• 11124 Rear Sway Bar and Endlink Bushings - 14.28mm  (0.56 Inch)
  • 11124 Rear Sway Bar and Endlink Bushings - 14.28mm  (0.56 Inch)

Rear Sway Bar and Endlink Bushings - 14.28mm (0.56 Inch)

Manufacturer: Prothane
Part Number: 11124
Rating 134 Reviews


Red (Accept Special Order, 2-3 weeks)
Price: $26.37

In Stock Ships Immediately

Rear Sway Bar Bushings 14.28mm | Jeep Wrangler TJ 97-06

FitmentRear Sway Bar and Endlink Bushings - 14.28mm (0.56 Inch) 11124 fits these vehicles:
  • 1 for Super Grease - 19-1750-001
  • 4 for Metal Sleeves for 63025 - 60705 (3/4 X .093 X 1.400 inches)
  • 2 for Rear Sway Bar Bushing, 9/16 inch - 62220
  • 8 for Rear End Link Bushings - 63025
  • Suggested part for 11124: dll116-reardll116-rear Rear Sway Bar Lateral Locks - 14-16mm
    DST Silver Color - Limited Lifetime Warranty

  • Suggested part for 11124: kll116kll116 Sway Bar Lateral Locks - 15-16mm
    Whiteline Gold Color Plated - 3 Year Warranty

  • Suggested part for 11124: 191750191750 Super Grease 3 Pack
    Prothane provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."

Prothane Sway Bar Bushings

A sway bar bushing plays a huge role in your suspension, so don't settle for rubber. Prothane Sway Bar bushings are made of polyurethane, a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Prothane's sway bar bushings. Prothane's polyurethane sway bar bushings provide a secure grip on the sway bar and does not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Prothane Bushing Box

Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes the your sway bar to lose it's effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Use Prothane's Super Grease

The metal sway bar rotates inside the sway bar bushings, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.

Prothane Control Arm Grease
Prothane 11124

Product Reviews for Rear Sway Bar Bushings 11124

Prothane 11124

5 out of 5 based on 134 user reviews. Write a Review

No problem to install. The fitment was perfect!
5 out of 5 - Easy to install
Edward Stafursky - . Prothane 11124

Product Reviews for Prothane Rear Sway Bar Bushings

Everything is good.
5 out of 5 - Review 2 Years Later
Lawrence Baumruk - . Prothane 71121
The parts are holding up well, no issues.
5 out of 5 - Review 2 Years Later
Eugene Dwyer - . Prothane 61156
Perfect quality parts, no wear for 2 years.
5 out of 5 - Review 2 Years Later
franck begnis - . Prothane 61145
My car handles as good now as it did when I installed the parts.
5 out of 5 - Review 2 Years Later
steven soodik - . Prothane 11114
Perfect fit.
5 out of 5 - Great parts
Rade Pesic - . Prothane 11114
After 2 years, my sway bar bushings are still holding up strong! Would definitely buy again if I ever needed them!
5 out of 5 - Review 2 Years Later
Matthew D Rittman - . Prothane 81126
Excellent fit for replacing my rear sway bushings.
5 out of 5 - Perfect
Randy L Bronson - . Prothane 61148
This Rear Sway Bar Bushing Set, now completes the replacement of all rubber bushings to Prothane Bushings on my 1991, C4 Corvette. The improved handling is quite noticeable and was worth the effort.
5 out of 5 - Perfect Fit, Easy Installation
Graham Healer - . Prothane 71144
About 18 months after installed the parts, because of the normal wear and tear, the bushings were getting lose and making noise again. Editors Note: Prothane does not cover normal wear on their bushings. If the bushings are installed without greasing them it will cause them to wear more than normal. If you drive in extreme dusty conditions this will cause the wear.
5 out of 5 - Review 2 Years Later
Calvin Teng - . Prothane 191116
I recently installed it on my Vette and really feel an improvement in ride, fully recommended.
5 out of 5 - Great item
Rodolfo Rivera - . Prothane 71144