Offset Straight Bushings by Size
Straight polyurethane bushings with an offset profile. The drawing shows where each of the five measurements is taken.
Each letter on the drawing is a column in the chart below. Measure your old part or the space it fits, then narrow the chart with the filters. There are 28 offset straight bushings to choose from.
- A: Inner Diameter
- B: Face Diameter
- C: Outer Diameter
- D: Length
- E: Offset Length
| Image | A: Inner Diameter mm | B: Face Diameter mm | C: Outer Diameter mm | D: Length mm | E: Offset Length mm |
|---|---|---|---|---|---|
|
9.62 | 15.92 | 30.29 | 21.96 | 11.22 |
|
11.1 | 24.92 | 32.18 | 19.11 | 10.93 |
|
11.19 | 29.99 | 39.38 | 20.89 | 6.44 |
|
12.88 | 55.85 | 68.98 | 19.37 | 19.85 |
|
13.41 | 42.76 | 47.04 | 29.31 | 24.57 |
|
14.16 | 40.98 | 51.99 | 22.37 | 18.75 |
|
14.39 | 27.61 | 42.36 | 20.51 | 16.97 |
|
14.49 | 39.86 | 51.97 | 18.24 | 14.18 |
|
15.78 | 30.75 | 41.25 | 21.92 | 12.93 |
|
17.45 | 49.82 | 60.95 | 40.07 | 27.15 |
|
17.57 | 40.53 | 61.09 | 31.72 | 25.79 |
|
17.87 | 43.1 | 61.07 | 39.3 | 32.34 |
|
19.43 | 49.51 | 60.36 | 18.79 | 11.56 |
View part
|
20.64 | 23.59 | 38.16 | 62.18 | 35.77 |
|
21.34 | 37.5 | 58.84 | 32.16 | 32.16 |
|
22.02 | 46.08 | 70.57 | 36.38 | 18.91 |
|
22.28 | 42.77 | 60.93 | 31.8 | 26.9 |
|
22.3 | 49.38 | 60.98 | 32.23 | 11.25 |
|
22.33 | 39.42 | 46.55 | 25.57 | 12.52 |
|
22.35 | 38.73 | 66.62 | 23.7 | 23.7 |
|
22.55 | 42.45 | 66.05 | 35.76 | 35.76 |
|
23.65 | 45.25 | 60.21 | 28 | 28 |
|
23.75 | 40.28 | 59.09 | 32.58 | 32.58 |
|
25.38 | 48.44 | 63.57 | 19 | 13.75 |
|
25.4 | 47.45 | 56.12 | 19.11 | 10.21 |
View part
|
25.56 | 39.72 | 52.51 | 30.96 | 14 |
|
31.74 | 53.24 | 73.42 | 28.46 | 24.24 |
|
47.69 | 72.06 | 78.21 | 26.29 | 26.29 |
Letters match the drawing above. Measurements are listed in millimetres; switch to inches with the Units buttons. Polyurethane is flexible, so allow a little either way, and call 888-406-2330 if you are between sizes.
No offset straight bushings match those measurements.
More parts in the Bushing Finder
Flanged Bushing Halves · Flanged Straight Bushings · Straight Bushings · Polyurethane Grommets · Mount Bushings, Male · Mount Bushings, Female · Mount Bushings, Flat · Flanged Sway Bar Bushings · Sway Bar Bushings, No Flange · Sway Bar Bushings, Flared Base · Shock Eye Bushings · Double Shock Eye Bushings · Inverted Shock Eye Bushings · Coil Spring Isolators, Cupped · Coil Spring Isolators, Inset · Coil Spring Isolators, Nippled · Coil Spring Isolators, Nippled Riser · Dust Boots
