lock Warranty Information keyboard_arrow_down
WARRANTY:
DST carries a 5-Year Warranty.
DST warrants their parts to be free of defects in materials and/or workmanship during this timeframe as measured from the date of purchase.
If a DST part should fail due to materials or manufacturing defects while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
diyprimadh | DIY Primer and Adhesive | Urethane to Metal
This kit is composed of a primer and adhesive that will prepare metal surfaces for a secure binding with liquid urethane.
Urethane is commonly used by DIYers and garage manufacturers for everything from truck-bed equipment isolators to skateboard wheels. There can be a need to mold liquid urethane while simultaneously binding it to a metallic surface. If your application requires the urethane to be molded onto a flat surface then this primer and the adhesive kit will give you a secure bond.
Perfect for DIY Urethane Projects
The bond created by this combination of primer and adhesive will resist water, salt spray, several solvents, and many environmental factors. The duo can also be used to bind liquid urethane with already cured urethane, making larger projects possible.
You can use the daubers that are attached to the lids of the cans to apply the primer and adhesive, or you can dip, brush, roller coat, or dilute the solutions for a spray application. The 4oz cans of primer and adhesive each have a coverage of about 8sq. ft. and for best results, the dried thickness of the coating should be 0.5-1mil. For safety and instruction, be sure to read the technical information and safety guidelines:
Urethane to Metal Bonding Agent
If your project depends on a secure, reliable bond between metal and urethane the combination of this primer and adhesive will give you the best bond possible. The surface should be mechanically or chemically cleaned to ensure a good seal with metals such as...
- Cast Iron
- Steel
- Stainless Steel
- Aluminum
- Brass
- Zinc
- and More
This bonding system works perfectly with DST's DIY Liquid Urethane Kits. So, if searching for a strong urethane-to-metal bond has been holding your project back, look no further!
Product Reviews for diyprimadh | DIY Primer and Adhesive | Urethane to Metal
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
DST diyprimadh
starstarstarstarstar" I am satisfied! "
Polyurethane could not be poured at first. Then I find instructions for forschpolymer.com an everything worked out.
verified_user Verified Buyer - Anatolijs Marhilevics - . DST diyprimadh - 5 out of 5