tools, i would recommend buying the pre assembled one. \nReally easy install, was able to do it without removing the wheels. There are a couple of how-tos on youtube that really help.\nPerformance wise i wasnt dissapointed. It is a bit pricey but i would totally buy them again and again because they make that big of a difference in steering and handling. \nExtremely linear braking and steering response. With a nice set of coilovers or stiffer springs the car would be perfect.

Ryan Dang - . - 5 out of 5

Front Sway Bar Endlinks

starstarstarstarstar “Best Front Sway Bar Link Kit!!!”

This Front Sway Bar Link Kit is simply the best replacement you can get for the GTO.\nHeavier Duty over the stock ones, also gives you the choice with rubber bushings, or the Poly ones.\nNo other Kit gives you both Front Sway Bar Endlinks, with the choice of Bushings, GREAT BUY!!!!

Nicholas J Macchia - . - 5 out of 5

Front Coil Spring Isolator

starstarstarstarstar “Perfect Front Coil Spring Isolator”

I replaced my OEM plain rubber Coil Spring Isolators on My 2005 GTO, \nThis Isolator keeps it shape and makes the Front end of your vehicle sit nicely, without sagging.\nI used this Isolator, with the SPF1590AK Srut Mount.\nI am glad that these parts are available!!!\nThese parts made HUGE, Fantastic difference then the stock parts that do not hold up.\n

Nicholas J Macchia - . - 5 out of 5

Front Strut Mount with Bearing

starstarstarstarstar “WOW, Best Strut Mount Ive seen!!!”

I installed these Polyelast Strut Mounts on my 2005 GTO, and WOW, I was impressed!!!!!\nI am an experienced mechanic, who replaced the original strut mounts several years ago, in the GTO with the GM replacement mounts that failed and sagged almost immediately.\nThese Polyelast Strut Mounts with bearings are extremely well made, and are the best replacement mounts you can buy. Do not waste your money on the plain rubber mounts, these mounts do not sag like the rubber ones.\nThese mounts have made the GTO feel New again, what a great improvement for the front suspension!!!

Nicholas J Macchia - . - 5 out of 5

Front Steering Rack and Pinion Bushings

starstarstarstarstar “Great”

Installed within an hour. Easy install on 99 Land Cruiser.

Jessica l zopf - . - 5 out of 5

Front Sway Bar Bushings - 26mm (1.02 inches)

starstarstarstarstar “Great”

Part was just as advertised.

Mark Davis - . - 5 out of 5

Front Steering Rack and Pinion Bushings

starstarstarstarstar “Great product”

Replaced the shot OEM bushings with these. Tightened the steering back up to "new" feel.

J. W. - . - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

starstarstarstarstar “Complete kit, hard material”

Great product, fits and works perfect no more steering wheel play.

Rodolfo Rodriguez - . - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 140-185mm - 12mm Ball Joint End

starstarstarstarstar “Excellent product”

I actually used these links on my 2002 Jeep Wrangler for the front sway bar. The item is holding up really great ,nice product everyone.

Carl Moore - . - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

starstarstarstarstar “Review 1 Year Later”

Replaced 1 year ago and so far so good. Alot better than stock rubber for sure!!!

Jeremy Coffey - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position

starstarstarstarstar “Review 2 Years Later”

The Duro 3441K are holding up well. I have had no problems with them.

Francis Miller - . - 5 out of 5

Front Sway Bar Bushings - 14mm (0.55 inch)

starstarstarstarstar “Review 2 Years Later”

Excellent product.

John E Grassanovits - . - 5 out of 5

Front Lower Control Arm Bushings - Front Inner Position

starstarstarstarstar “Awesome.”

These are very well made bushings. I used a 20-ton press with a 1" 3/16 socket to press out the old bushings, and the install is a breeze as you just lube up the bushings inside and out and stick the sleeve though them. On my stock, LCAs they fit very well with precision. The inner sleeve did take a lot of pressure to stick through the bushings! The overall impression is this is top quality materials and workmanship.

