• 11206 Rear Track Arm Bushings
  • 11206 Rear Track Arm Bushings

Rear Track Arm Bushings

Manufacturer: Prothane
Part Number: 11206
Rating 25 Reviews


Price: $16.77

In Stock Ships Immediately

Rear Track Arm Bar Bushings - Jeep Wrangler TJ - 11206

  • One Set Will Cover the Left and Right Side
FitmentRear Track Arm Bushings 11206 fits these vehicles:
  • 4 of Rear Track Arm Bushings - 61109
  • 2 of Metal Sleeves for 61109 - 60711
  • 1 of Super Grease - 19-1750-001
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
  • Cross Reference from 11206 to 2.7103Energy Suspension 2.7103
    Price: $15.86
    Warranty: 2 Year Warranty

Secure Your Suspension

Under normal circumstances your suspension shifts slightly when you turn a corner. The amount of shifting that takes place is largely determined by the quality of track arm (a.k.a panhard rod) bushings installed on your vehicle. Your track arm, and it's supporting bushings, are designed to accomplish several tasks: keeping your suspension aligned with the rest of your vehicle, eliminating excess body roll, and increasing your overall handling.

Prothane Bushing Box

Whiteline Bag

Prothane Track Bar Bushings

OE track arm bushings are typically made of rubber. While rubber does a decent job of absorbing vibrations from the road, it doesn't hold up for long when put into high-stress environments. Prothane makes all of their track arm bushings out of polyurethane. Capable of easily dealing with pressure, heat, and corrosion, these polyurethane bushings are sure to outlast the OE rubber. This dramatic increase to durability can also lead to a slight increase in NVH, due to polyurethane's sturdier nature. But, your enhanced control and safety are well worth it. Plus, Prothane covers all of their track arm bushings with a lifetime warranty handled in-house here at DST.

Prothane 11206

Product Reviews for Rear Track Arm Bar Bushings 11206

Prothane 11206

5 out of 5 based on 25 user reviews. Write a Review

Looks nice and it helped to reduce woobbling in my TJ 2004.
5 out of 5 - great product
Jorge A Salas Diaz - . Prothane 11206
Easy to install and fixed the problem.
5 out of 5 - Good product.
Barry Joyner - . Prothane 11206
<p>First of all, the product listed on the website was listed for my 97 Wrangler. After further research I found (after ordering) that the part was labeled wrong on the web site. The part I ordered was for a WJ. The team fixed my problem after having to renegotiate the correct price. Days later the part was still labeled wrong on their website??? The part itself was OK. I had to drill out the sleeve a little for the bolt to go through. But I did like the 2 piece design. It was very easy to install.</p><p> </p><p>(Editorial Note)</p><p>The manufacturer lists this kit to fit the 97-06 Jeep Wrangler TJ.<br /></p>
5 out of 5 - A little off size
Edward Bender - . Prothane 11206

Product Reviews for Prothane Rear Track Arm Bar Bushings

They worked fine up until I lost control of car and totaled it last year.
5 out of 5 - Review 2 Years Later
Al Kolenda - . Prothane 181205
I am very impressed with the product and important the service.\nI have purchased products from your company 2 times. \nAlways very good service and cheap international shipping.\n\nI will always come back to your company.\nThank and Greats from Belgium.
5 out of 5 - Review 2 Years Later
Brecht Van Cauwenberghe - . Prothane 7302
Installed one end only, works fine.
5 out of 5 - Review 1 Year Later
bruce given dstorm43 - . Prothane 11204
They worked really well.
5 out of 5 - Very
garry adams - . Prothane 71209
This part was a perfect match for my panhard rod. Its important to get the right one, since Chevy had two different designs in the early vs. late 60s models. The only difference in this part is that my OEM metal inserts had serrated ends--greater resistance to slipping I suppose, or maybe less prone to rust together? Anyway, this part fit and works great.
4 out of 5 - Good
Jonathon Yarger - . Prothane 71207
A year later and still good and tight fit no more loose or sloppy. Been good since
5 out of 5 - Review 1 Year Later
Will Filene - . Prothane 11204
Ease of installation without special tools and perfect fitment
5 out of 5 - exceptional
Seth Lacey / six14life - . Prothane 71209
Working great!!!!!
5 out of 5 - Review 1 Year Later
Curtis West - . Prothane 7302
this was a very good fitting part and will buy other items again from you.
5 out of 5 - very good fit
lynn m allen - . Prothane 71209
Super fast shipping, Thank you <br />
5 out of 5 - Great Deal
John Mitchell - . Prothane 11204

Compare with Similar Parts

This Part


  • 25
  • This part
  • Bushing Material: Polyurethane

This Part

Energy Suspension

$15.86($0.91) cheaper

  • 7
  • Bushing Material: Polyurethane

View Part