moog-ck620054 | Front Upper Control Arm and Ball Joint | GMC Sierra

  • moog-ck620054 Front Upper Control Arm and Ball Joint
  • moog-ck620054 Front Upper Control Arm and Ball Joint

Front Upper Control Arm and Ball Joint

Manufacturer: MOOG
Part Number: moog-ck620054
Price: $130.24

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Upper Control Arm and Ball Joint moog-ck620054 fits these vehicles:
Details

moog-ck620054 | Front Upper Control Arm and Ball Joint | GMC Sierra

2007 Chevrolet Silverado 2500 HD
  • Fits submodels
    • LT
    • LTZ
    • WT
2007 GMC Sierra 2500 HD
  • Fits submodels
    • SLE
    • SLT
    • WT

For offset bushings that allow 3 added degrees of camber ck620053

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. These ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

MOOG moog-ck620054

Product Reviews for moog-ck620054 | Front Upper Control Arm and Ball Joint | GMC Sierra

5 Star (3)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-ck620054

5 out of 5 based on 3 user reviews. Write a Review

M
verified_user

starstarstarstarstar" good parts and a good value "

Moog is top quality!

verified_user Verified Buyer - - . MOOG moog-ck620054 - 5 out of 5
T
verified_user

starstarstarstarstar" Review 1 Year Later "

The parts are great. They have been on the truck since June.

verified_user Verified Buyer - - . MOOG moog-ck620054 - 5 out of 5
M
verified_user

starstarstarstarstar" good parts and a good value "

Moog is top quality!

verified_user Verified Buyer - - . MOOG moog-ck620054 - 5 out of 5
Fitment for moog-ck620054
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
ChevroletAvalanche 25002006-2002Front Upper Quantity 2
ChevroletSilverado 1500 HD2006-2001Front Upper Quantity 2
ChevroletSilverado 1500 HD Classic2007Front Upper Quantity 2
ChevroletSilverado 25002004-2001Front Upper Quantity 2
ChevroletSilverado 25002000-1999Front Upper4WD Quantity 2
ChevroletSilverado 2500 HD2010-2001Front Upper Quantity 2
ChevroletSilverado 2500 HD Classic2007Front Upper Quantity 2
ChevroletSilverado 35002006-2001Front Upper Quantity 2
ChevroletSilverado 3500 Classic2007Front Upper Quantity 2
ChevroletSilverado 3500 HD2010-2007Front Upper Quantity 2
ChevroletSuburban 25002012-2001Front Upper Quantity 2
ChevroletSuburban 25002000Front Upper4WD Quantity 2
GMCSierra 1500 HD2006-2001Front Upper Quantity 2
GMCSierra 1500 HD Classic2007Front Upper Quantity 2
GMCSierra 25002004-2001Front Upper Quantity 2
GMCSierra 25002000-1999Front Upper4WD Quantity 2
GMCSierra 2500 HD2010-2001Front Upper Quantity 2
GMCSierra 2500 HD Classic2007Front Upper Quantity 2
GMCSierra 35002006-2001Front Upper Quantity 2
GMCSierra 3500 Classic2007Front Upper Quantity 2
GMCSierra 3500 HD2010-2007Front Upper Quantity 2
GMCYukon XL 25002012-2001Front Upper Quantity 2
GMCYukon XL 25002000Front Upper4WD Quantity 2
HummerH22009-2003Front Upper Quantity 2

question_answer Customer Questions and Answers


Question:
I see two possible upper controls arm for my suburban... moog-ck620054 and moog-Rk620054.... can you tell me the major differences in these. My goal is to freshen up the front-end so the suburban drives like a much new truck. It now has a 180K miles on it. Do you have any suggested parts kits that won't break my bank but help out with the handing? Thanks
Answer:
Starting with the CK.The CK are Moog's Premium line of control arms. Utilizing their “problem solver” technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK cont trol arms include ball joints that are powder coated metal with gusher bearings giving them a long life. These ball joints are serviceable and have grease fittings. The CK arms also have problem solver bushings and a precise fit and form for easy installation. The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative. ...see more

Question:
What difference is there between moog-ck620054 and moog-ck620053?
Answer:
The CK620053 comes with offset control arm bushings which will supply an additional 2 degrees of camber. You would want these if you have a lift kit and your camber is already maxed out. CK620054 comes with the standard bushings giving no extra cambe er adjustment. ...see more

Question:
What is the difference between part numbers ck620054 and ck620053?
Answer:
Part number ck620054 has the standard bushings and part number ck620053 has the offset bushings.

Question:
What is the difference between part numbers ck620054 and rk620054?
Answer:
Part number ck620054 is part of Moog's problem solver line, comes with a greaseable ball joint and has a lifetime warranty. Part number rk620054 is the standard replacement, does not have a greaseable ball joint, and has a 3 year warranty.

Question:
What is the part number for just the dust boot from part number ck620054?
Answer:
Moog does not sell their dust boots separately from the part itself.

Question:
Do these come with Moog-K6696 upper ball joints?
Answer:
Yes, part number moog-ck620054 comes with Moog-K6696 for the ball joints.

Question:
Does part number ck620054 include the offset bushings?
Answer:
No, part number ck620054 does not include the offset bushings.

Question:
Are these polyurethane bushings in the arm ck620054? it's for a 2003 GMC Sierra 2500hd.
Answer:
No, Moog does not make polyurethane bushings within their control arms. I do apologize for this inconvenience. However, if you want polyurethane control arms bushings the best part to get is 3.3185 https://www.suspension.com/3.3185 these will work on n the CK Moog arms. ...see more

Question:
When searching for control arms (upper/lower), it shows 2 types for the upper and lower. However the lower ones look the same but have 100$ in price difference. Can you explain what the difference is between the two?
Answer:
Starting with the CK.The CK are Moog's Premium line of control arms. Utilizing their “problem solver” technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK cont trol arms include ball joints that are powder coated metal with gusher bearings giving them a long life. These ball joints are serviceable and have grease fittings. The CK arms also have problem solver bushings and a precise fit and form for easy installation. The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative. ...see more