Robert Baker - . - 5 out of 5

Front Lower Control Arm Bushings - Rear Inner Position

starstarstarstarstar “Awesome.”

Allow me to be the first to review this fine product. This is the pinnacle of high-performance replacement bushings for the Nissan Maxima. The install went as expected by destroying the old bushing to reveal a cross-shaped sleeve. I removed the sleeve with a saws-all metal blade. I used a 1" 7/8 socket to press out the old bushings, and press in the new SuperPro SPF4151k bushings into the aluminum housing. Use the lube on the inside of the bushing as required: Good To Go. I used a 20-ton press for the bushings.

Robert Baker - . - 5 out of 5

Front Lower Control Arm Bushings - Front Inner Position

starstarstarstarstar “Awesome.”

These are very well made bushings. I used a 20-ton press with a 1" 3/16 socket to press out the old bushings, and the install is a breeze as you just lube up the bushings inside and out and stick the sleeve though them. On my stock, LCAs they fit very well with precision. The inner sleeve did take a lot of pressure to stick through the bushings! The overall impression is this is top quality materials and workmanship.

Robert Baker - . - 5 out of 5

Front Lower Control Arm Bushings - Rear Inner Position

starstarstarstarstar “Awesome.”

Allow me to be the first to review this fine product. This is the pinnacle of high-performance replacement bushings for the Nissan Maxima. The install went as expected by destroying the old bushing to reveal a cross-shaped sleeve. I removed the sleeve with a saws-all metal blade. I used a 1" 7/8 socket to press out the old bushings, and press in the new SuperPro SPF4151k bushings into the aluminum housing. Use the lube on the inside of the bushing as required: Good To Go. I used a 20-ton press for the bushings.

Robert Baker - . - 5 out of 5

Rear Differential Bushings - to Crossmember

starstarstarstarstar “Quality Bushing Replacement”

My original bushings were not quite worn out yet so I did not see a lot of difference when I changed to the SuperPros, but as a replacement for the originals I have a sense these will retain their pliability and function well beyond the originals.

David Hume - . - 5 out of 5

Rear Beam Axle Pivot Bushing Kit

starstarstarstarstar “Awesome.”

I purchased these for my 2001 Nissan Maxima SE. I pressed them in on a rickety 3-ton press using a 3" hub socket with no problems. I didnt get either bushing perfectly centered, but the design allows for that. You center the bushing up with the ridge that runs down the length of the pivot arm. When installed correctly it looks offset, but the old one looked that way too. You will see what I mean when you look at it up close. Remember that try and evenly apply the lube to all the surfaces including in-between the two external bushings that press onto the metal sleeve because they rub together during normal operation. I was nervous about buying these because they looked funny but after talking to the SuperPro representative I realized they had a superior design. I hope this helps all those who are considering purchasing this fine product.

Robert Baker - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Front Position

starstarstarstarstar “High quality parts”

Put these in myself , just put the 2 poly pieces in then lubed the metal tube with the clear poly lube and took a long bolt with large washer and put through metal piece then ran that in through the poly pieces put another large washer and nut on that end then got the metal piece partialy started then used my electric impact to screw the metal piece in . Very easy!

Darin Ballard - . - 5 out of 5

Front Steering Rack and Pinion Bushing

starstarstarstarstar_border “good”

The inside diameter was a 3/16th too small but it works and satisfied.\n

Kaionalani Luning - . - 4 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

starstarstarstarstar “Amazing”

These bushings fixed the massive issue I was having with the H3 rack. Now it drives and handles like new. Huge difference between the oem and these bad boys.

Shawn Mahoney - . - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

starstarstarstarstar “very good quality.”

the only issue was the lip on the big bushings was backwards.Only goes one way. Had to grind them off on the bench grinder.Very good product! Editors Note: This kit is for the Right Hand drive only. That may be the reason why the lip had to be removed.

