lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
What is the Difference Between Moog R Series and CK Control Arms?
CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.
Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.
CK (K): Moog Problem Solver
Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.
RK: Moog R Series
The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.
Type and Warranty
Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.
Product Reviews for moog-rk620264 | Front Lower Control Arm | 99-07 Chevy Silverado 1500
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-rk620264
starstarstarstarstar" Review 1 Year Later "
I am pleased.
verified_user Verified Buyer - Bruce Harmon - . MOOG moog-rk620264 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
I am pleased.
verified_user Verified Buyer - Bruce Harmon - . MOOG moog-rk620264 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Moog-RK620264 and RK620265 do they come with the ball joint and is it installed into the arm?
- Answer:
- Moog-RK620264 and RK620265 are both installed with ball joints and bushings. The ball joints are greaseable and come with a zerk fitting for future greasing.
- Question:
- Is there a replacement grease boot for ball joint mounted in rk620264 lower control arm. Boot failed one week after install.
- Answer:
- Moog does not sell just the dust boots. We offer universal polyurethane dust boots that are sold by dimensions. Put this link in a Google or Yahoo search: https://www.suspension.com/universal-dust-boots.asp.
- Question:
- Does the lower control arms come with the polyurethane bushings?
- Answer:
- Moog control arms does not have polyurethane bushings. Only rubber bushings.
- Question:
- For RK620264 and RK80942, what size zert fittings do they use?
- Answer:
- Moog uses 1/4x28 zerk fittings.
- Question:
- Does Moog manufacture a C/CK series complete lower control arm assembly for the 1999-2002 GMC Sierra 1500 2 wd pickup (extended cab, short bed, 5.3 gas) or is the RK series control arm the only option?
- Answer:
- Unfortunately, Moog will only offer the RK series arms for the lower replacements on the 99-02 Sierra 1500. RK620265 is the front left lower RK620264 is the front right lower.