moog-rk620616 | Front Right Upper Control Arm | 2003-2007 Honda Accord

  • moog-rk620616 Front Upper Control Arm And Ball Joint - Passenger Side
  • moog-rk620616 Front Upper Control Arm And Ball Joint - Passenger Side

Front Upper Control Arm And Ball Joint - Passenger Side

Manufacturer: MOOG
Part Number: moog-rk620616
Price: $48.63

check_box In Stock check_box Ships Immediately

Suggested part for moog-rk620616: moog-rk620617
moog-rk620617 Front Upper Control Arm And Ball Joint - Driver Side
Front Upper Control Arm And Ball Joint - Driver Side

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

Cross Reference from moog-rk620616 to beckarnley-102-5289
Beck Arnley beckarnley-102-5289
. Standard OE replacement.
Price: $50.94
Warranty: 3 Years or 50000 Miles

question_answer Ask us a Question

FitmentFront Upper Control Arm And Ball Joint - Passenger Side moog-rk620616 fits these vehicles:

moog-rk620616 | Front Right Upper Control Arm | 2003-2007 Honda Accord

2003 Honda Accord
  • Fits vehicles built for United States and Canadian Markets
For the driver side use rk620617

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

compare_arrows Compare with Similar Parts

This Part
moog-rk620616 compare
  • star_borderstar_borderstar_borderstar_borderstar_border
  • This part
  • Bushing Material: Rubber
Beck Arnley
Beck Arnley compare
($2.31) more expensive
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Standard OE replacement.

question_answer Customer Questions and Answers

What is the difference between Moog and Beck Arnley parts besides the price?
Beck Arnley and Moog's RK line offer comparable warranties of 3 years and are considered reputable brands in the automotive parts industry. This suggests that both brands have confidence in the quality and durability of their products, which can be r reassuring for consumers looking for reliable suspension and steering components for their vehicles. When choosing between these two options, you might also want to consider factors like specific product features, compatibility with your vehicle, availability, pricing, and any customer reviews or feedback you can find. Ultimately, selecting the brand and product that best meets your needs and preferences will help ensure a positive experience with your vehicle's maintenance and performance. ...see more

The boot around the ball joint on a upper control arm. Is the boot sealed or will grease come out when greasing?
There is a grease relief in the dust boot. It is usually on the small end of the dust boot. When the ball joint is overfilled it will relieve itself.

Is the moog-rk620616 pre-greased? do I need to grease upon install?
Moog control arms will come pre-greased. If your control arm has a grease zerk it is recommended to grease upon install with a 100% synthetic grease.

Can you grease part number RK620616?
Unfortunately this does not have a zerk fitting so part number RK620616 is not greaseable.

Does part number rk620616 need to be greased since there is no zerk fitting?
Yes, you will still need to grease part number rk620616 after installation.