unarchive In The Box of 191820 keyboard_arrow_down
- 2 of 71007 - Large Dust Boot (1.95in Base X 1.92in Height X 0.71in Pin)
- 2 of 71006 - Small Dust Boot (1.82in Base X 1.50in Height X 0.80in Pin)
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Prothane Polyurethane Universal Dust Boots
Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Prothane makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water, and snow.
How-to obtain measurements
In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call. It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.
After Measureing Your Dust Boots
Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.
Product Reviews for
- 5 Star (11)
- 4 Star (0)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
starstarstarstarstar" Great fit for universal product "
This box came with two different sizes. The shorter two in height of the four fit the Moog upper ball joints very well in 97 Ford F150 rwd. The only thing is the height could have been 1/4" shorter to stop from mashing them down as much as they did. Hold grease very well. Time will tell if they last. They are much better than the flimsy stock Moog rubber grease boots that didnt last 30,000 miles. I called Moog to get the boot height, but I didnt consider moogs boots are like an accordion and stretch out to hold grease. They told me 1 1/2" height but I could have used 1 1/4" height boots. I highly recommend this product.verified_user Verified Buyer - william shotwell - . Prothane 191820 - 5 out of 5
starstarstarstarstar" excellent quality WAY better than stock rubber "
Fit like a glove.verified_user Verified Buyer - Kurt Schmidlin - . Prothane 191820 - 5 out of 5
starstarstarstarstar" Review 1 Year Later "
Great Products.verified_user Verified Buyer - Skyler Knapp - . Prothane 191820 - 5 out of 5
starstarstarstarstar" Great kit for tie rod boots "
Used this kit for a 99 dodge 1 ton van, biggest boots fit the tie rods and saved me from buying a tie rod just to get a new boot.verified_user Verified Buyer - Robert Gunn - . Prothane 191820 - 5 out of 5