Includes Single Shock Absorber
4.0 Liter 6 Cyl. Engine
6 Cylinder. 1 Inch Taller taller than stock
1 Inch Taller
(Replaces Factory Body Mount Bushings)
Will only fit short arms made by Tera-flex
(Stock Arms Only)
Fits Left or Right Side
2 Piece Bushing Kit
2 kits required per truck.
1 Kit Required Per Vehicle.
1 Kit Required Per Vehicle
Contains Driver and Passenger Side Bushings
Extended 1.75 Inch for use with lifted vehicles. 2 per set
5 Inches Tall
Includes a Pair of Matching Bushings Fits 30mm Bar Only
Only Fits 30mm Bar
One Kit Covers Left and Right Side-Only Fits 30.5mm Size Bar
Only Fits 22mm Bar
One Kit Covers Left and Right Side-Only Fits 13mm Size Bar
Only Fits 16mm Bar
Includes a Pair of Matching Bushings
Fits 16mm Bar Only
Includes One Complete Link
ID or the bolt size is min 10.1 mm or max 10.3mm
Roughly 3/8 or 10mm bolt should work
Outer Diameter - 39mm
Outer Tube Length (length between flanges) - 30.15mm
Inner Sleeve Length - 41mm
fasten bolt diameter - 1/2in
Including Extended Bump Stops (4 Each Per Set)
For Gasoline Engine Types Only
Complete 1.5 Inch Lift Kit. One Kit covers front and rear.
Front and Rear (Includes Progressive Helix Coil Spacers/ Screw in Bump Stops/ Track bar brackets Front and Rear/ and shock absorbers)
Front and Rear (Includes Progressive Helix Coil Spacers/ Screw in Bump Stops/ Track bar brackets Front and Rear/ and shock absorbers) Camouflage
1-3/4 Inch Front and Rear Coil Spacer Kit. 1 Inch Body Mounts. 2-3/4 Inch total Lift
3 Inch Front and Rear Coil Spacer Kit. 1 Inch Body Mounts. 4 Inch total Lift
Including Extended Bump Stops and Scorpion Shock Absorbers Front and Rear (4 Each Per Set)
1-3/4 Inch Front and Rear Coil Spacer Kit. 1 Inch Body Mounts. 2-3/4 Inch total Lift. Includes Scorpion Shock Absorbers Front and Rear
0.4 inch increase
1 Inch Lift when installed on Front. 1.5 Inch Lift when installed on rear.
1.5 Inch Lift when installed on front. 2 Inch Lift when installed on Rear.
Front or Rear (2 Per Set)
(Use With or as Factory Isolator)(PR)
Kits Required: 2
Adjustable; Allows +/- 1-3/4 degrees of adjustment
Fits Left or Right Side. Allows 1-3/4 Degree Camber and Caster Adjustment.
Stud Design To Spin Not Articulate; W/ Dana 44 Axle
Adjustable; Allows +/- 1/2 degree of adjustment.
Adjustable; Allows +/- 2 degree of adjustment.
Fits Left or Right Side
Dodge 2500 models with a 3500 or 3850 lb axle only
Fits left or right side. Provides 0.5 Degree of Caster or Camber Adjustment.
Includes 2 Boots
Fits Driver Side Only. Grand Cherokee 5.2L V8 models will use a different part
Passenger Side - Connects to the Passenger Side Outer Connecting Tie Rod. Grand Cherokee 5.2L V8 Models will use a different part.
Fits Driver Side at Pitman Arm
Fits Passenger Side Only. Connecting Tie Rod
Except Right Hand Drive
At Pitman Arm
34 5/8 " Long
Fits Driver Side Only. Mounts between Driver Side Outer Tie Rod and Passenger Side Connecting Tie Rod.
Travel length is: 12.07 Inches collapsed to 19.32 inches extended.
off-road package only
Suspension.com wants to know..."What do your customers want us to make for them?"Tell us and we'll make sure they hear your vote!