w21082 | Front Sway Bar to Control Arm Bushings | Mazda RX3

  • w21082 Front Sway Bar to Control Arm Bushings
  • w21082 Front Sway Bar to Control Arm Bushings
  • w21082 Front Sway Bar to Control Arm Bushings

Front Sway Bar to Control Arm Bushings

Manufacturer: Whiteline
Part Number: w21082
Price: $19.26

check_box In Stock check_box Ships Immediately

Suggested part for w21082: whiteline-lubricant
whiteline-lubricant EZE Grease Polyurethane Bushing Lubricant and Prelube - 3 Pack
Whiteline provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.

    WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
FitmentFront Sway Bar to Control Arm Bushings w21082 fits these vehicles:

w21082 | Front Sway Bar to Control Arm Bushings | Mazda RX3

Whiteline Sway Bar Bushings

Intended to hold your sway bar in place, sway bar bushings play an important role in your suspension. Whereas OE bushings are made of a soft rubber, Whiteline Sway Bar bushings are made of synthetic elastomer, a much more durable material. Whiteline's elastomer does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long-lasting part on your sway bar with Whiteline's sway bar bushings. Synthetic elastomer sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Whiteline Sway Bar Bushing Bag
Whiteline Sway Bar Bushing Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact while driving. The sway bar is held tightly to the frame of the vehicle via sway bar bushings. Original Equipment rubber bushings, as mentioned previously, can warp and/or crack, losing their grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could (not) keep on a sway bar.

Whiteline w21082

Product Reviews for w21082 | Front Sway Bar to Control Arm Bushings | Mazda RX3

5 Star (1)
4 Star (0)
3 Star (0)
2 Star (0)
1 Star (0)

Whiteline w21082

5 out of 5 based on 1 user reviews. Write a Review


starstarstarstarstar" Great Product easy to install. "

I was impressed at the quality of the packaging and the ease of installation. These sway bar bushings are a great little addition to my Kia Pride/Ford Festiva. If you are replacing your control arms these are only super easy to thrown in during the repair. Installed these along with new shocks and springs, control arms and ball joints, and new strut mounts as well. Its difficult to discern the difference in performance but from the comparison of standard bushings after 300ks of road use im sure that I made the right decision.

verified_user Verified Buyer - - . Whiteline w21082 - 5 out of 5