unarchive In The Box of 12204 keyboard_arrow_down
- 4 of Front Control Arm Bushings - 64404
- 2 of Front Control Arm Bushings - 64405
- 2 of Front Control Arm Bushings - 64406
- 2 of Front Control Arm Bushings - 64407
- 2 of Front Control Arm Bushings - 64408
- 4 of Metal Sleeves 60731 (.813 X .625 ID X 2.250 inches)
- 2 of Metal Sleeves 60702 (.875 X .500 ID X 2.750 inches)
- 2 of Metal Sleeves 60950 (7/8 X .188 X 2.350 inches)
add_shopping_cart Suggested Parts 2keyboard_arrow_down
3 - 5ML High Performance Grease by Prothane
14 Ounce Tube Suitable for Grease Guns
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
shuffle Cross References 1keyboard_arrow_down
Polyurethane.
Price: $109.21
Warranty: 7 Year Warranty
Mazda Miata Front Control Arm Bushing Kit
Prothane Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace those faulty O.E. rubber bushings with Prothane's polyurethane control arm bushings. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency.
Prothane's polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Use Prothane's Super Grease
Control arm bushings are a high stress part, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.
Product Reviews for Mazda Miata Front Control Arm Bushing Kit
- 5 Star (4)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Prothane 12204
starstarstarstarstar" Everything good "
Great communication parts were on back order and they kept me in the loop.
verified_user Verified Buyer - Michael Kennedy - . Prothane 12204 - 5 out of 5starstarstarstarstar" All around good buy "
Great product, fast shipping, wish I'd ordered red.. but that's my fault!
verified_user Verified Buyer - Shane Onuma - . Prothane 12204 - 5 out of 5starstarstarstarstar" Perfet Fit, easy to install "
Perfect Fit, it feels OK when driving. Very easy to install
verified_user Verified Buyer - Carlos I Nieves Rubio - . Prothane 12204 - 5 out of 5starstarstarstarstar" Best of the BEST! "
<p>These are the best parts on the market bar none! The folks there are great</p><p>In the world today it was a great surprise!</p><p>And the price saved me well over 2 hundred if I had used parts from the local autoparts places</p><p>Save cash and get great service and the best replacement parts out there TODAY!</p><p>Keith A. FLA.</p>
verified_user Verified Buyer - Keith Fielder - . Prothane 12204 - 5 out of 5compare_arrows Compare with Similar Parts
($21.84) more expensive
- starstarstarstarstar5
- Bushing Material: Polyurethane