moog-rk100106 | Rear Upper Control Arm Assembly | 03-07 Honda Accord

  • moog-rk100106 Rear Upper Control Arm and Ball Joint Assembly
  • moog-rk100106 Rear Upper Control Arm and Ball Joint Assembly

Rear Upper Control Arm and Ball Joint Assembly

Manufacturer: MOOG
Part Number: moog-rk100106
Price: $79.43

check_box In Stock check_box Ships Immediately


Suggested part for moog-rk100106: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
grease-gun-combo

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentRear Upper Control Arm and Ball Joint Assembly moog-rk100106 fits these vehicles:
Details

moog-rk100106 | Rear Upper Control Arm Assembly | 03-07 Honda Accord

Allows for minus 2 to plus 4 degrees of camber

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

question_answer Customer Questions and Answers


Question:
Does Moog's Rear upper Control Arm and Ball Joint Assembly Part Number rk100106 have to be greased before installing or does it come pre greased?
Answer:
Moog''s Rear Upper Control Arm and Ball Joint Assembly Part Number rk100106 comes already pre greased but it should be greased again after installation and every oil change.

Question:
Does moog-rk100106 come in pairs (one for each side)?
Answer:
moog-rk100106 is sold individually. Not in pairs.

Question:
What kind of grease do I use for the control arms? Do I need to apply grease to the ball joint?
Answer:
moog-rk100106 must be greased after it is installed. Use a good petroleum/synthetic chassis grease.