• 11112 Rear Sway Bar and Endlink Bushings - 13mm (0.51 inch)
  • 11112 Rear Sway Bar and Endlink Bushings - 13mm (0.51 inch)

Rear Sway Bar and Endlink Bushings - 13mm (0.51 inch)

Manufacturer: Prothane
Part Number: 11112


Red (Accept Special Order, 2-3 weeks)
Price: $25.77

In Stock Ships Immediately


Rear Sway Bar Bushings - 13mm | Jeep Wrangler TJ 97-06

One Kit Covers Left and Right Side-Only Fits 13mm Size Bar
FitmentRear Sway Bar and Endlink Bushings - 13mm (0.51 inch) 11112 fits these vehicles:
  • 1 of Super Grease - 19-1750-001
  • 4 of Metal Sleeve for 63025 - 60705 (3/4 X 1.400 inches)
  • 2 of Rear Sway Bar Bushing, 13mm - 62104
  • 8 of End Link Bushing - 63025
  • Suggested part for 11112: 191750191750 Super Grease 3 Pack
    Prothane provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
  • Cross Reference from 11112 to 2.5111Energy Suspension 2.5111
    Price: $23.34
    Warranty: 2 Year Warranty

Prothane Sway Bar Bushings

A sway bar bushing plays a huge role in your suspension, so don't settle for rubber. Prothane Sway Bar bushings are made of polyurethane, a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Prothane's sway bar bushings. Prothane's polyurethane sway bar bushings provide a secure grip on the sway bar and does not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Prothane Bushing Box

Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes the your sway bar to lose it's effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Use Prothane's Super Grease

The metal sway bar rotates inside the sway bar bushings, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.

Prothane Control Arm Grease
Prothane 11112

Product Reviews for Rear Sway Bar Bushings 11112

Prothane 11112

5 out of 5 based on 134 user reviews. Write a Review

I replaced all the bushings on my 1998 Jeep. These really make a difference.
5 out of 5 - Excellent product
William I Applegate - . Prothane 11112
Great product, simple to install, great service, communication and fast shipping.
5 out of 5 - Very satisfied
Russell Goodman - . Prothane 11112

Product Reviews for Prothane Rear Sway Bar Bushings

Perfect fit for Z-51 sway bar.
5 out of 5 - Great.
Kenny Chuculate - . Prothane 71180
Everything is good.
5 out of 5 - Review 2 Years Later
Lawrence Baumruk - . Prothane 71121
The parts are holding up well, no issues.
5 out of 5 - Review 2 Years Later
Eugene Dwyer - . Prothane 61156
Perfect quality parts, no wear for 2 years.
5 out of 5 - Review 2 Years Later
franck begnis - . Prothane 61145
My car handles as good now as it did when I installed the parts.
5 out of 5 - Review 2 Years Later
steven soodik - . Prothane 11114
Perfect fit.
5 out of 5 - Great parts
Rade Pesic - . Prothane 11114
After 2 years, my sway bar bushings are still holding up strong! Would definitely buy again if I ever needed them!
5 out of 5 - Review 2 Years Later
Matthew D Rittman - . Prothane 81126
Excellent fit for replacing my rear sway bushings.
5 out of 5 - Perfect
Randy L Bronson - . Prothane 61148
This Rear Sway Bar Bushing Set, now completes the replacement of all rubber bushings to Prothane Bushings on my 1991, C4 Corvette. The improved handling is quite noticeable and was worth the effort.
5 out of 5 - Perfect Fit, Easy Installation
Graham Healer - . Prothane 71144
About 18 months after installed the parts, because of the normal wear and tear, the bushings were getting lose and making noise again. Editors Note: Prothane does not cover normal wear on their bushings. If the bushings are installed without greasing them it will cause them to wear more than normal. If you drive in extreme dusty conditions this will cause the wear.
5 out of 5 - Review 2 Years Later
Calvin Teng - . Prothane 191116

Compare with Similar Parts

This Part


  • 134
  • This part
  • Bushing Material: Polyurethane

This Part

Energy Suspension

$23.34($2.43) cheaper

  • 9
  • Bushing Material: Polyurethane

View Part

Customer Questions and Answers

I need to replace the rear sway bar end link bushings. I am seeing 2 different sizes. Which one is correct for my 1999 jeep tj se?
You would need to measure your sway bar to find out what size sway bar you have. That is the only difference in the bushings.