2016 Ford Explorer 4WD Suspension Diagram

This interactive diagram shows the front suspension, steering, 4WD driveline and rear suspension of the 2016 Ford Explorer 4WD. Hover over or tap any part to see what it does, the signs that it is worn, and the replacement parts we carry that fit your Explorer, down to the side and position.

2016 Ford Explorer 4WD Suspension Diagram (Full Vehicle)

FRONT
Both ends of the truck from above, with the 4WD driveshaft between them. The front is to the left.

2016 Ford Explorer 4WD Front Suspension and Steering Diagram

PASSENGER SIDEDRIVER SIDEFRONT
Front struts, lower arms, steering rack, sway bar and 4WD half shafts from above the front of the truck.

2016 Ford Explorer 4WD Rear Suspension Diagram

DRIVER SIDEPASSENGER SIDEREAR
Rear multi-link suspension and the 4WD rear drive unit from above the rear driver side corner.

We carry parts for it Not stocked yet Hover or tap any part.

Kits and packages for your 2016 Ford Explorer 4WD

1 kit

Packages

Complete Shock Package Kit
Includes
  • 2 × Front Strut (driver and passenger)
  • 2 × Rear Shock Absorber
$641.90
View package

See every part for the 2016 Ford Explorer 4WD

The 2011 to 2019 Explorer uses MacPherson struts at the front, bolted to the knuckles by a two bolt clevis, with a forged L shaped lower arm under each corner. The steering rack sits behind the front axle and the front sway bar runs across the top of the cradle with long links up to the struts. The rear is a multi-link design on its own subframe: a wide spring arm behind the axle carries the coil spring, an A shaped upper arm sits on top, a toe link and a short trailing link sit ahead of the axle, and the shock is separate from the spring. On 4WD models a power transfer unit on the transaxle drives a two piece driveshaft to the rear drive unit.

We carry replacement parts for 30 of the 40 components on this diagram, 94 parts in all. See every part for the 2016 Ford Explorer 4WD.

Questions about the 2016 Ford Explorer 4WD suspension

What are the most common suspension wear items on a 2016 Ford Explorer?

Front lower control arm rear bushings, front and rear sway bar links, inner and outer tie rod ends and the rear toe links are the parts most often replaced. Ford also recalled the rear toe links on many 2011 to 2019 Explorers, so check for open recalls.

Does the 2016 Ford Explorer have upper control arms at the front?

No. The front uses struts, so the strut locates the top of the knuckle. There is one lower control arm per side, with the ball joint pressed into it. The rear does have an upper arm on each side.

Is the ball joint sold separately?

Not for this truck. The front lower ball joint is pressed into the control arm, so a worn joint is fixed by replacing the arm, which comes with new bushings.

Are 4WD and front wheel drive Explorers different underneath?

The arms, links, struts and knuckles are shared. 4WD models add the power transfer unit, a driveshaft, a rear drive unit and rear halfshafts, and the rear hubs carry the halfshafts.

Did anything change for the 2016 refresh?

The suspension arms, links and knuckles carried over. Brake sizes depend on the trim rather than the year: XLT and up trucks use 352 mm front and 345 mm rear rotors, and base trucks smaller ones. 2017 to 2019 trucks can take a different inner tie rod.

Printable 2016 Ford Explorer 4WD suspension diagrams

Numbered diagrams to print or save for the shop. The numbers match the numbered parts on the interactive diagram.

2016 Ford Explorer 4WD Suspension Diagram (Full Vehicle) with numbered parts
2016 Ford Explorer 4WD Suspension Diagram (Full Vehicle)
2016 Ford Explorer 4WD Front Suspension and Steering Diagram with numbered parts
2016 Ford Explorer 4WD Front Suspension and Steering Diagram
2016 Ford Explorer 4WD Rear Suspension Diagram with numbered parts
2016 Ford Explorer 4WD Rear Suspension Diagram