moog-ck80942 | Front Upper Control Arm and Ball Joint | Escalade

  • moog-ck80942 Front Upper Control Arm and Ball Joint
  • moog-ck80942 Front Upper Control Arm and Ball Joint

Front Upper Control Arm and Ball Joint

Manufacturer: MOOG
Part Number: moog-ck80942
Price: $126.38

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Upper Control Arm and Ball Joint moog-ck80942 fits these vehicles:
Details

moog-ck80942 | Front Upper Control Arm and Ball Joint | Escalade

Standard Bushing.
  • For Offset Bushings that Allow 2 Added Degrees of Camber Use ck80826 Instead.

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. These ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

Fitment for moog-ck80942
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
CadillacEscalade2006-2002Front Upper Quantity 2
CadillacEscalade ESV2006-2003Front Upper Quantity 2
CadillacEscalade EXT2006-2002Front Upper Quantity 2
ChevroletAvalanche 15002006-2002Front Upper Quantity 2
ChevroletExpress 15002014-2003Front Upper Quantity 2
ChevroletExpress 25002005-2003Front Upper Quantity 2
ChevroletSilverado 15002006-1999Front Upper Quantity 2
ChevroletSilverado 1500 Classic2007Front Upper Quantity 2
ChevroletSuburban 15002006-2000Front Upper Quantity 2
ChevroletTahoe2006-2001Front Upper Quantity 2
ChevroletTahoe2000Front Upper Quantity 2 4.8L V8 294cid
ChevroletTahoe2000Front Upper Quantity 2 5.3L V8 5328cc/325cid
GMCSavana 15002014-2003Front Upper Quantity 2
GMCSavana 25002005-2003Front Upper Quantity 2
GMCSierra 15002006-1999Front Upper Quantity 2
GMCSierra 1500 Classic2007Front Upper Quantity 2
GMCYukon2006-2001Front Upper Quantity 2
GMCYukon2000Front Upper Quantity 2 4.8L V8 294cid
GMCYukon2000Front Upper Quantity 2 5.3L V8 5328cc/325cid
GMCYukon XL 15002006-2000Front Upper Quantity 2

question_answer Customer Questions and Answers


Question:
Does the moog-ck80942 control arms have polyurethane bushings in them?
Answer:
The moog-ck80942 will not have a polyurethane bushing, they will be a steel clad bushings.

Question:
Will ck80942 fit both sides?
Answer:
Yes, part number moog-ck80942 will fit both sides of your vehicle.

Question:
Should I use the ck80942 control arm or the CK80826 with the offset bushings on my Yukon. It is not lifted.
Answer:
I would use the ck80942 arm since your vehicle is not lifted. Your factory adjustments will be ok and you do not need the additional camber/caster that the ck80026 will provide.

Question:
Is part number ck80942 sold in pairs or is it sold individually?
Answer:
Part number ck80942 is sold individually.