Michael Watson - . - 5 out of 5

Steering Rack Bushings - 30mm Bracket - Passenger Side

starstarstarstarstar “Nice quality. fair price”

Parts fit as well as the old stock ones. Good price. Very happy.

Crystal jenkins - . - 5 out of 5

Front Rack and Pinion Mount Bushing

starstarstarstarstar “Very good!”

Very good fitment and fast delivery!

Simen Olsen - . - 5 out of 5

Front Lower Control Arm Bushings - Rear Position - Double Offset

starstarstarstarstar “So far, so good”

I bought these because there currently a spherical bearing option on the market. Install is straightforward, and they fit well. Neat design allows for articulation- not usually a feature found with urethane, and the only reason Im using these! No noise so far (installed 1200 miles and 2 track days ago), so well see how they hold up!

Anthony D Walls - . - 5 out of 5

Front Transmission Mount Bushings

starstarstarstarstar “Very Nice”

Super impressed with the fit and finish on these. Very nice!

Danny Smith - . - 5 out of 5

Front Rack and Pinion Mount Bushing

starstarstarstarstar “Very well made!!! Instaling them today as a matter of fact!”

Dont have anything bad to say about them. They are great!!!!

Manuel Perez - . - 5 out of 5

Rear Sway Bar Endlinks - Heavy Duty

starstarstarstarstar “Excellent especially if it snows where you live.”

This part fit my 2016 VW golf R. I had purchased an aftermarket sway bar and it quickly destroyed the factory end links. These fit up well. Its important to note that unlike the competition that uses spherical end links which wear and require extensive maintanence in winter these are safer to run.

Tyler von Eggers - . - 5 out of 5

Front Sway Bar Endlinks

starstarstarstarstar “Review 1 Year Later”

Working like a champ, no bends or squeaks!

Kerry Williams - . - 5 out of 5

Front Lower Control Arm Bushings - Rear

starstarstarstarstar “Bushings were Very High Quality.”

Bushings were the Best quality I could find for the price. Installed easily with precision and No Slop what so ever. Lower Control arms Installed on vehicle with the perfect amount of tension. vehicle handles and drives very nice after installing these bushings.

Jeremiah Nettifee - . - 5 out of 5

Front Lower Control Arm Bushings - Front Position

starstarstarstarstar “Bushings were Very High Quality.”

Bushings were the Best quality I could find for the price. Installed easily with precision and No Slop what so ever. Lower Control arms Installed on vehicle with the perfect amount of tension. vehicle handles and drives very nice after installing these bushings.

Jeremiah Nettifee - . - 5 out of 5

Front Sway Bar Bushing - 22mm (0.86 inches)

starstarstarstarstar_border “Well manufactured for the tough road use with an STI”

I would like to see them with a very small improvement on the stiffness.

Devere Tempro - . - 4 out of 5

Polyurethane Rod - 300mm X 50mm - Duro 80

starstarstarstarstar “Good”

Got this to make a bushing for my car, it was just as advertised.

Daniel Serrato - . - 5 out of 5

Front Lower Control Arm Bushings - Front Inner Position

starstarstarstarstar_border “Decent quality.”

Overall good fit. Would like to see some grease channels molded to inside of bushings. These parts fixed the torque steer and improved the responsiveness of the suspension. A lot of work to replace but it is worth it.

Jim Bryson - . - 4 out of 5

Front Steering Rack and Pinion Bushing

starstarstarstarstar “Great”

Could not find these parts locally. Glad I came across this website. Parts came fast and were perfect fit.\nWill be ordering more in the future from them.

Nathan ramroop - . - 5 out of 5

Front Panhard Rod Bushing

starstarstarstarstar “EXCELLENT”

I had actually purchased the entire panhard bar with the new bushings because I was not able to find just the bushings. It was costing me $400.00+. Until I found out Suspension.com. I was able to change the bushing on the panhard bar for only $42.00. Besides the savings I was really impressed by their exceptional service and professionalism. To begin with I was recommended to them by 4wheel parts of houston. A company that is a subject matter expert when it comes to 4x4 vehicles. Needless to say, Suspension.com will be our first stop when we are looking for auto parts.

