moog-rk100321 | Rear Upper Control Arm | 2003-2019 Mitsubishi Outlander

  • moog-rk100321 360image 1
  • moog-rk100321 Rear Upper Control Arm
  • moog-rk100321 Rear Upper Control Arm
  • moog-rk100321 Rear Upper Control Arm
  • moog-rk100321 Rear Upper Control Arm
  • moog-rk100321 360image large 1

Rear Upper Control Arm

Manufacturer: MOOG
Part Number: moog-rk100321
Price: $160.37

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentRear Upper Control Arm moog-rk100321 fits these vehicles:
Details

moog-rk100321 | Rear Upper Control Arm | 2003-2019 Mitsubishi Outlander

Allows for plus or minus 2 degrees of camber

2017 Jeep Compass
  • Fits US built models with a VIN that begins with 1
2003 Mitsubishi Lancer
  • Fits submodels: ES, LS, and OZ Rally
2004 Mitsubishi Lancer
  • Fits submodels: ES, LS, OZ Rally, Ralliart, Sportback, and Sportback Ralliart
2005-2006 Mitsubishi Lancer
  • Fits submodels: ES, OZ Rally, and Ralliart
2008 Mitsubishi Lancer
  • Fits submodels: DE, ES, and GTS
2009 Mitsubishi Lancer
  • Fits submodels: DE, ES, GTS, Ralliart, and SE
2010 Misubishi Lancer
  • Fits submodels: DE, ES, GTS, GTS Sportback, Ralliart, Ralliart Sportback, and SE
2011 Mitsubishi Lancer
  • Fits submodels: DE, ES, ES Sportback, GT, GT Sportback, GTS, GTS Sportback, Ralliart, Ralliart Sportback, SE, and SE Sportback
2012-2014 Mitsubishi Lancer
  • Fits submodels: DE, ES, ES Sportback, GT, GT Sportback, Ralliart, SE, and SE Sportback
2015 Mitsubishi Lancer
  • Fits submodels: DE, ES, GT, GT Sportback, Ralliart, SE, SE Limited Edition, and SE Sportback

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

MOOG moog-rk100321

Product Reviews for moog-rk100321 | Rear Upper Control Arm | 2003-2019 Mitsubishi Outlander

5 Star (1)
50%
4 Star (1)
50%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar_border

MOOG moog-rk100321

4 out of 5 based on 2 user reviews. Write a Review

R
verified_user

starstarstarstarstar" Perfect fit, Perfect solution "

These were a relatively easy to install and a good solution for a tire wear issue I had been experiencing with my 2010 Jeep Patriot. My rear tires both had negative camber which lead to bad tire wear on the insides of the tires. The parts that came off were worn, and made cheap. This part was a perfect fit, and much heavier construction. These were also the best price from any where I could find for an adjustable Upper Control Arm, and that was including the cost of shipping the parts to Canada.

verified_user Verified Buyer - - . MOOG moog-rk100321 - 5 out of 5
B
verified_user

starstarstarstarstar_border" Very good prduct! "

I liked this product. Had a few problems shipping to Canada but customer service fixed every thing. Very good customer service! Just wished the shipping was faster for the price !!

verified_user Verified Buyer - - . MOOG moog-rk100321 - 4 out of 5
Fitment for moog-rk100321

question_answer Customer Questions and Answers


Question:
The price is for pair or per piece.
Answer:
Moog-rk100321 is sold individually.

Question:
Is the moog-rk100321 adjustable?
Answer:
Moog-rk100321 is adjustable. The camber adjustment range is + or - 2 degrees.

Question:
What is the difference between rk100114 vs rk100321?
Answer:
Both rear arms are adjustable for camber. The main difference is the way the adjustment is made. The rk100114 adjustment is made by loosening 2 bolts and sliding the arm to adjust camber. The rk100321 is a turn buckle design. You loosen the jam nut a and turn the turn buckle to adjust camber. ...see more