lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Front Right Lower Control Arm | 2005-2015 Toyota Tacoma
What is the Difference Between Moog R Series and CK Control Arms?
CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.
Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.
CK (K): Moog Problem Solver
Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.
RK: Moog R Series
The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.
Type and Warranty
Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.
Product Reviews for Front Right Lower Control Arm | 2005-2015 Toyota Tacoma
- 5 Star (8)
-
-
- 89%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (1)
-
-
- 11%
-
MOOG moog-rk621293
starstar_borderstar_borderstar_borderstar_border" Review 2 Years Later "
Parts have failed according to alignment shop they will not\nWarranty their alignment do to these parts needing replacement. \nEditors note: The customer purchased a Moog RK control arm. It has a 3 year warranty. The date of purchase was over 3 years and could not do a warranty claim.
verified_user Verified Buyer - victor higareda - . MOOG moog-rk621293 - 1 out of 5starstarstarstarstar" Review 2 Years Later "
Parts have failed according to alignment shop they will not\nWarranty their alignment do to these parts needing replacement. \nEditors note: The customer purchased a Moog RK control arm. It has a 3 year warranty. The date of purchase was over 3 years and could not do a warranty claim.
verified_user Verified Buyer - victor higareda - . MOOG moog-rk621293 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
Part is holding up fine very pleased.
verified_user Verified Buyer - Robert Cook - . MOOG moog-rk621293 - 5 out of 5starstarstarstarstar" Very satisfied with my order "
The parts ordered arrived timely and in good condition. It was my first experience dealing with this online company and I have to say the live chat feature was very helpful in my ordering the correct part for my vehicle.
verified_user Verified Buyer - Kalua Mckeague - . MOOG moog-rk621293 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Do these lower control arms feature the newer lower ball joints with the integral boots like the moog-k80827 ball joint?
- Answer:
- Moog-rk621293 does not have the updated integral boots like the moog-k80827 ball joint.
- Question:
- Do these lower control arms come with the new lower ball joint design moog-rk80827?
- Answer:
- This control arm will have the external old school dust boot.
- Question:
- Does the original hardware bolts fit these control arms?
- Answer:
- Yes, Moog control arms will use the OEM fasteners.
- Question:
- I am wondering what the quality is like in comparison to OEM.
- Answer:
- Moog RK series will be equal will OEM equivalent. The CK series will exceed OEM. Moog engineers investigate what fails on parts and redesign them to increase durability and performance.
- Question:
- Will part number rk621293 still work on my 2006 4WD toyota Tacoma with a 3 inch lift?
- Answer:
- If your 3 inch lift is a suspension lift and your control arms are aftermarket arms, part number rk621293 will not work on your 2006 4WD toyota Tacoma.
- Question:
- Am I supposed to leave that fitting in during installation, or simply fill with grease and remove?
- Answer:
- You leave the grease zerk in. You do not remove it.
- Question:
- For the RK21293 ball joint/lower control arm parts (respectively), are the ball joints pre-pressed (pre-installed) into the control arms?
- Answer:
- moog-rk621293 lower control arm has the ball joint and bushings installed.
- Question:
- Do the ball joints on these control arms have grease zerks?
- Answer:
- These ball joints are permanently sealed and non-greaseable. These are OEM replacements.