ASHEESH KRISHAN - . - 5 out of 5

Rear Lower Control Arm Bushings - Rear Arm - Inner Position

starstarstarstarstar “Worked well”

Relatively easy to install. We have a hydraulic press onsite which makes the installation easier. Overall very happy with the product.

Allan Dale Anderson - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position - Anti Lift

starstarstarstarstar “Review 1 Year Later”

I installed these on my 2006 Subaru Legacy GT and they are working great. I did lots of suspension mods at the same time so its hard to pinpoint exactly what affect theyve had, but Im sure theyve helped somehow. In order to fit these on my Legacy GT I had to purchase (QTY2) Subaru PN: 901370010. This is a longer stud for the front control arm, inner rear mount/bushing location, which allows the use of these bushings on vehicles, such as mine, that came equipped with a shorter version of the stud. I believe the shorter stud on my vehicle was the only reason that these are not listed as fitting the 05-09 Subaru Legacy GT (and probably some other Subarus which came with that shorter stud).

Elgin Owens - . - 5 out of 5

Front Strut Bar Bushings - To Chassis

starstarstarstarstar “Great product, good fit, good road feel”

Tightened up the front end nicely. Major PAIN to install (having to lower the front engine cradle), but once all said and done the front end feels much more stable.

Donald Lightfoot - . - 5 out of 5

Front Steering Rack and Pinion Bushing

starstarstarstarstar “Extremely good quality product”

The product is of a very good quality, am very much pleased with it.

Bobby Mannan - . - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

starstarstarstarstar “Complete kit, hard material”

Great product, fits and works perfect no more steering wheel play.

Rodolfo Rodriguez - . - 5 out of 5

Universal Dust Boot

starstarstarstarstar “Look great!”

These look great, wish they were offered in more colors.

Carlos Corona - . - 5 out of 5

Rear Differential Pinion Mount Bushing

starstarstarstarstar “Very good”

Right part the first time and quick delivery!

Jason neil Whitney - . - 5 out of 5

Front Sway Bar Bushings - 26mm (1.02 inches)

starstarstarstarstar “Great”

Part was just as advertised.

Mark Davis - . - 5 out of 5

Front Strut Mount with Bearing

starstarstarstarstar “On a scale of 1-10 I give them a 10”

I highly suggest purchasing these strut mounts. They are a high quality and the ride quality is much better than my poly mounts. Theyre the best of both worlds stronger than oem and softer than poly. When riding over bumps I do not hear or feel impact. I needed these fairly quickly the customer service during my purchase was excellent. I will be ordering from this company for their great products but most importantly the customer service. Editors Notes: SuperPro bushings are poly urethane. They are formulated differently than other poly manufacturers. SuperPro bushings are softer, but are just as durable.

Ulisses Maria - . - 5 out of 5

Front Steering Rack and Pinion Mount Bushings - Power Steering

starstarstarstarstar “High Quality Part”

Part is made from good quality material and replacement fit is perfect.

Chris - . - 5 out of 5

Motor Support Bushing

starstarstarstarstar “quality and fit is top notch..”

the bushings where machined perfect, installation is quick and simple using a standard bench vise and small sections of 2x4 wood. Engine response greatly improved, smoother acceleration from lights, shifts better with less "lurching" of the drive-train. Downside? slightly more engine noise and fractionally higher levels of vibration at idle in drive, but not substantial by any standard.

fadi faisal - . - 5 out of 5

Rear Panhard Rod Bushing

starstarstarstarstar “According to all the research Ive done online, Super Pro is the way to go for polyurethane bushings.”

I installed these on my 92 Volvo 240 without any trouble. A big shop vice and/or shop press is a must but its not hard at all. After many online hours researching bushings, Im happy with these, but only time will tell. Super Pro are supposed to be the best.

