moog-rk100169 | Front Right Upper Control Arm | Jeep Grand Cherokee

  • moog-rk100169 Front Upper Control Arm and Ball Joint Assembly - Passenger Side
  • moog-rk100169 Front Upper Control Arm and Ball Joint Assembly - Passenger Side

Front Upper Control Arm and Ball Joint Assembly - Passenger Side

Manufacturer: MOOG
Part Number: moog-rk100169
Price: $114.65

check_box In Stock check_box Ships Immediately

Suggested part for moog-rk100169: moog-rk100168
moog-rk100168 Front Upper Control Arm and Ball Joint Assembly - Driver Side
Front Upper Control Arm and Ball Joint Assembly - Driver Side

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Upper Control Arm and Ball Joint Assembly - Passenger Side moog-rk100169 fits these vehicles:

moog-rk100169 | Front Right Upper Control Arm | Jeep Grand Cherokee

Allows for plus or minus 1 degree of camber or caster

For driver side use rk100168

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

question_answer Customer Questions and Answers

What is the difference between part numbers rk100169 and rk621607?
The rk621607 is a standard stock replacement and the rk100169 is adjustable +/- 1 degree of camber/caster.

Moog RK100169 or RK100168 do not have grease fittings and seem like there’s no grease in them. Is this common and sustainable for the ball joint?
Moog RK100169 or RK100168 are not greaseable. After the control arm is assembled the ball joint is greased and sealed. The ball joint does not require to be greased after the arm is installed.

Are the ball joints on rk100169 supposed to be installed as they are in the pictures?
Yes, on moog-rk100169 the control arm will come fully assembled. It has an adjustable ball joint. After it is installed you rotate it to set your camber/caster alignment angle.