Chris Tessmer - . - 5 out of 5

Front Strut Arm To Lower Control Arm Bushing

starstarstarstarstar “Review 1 Year Later”

Perfect fit, excellent construction of the bushings. My mechanic had told me years ago these needed to be replaced, was happy to find a better than OEM part to install, because I really do not want to tackle this job again, and I wont have to!!!

John Grassanovits - . - 5 out of 5

Front Strut Arm To Chassis Mount Bushing

starstarstarstarstar “Review 1 Year Later”

Excellent fit, and best of all, will never have to replace these bushings again!!!

John Grassanovits - . - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 245-305mm - 10mm Ball Joint End

starstarstarstarstar “Great quality parts”

These make the oems look puny. Only wish the boots were fitted a little more snuggly. Looks like a couple were cut too short and could come off and get dirt in the joint over time. Will have to keep an eye on them. I recommend some electrical tape over the adjustment points to not beat them up when adjusting them on car.

Adam Bowling - . - 5 out of 5

Front Strut Arm Bushings

starstarstarstarstar “Great!”

These are a great improvement over the standard rubber bushings, plus they will probably last forever.\nCar feels and drives better than new!

James Wancha - . - 5 out of 5

Rear Upper Control Arm Bushing - Rear position

starstarstarstarstar “First thought when I got them was beefy”

I ordered these to replace the stock bushings on the Iron Rock Offroad rear upper control arm. I have this arm on a Jeep Liberty with a custom bracket. These bushings fit perfect, and I really wish they would have come in the arm from the beginning. They make the arm a bit stiffer and thats good. I have already given the part number to a friend who uses the same arm. I have also let a friend who is building our brackets know about these as well. Should be getting some more orders from us KJ guys.

Jack Everette - . - 5 out of 5

Motor Mount Bushings - Upper Position

starstarstarstar_borderstar_border “Very Stiff”

Once installed, the cab vibrates a whole lot. As the other reviewer mentioned, this full performance at the expense of comfort. Good alternative for anyone looking to replace the whole stock upper mount with an expensive poly version. Perhaps a softer version would be useful for the rest of us that want a middle ground. Editors Note: Motor mount inserts fill voids in the OEM engine mounts. The OEM mounts have the voids in them to absorb the vibration. These inserts fill the voids and yes, you will feel the engine vibrate. The benefits is the engine will not move as before and eliminate wheel hop.

Chris - . - 3 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

starstarstarstarstar “good quality”

The directions were good and steering seems to be easier.

Paul Greer - . - 5 out of 5

Front Motor Mount Bushings

starstarstarstarstar “Amazing”

My old mounts are broken .. Installed Superpro .. good quality and lifetime warranty.

Z - . - 5 out of 5

Front Sway Bar To Chassis Mount Bushings - 25mm (0.98 inch)

starstarstarstarstar “Great part”

Part fit great and was made very well. I have gone through 3 sets of OEM Subaru bushings this should be my last set now that I have found these bushings. Car is nice and quiet now over bumps thanks for a great part.

Todd duguay - . - 5 out of 5

Rear Lower Control Arm Bushings - Rear Arm - Inner Position

starstarstarstarstar “Worked well”

Relatively easy to install. We have a hydraulic press onsite which makes the installation easier. Overall very happy with the product.

Allan Dale Anderson - . - 5 out of 5

Front Strut Bar Bushings - To Chassis

starstarstarstarstar “Great product, good fit, good road feel”

Tightened up the front end nicely. Major PAIN to install (having to lower the front engine cradle), but once all said and done the front end feels much more stable.

Donald Lightfoot - . - 5 out of 5

Rear Upper Control Arm Bushing - Rear position

starstarstarstarstar “Great design”

Easy to install.

federico cerboni - . - 5 out of 5

Front Steering Rack and Pinion Bushing

starstarstarstarstar “Extremely good quality product”

The product is of a very good quality, am very much pleased with it.

Bobby Mannan - . - 5 out of 5

Front Sway Bar Bushings - 26mm (1.02 inches)

starstarstarstarstar “Great”

Part was just as advertised.

Mark Davis - . - 5 out of 5

Motor Mount Bushings - Upper Position

starstarstarstarstar “Outstanding!”

Cheaper and works as good as replacing entire engine mount. Tied all my poly bushings together. Felt like it was the final piece to the puzzle. Once installed you can tell it stiffened the entire engine and transmission due to the increased vibration. Vibrates like crazy. Shifts smooth. Give up comfort for function! I love it!

Renzon Sulit - . - 5 out of 5

Front Lower Control Arm Bushings - Front Position

starstarstarstarstar “Great parts”

Really good quality and fit.

Irving Stein - . - 5 out of 5

Front Lower Control Arm Bushings - Rear Position

starstarstarstarstar “Great Bushings”

Really good fit. Not loose like the cheaper versions we have tried. Well worth the money.

Irving Stein - . - 5 out of 5

Rear Lower Trailing Arm Bushings - Rear Position

starstarstarstarstar “Quality Bushings”

Excellent quality and fit. Much better then the cheaper versions.

Irving Stein - . - 5 out of 5

Rear Sway Bar End Link Bushings

starstarstarstarstar “Great”

Company was a breeze to work with, the staff was knowledgeable and very helpful.

Justin Cowan - . - 5 out of 5

Rear Lower Sway Bar End Link Bushings

starstarstarstarstar “Great”

Good quality and extremely fast shipping.

Justin Cowan - . - 5 out of 5

Front Transmission Mount Bushings

starstarstarstarstar “Great bushings”

These were purchased for the crossmember brace for the transmission of my 1990 R32 GTR. The fit right in, and work great. \n\nThis is one of the only aftermarket kits available for the R32 GTR, and not crazy expensive either.

John Montgomery - . - 5 out of 5

Motor Mount Inserts

starstarstarstarstar “positive”

Installation was easy! I choose this over other brands due to durometer of the bushings. Other brands Ive seen on the forums shows them splitting due to the bushing been too stiff/rigid.

Victor - . - 5 out of 5

Steering Rack Bushing

starstarstarstarstar “positive”

Wanted something reliable & cost effective to remove the lurching of my R53 drivetrain. This along with the other motor mount inserts cure the problem without harshness & vibration. The combination of the inserts provided a nice connected feeling with the car. A feeling like holding the handle bars on a sport-bike.

Victor - . - 5 out of 5

Motor Mount Inserts - Rear Upper Position

starstarstarstarstar “positive”

Wanted something reliable & cost effective to remove the lurching of my R53 drivetrain. This along with the other motor mount inserts cure the problem without harshness & vibration. The combination of the inserts provided a nice connected feeling with the car. A feeling like holding the handle bars on a sport-bike.

Victor - . - 5 out of 5

Motor Mount Inserts - Rear Lower Mount

starstarstarstarstar “positive”

Wanted something reliable & cost effective to remove the lurching of my R53 drivetrain. This along with the other motor mount inserts cure the problem without harshness & vibration. The combination of the inserts provided a nice connected feeling with the car. A feeling like holding the handle bars on a sport-bike.

Victor - . - 5 out of 5

Front Lower Engine Support Bushing

starstarstarstarstar “positive”

Wanted something reliable & cost effective to remove the lurching of my R53 drivetrain. This along with the other motor mount inserts cure the problem without harshness & vibration. The combination of the inserts provided a nice connected feeling with the car. A feeling like holding the handle bars on a sport-bike.

Victor - . - 5 out of 5

Gearbox Mount Bushing - Insert Bushings

starstarstarstarstar “positive”

Wanted something reliable & cost effective to remove the lurching of my R53 drivetrain. This along with the other motor mount inserts cure the problem without harshness & vibration. The combination of the inserts provided a nice connected feeling with the car. A feeling like holding the handle bars on a sport-bike.

Victor - . - 5 out of 5

Rear Lower Control Arm Bushings - Rear Arm - Inner Position

starstarstarstarstar_border “excellent fit and too soon to comment on durability”

I replaced these as an overall suspension upgrade for my daily driver. I had put in another brands bushings and they were overkill. These SPs are a bit softer and engineered to "play nice" with the rest of the suspension while improving rear suspension stability. I am considering another pair of these for the trailing arm chassis mounts. Check out the very good you-tube video about the design differences between these and the competing brand. I drive a MkV Jetta TDi with GLi springs, Koni adjustables, and 26mm rear sway bar. -and it doesnt understeer any more!

Anthony Higgins - . - 4 out of 5

Front Steering Rack and Pinion Mount Bushings

starstarstarstarstar “Very good”

I have used these in my EVO X rally car and I am pleased with the product.

Dinesh Deheragoda - . - 5 out of 5

Rear Lower Control Arm Bushings - Inner Position

starstarstarstarstar “excellent aftermarket product to replace worn originals”

compared to pushing out original thin sleeves, installation was exceptionally easy, Honda service manual said the bolts were 12x1.25 however they are 14x1.25 or 1.50. Should be the last control arm work for a while, and made an exceptional ride in an older vehicle

Michael J Most - . - 5 out of 5

Front Lower Control Arm Bushings - Inner Front Position

starstarstarstarstar “Fantastic”

Great upgrade and replacement over the stock bushings. They fit perfectly and made a huge improvement in steering response and feedback. I highly recommend these if you need to replace your worn out stock bushings.

Scott - . - 5 out of 5

Rear Lower Control Arm Bushings - Rear Arm - Inner Position

starstarstarstarstar “Excellent”

AS advertised. Correct parts and easily installed. No problems and fast delivery. Very satisfied.

Thomas L. Richer tombo1942 - . - 5 out of 5

Rear Lower Control Arm Bushings - Rear Arm - Outer Position

starstarstarstarstar “Excellent”

Parts were what I needed. Installed properly and work as hoped. Great parts, service and communication.

Thomas L. Richer tombo1942 - . - 5 out of 5

Rear Lower Control Arm Bushings - Inner Position

starstarstarstarstar “Review 1 Year Later”

EXCELLENT PRODUCT. HAVE HAD NO ISSUE IN THE LAST YEAR AND 40K MILES. I WOULD DEFINATELY RECOMMEND THIS PRODUCT TO ANY ENTHUSIAST IN SEARCH OF A GOOD HANDLING RIDE

Henry Giron - . - 5 out of 5

Front Lower Control Arm Bushings

starstarstarstarstar “Review 1 Year Later”

EXCELLENT PRODUCT. HAVE HAD NO ISSUE IN THE LAST YEAR AND 40K MILES. I WOULD DEFINATELY RECOMMEND THIS PRODUCT TO ANY ENTHUSIAST IN SEARCH OF A GOOD HANDLING RIDE

Henry Giron - . - 5 out of 5

Rear Lower Control Arm Bushings - Inner Position

starstarstarstarstar “Excellent”

The cars handling is much improved over stock. Handling, steering response and feel are great

George S - . - 5 out of 5

Front Upper Control Arm Bushings - Adjustable - Inner or Outer

starstarstarstarstar “FANTASTIC!”

Only provides like "0.8" +/- camber which was all I needed.

Jamal Ramnarinesingh - . - 5 out of 5

Front Lower Control Arm Bushings - Front Position

starstarstarstarstar “Very nice upgrade”

I used these bushings for GD aluminum control arms mounted to a GC turbo cross member. Fits perfectly without the need for a press. Highly recommended.

Samuel Drupiewski - . - 5 out of 5

Rear Sway Bar Bushings - 17mm (0.66 inch)

starstarstarstarstar “very good”

Easy fit. Plenty of bushing grease. Good price

Q Rhinehardt - . - 5 out of 5

Front and Rear Enhancement Bushing Kit

starstarstarstarstar “easy to install”

These were easy to install and very good product. The only issue, the kit does not come with the rear lower control arm bushing. <br />

Craven Moorehead - . - 5 out of 5