Alignment Tools

Suspension Alignment Tools

Check out these handy tools that will make your suspension work much easier. From caster adjustments, to bushing installations and tie rod aligning these alignment tools from SPC get the job done effectively.

Universal Alignment Tools

Caster and Camber Tools from SPC

Part Number Image Tool Make Model Description
SPC-6140 SPC Universal Caster and Camber Tools Camber Tool Dodge 1987-2004 Durango 2WD
1998-2003 Dakota 2WD
A specifically designed wrench for access to the difficult to reach upper control arm bolts used to adjust caster and camber.
SPC-8286 SPC Universal Caster and Camber Tools Camber/Caster Tool Chrysler 1981-1983 Imperial RWD The perfect tool for quick and accurate camber-caster changes.
SPC-8286 SPC Universal Caster and Camber Tools Camber/Caster Tool Dodge B150, B250, and B350
1981-2001 Ram Van RWD
1998-2003 Durango
1990-1996 Ramcharger RWD
1994-2001 Ram 1500
1994-1999 Ram 2500
1994-2002 Ram 3500
The perfect tool for quick and accurate camber-caster changes.
SPC-8286 SPC Universal Caster and Camber Tools Camber/Caster Tool Mitsubishi 2006-2009 Raider The perfect tool for quick and accurate camber-caster changes.
SPC-8292 SPC Universal Caster and Camber Tools Front Camber Tool Chevrolet 1982-1992 Camaro Quick, easy and accurate camber changes with adjustable upper strut towers
SPC-8292 SPC Universal Caster and Camber Tools Front Camber Tool Pontiac 1982-1992 Firebird
1982-1992 Trans Am
Quick, easy and accurate camber changes with adjustable upper strut towers
SPC-83785 SPC Universal Caster and Camber Tools Camber/Caster Tool Cadillac 2003-up CTS/CTS-V
2005-2011 STS
2004-2009 SRX
Adjust front camber and caster by yourself on the most popular GM platforms with a turnbuckle tool design. Attach the tool to the front lower control arms and dial in the desired changes.
SPC-83785 SPC Universal Caster and Camber Tools Camber/Caster Tool Chevrolet 2004-2006 SSR
2002-2009 Trailblazer
Adjust front camber and caster by yourself on the most popular GM platforms with a turnbuckle tool design. Attach the tool to the front lower control arms and dial in the desired changes.
SPC-83785 SPC Universal Caster and Camber Tools Camber/Caster Tool GMC 2002-2009 Envoy Adjust front camber and caster by yourself on the most popular GM platforms with a turnbuckle tool design. Attach the tool to the front lower control arms and dial in the desired changes.
SPC-83785 SPC Universal Caster and Camber Tools Camber/Caster Tool Buick 2004-2007 Rainer Adjust front camber and caster by yourself on the most popular GM platforms with a turnbuckle tool design. Attach the tool to the front lower control arms and dial in the desired changes.
SPC-83785 SPC Universal Caster and Camber Tools Camber/Caster Tool Isuzu 2003-2007 Ascender Adjust front camber and caster by yourself on the most popular GM platforms with a turnbuckle tool design. Attach the tool to the front lower control arms and dial in the desired changes.
SPC-83785 SPC Universal Caster and Camber Tools Camber/Caster Tool Oldsmobile 2002-2004 Bravada Adjust front camber and caster by yourself on the most popular GM platforms with a turnbuckle tool design. Attach the tool to the front lower control arms and dial in the desired changes.
SPC-83785 SPC Universal Caster and Camber Tools Camber/Caster Tool Saab 2005-2009 9-7X Adjust front camber and caster by yourself on the most popular GM platforms with a turnbuckle tool design. Attach the tool to the front lower control arms and dial in the desired changes on the Saab 9-7X 05-09
SPC-87320 SPC Universal Caster and Camber Tools Rear Bushing Adjusting Tool Ford 1986-2007 Taurus Utilize this rear camber/toe kit for the 1986-2007 Ford Taurus. This bushing adjustment tool allows quick and easy access to the head of the eccentric bushing.
SPC-87320 SPC Universal Caster and Camber Tools Rear Bushing Adjusting Tool Mercury 1986-2007 Sable Utilize this rear camber/toe kit for the 1986-2007 Mercury Sable. This bushing adjustment tool allows quick and easy acces to the head of the eccentric bushing.
SPC-40915 SPC Universal Caster and Camber Tools Cam Extractor Tool Lexus 2003-2015 GX470 Remove the OE cam sleeves with this press tool. The extended length forcing screw allows you to remove the sleeve without having to remove the entire steering rack. Recommended when install the SPC Cams 25430, 25435, and 25440.
SPC-40915 SPC Universal Caster and Camber Tools Cam Extractor Tool Toyota 1995-2015 4Runner
2007-2014 FJ Cruiser
2001-2007 Sequoia
1999-2006 Tundra
1996-2015 Tacoma and PreRunner
Remove the OE cam sleeves from Toyota trucks with this press tool. The extended length forcing screw allows you to remove the sleeve without having to remove the entire steering rack. Recommended when install the SPC Toyota Cams 25430, 25435, and 25440.
SPC-45940 SPC Universal Caster and Camber Tools Cam Adjusting Tool Cadillac 2002-up Escalade Easily adjust the upper control arm cans on the 02 to current Cadillac Escalade with this wrench. The tool surrounds the entire perimeter of each cam, providing a no slip method to reach the rusty and hard to reach OE Cams.
SPC-45940 SPC Universal Caster and Camber Tools Cam Adjusting Tool Chevrolet 1999-up Silverado 1500 and Silverado HD
1999-2010 Silverado 2500
1999-2010 Silverado 3500
2002-up Avalanche 1500
2004-2013 Colorado
2000-up Suburban
2000-up Tahoe
Easily adjust the upper control arm cans on many GM applications with this wrench. The tool surrounds the entire perimeter of each cam, providing a no slip method to reach the rusty and hard to reach OE Cams.
SPC-45940 SPC Universal Caster and Camber Tools Cam Adjusting Tool GMC 1999-up Sierra 1500 and Sierra HD
1999-2010 Sierra 2500
1999-2010 Sierra 3500
2004-2013 Canyon
2000-up Suburban
2000-up Yukon and Yukon XL
Easily adjust the upper control arm cans on many GM applications with this wrench. The tool surrounds the entire perimeter of each cam, providing a no slip method to reach the rusty and hard to reach OE Cams.
SPC-45940 SPC Universal Caster and Camber Tools Cam Adjusting Tool Hummer 2002-2009 H2
2006-2010 H3
Easily adjust the upper control arm cans on the 02-09 Hummer H2 and the 06-10 Hummer H3 with this wrench. The tool surrounds the entire perimeter of each cam, providing a no slip method to reach the rusty and hard to reach OE Cams.
SPC-73010 SPC Universal Caster and Camber Tools 1-1/8" Punch Tool BMW All models with a 14mm Bolt from 1963-1988 Use this tool to cut holes to install the SPC-83115 for 63-88 BMW's.
SPC-73010 SPC Universal Caster and Camber Tools 1-1/8" Punch Tool Datsun 1977-1983 810
1971-1973 240Z
1974 260Z
1975-1983 280Z
Use this tool to cut holes to install the SPC-83115 for Datsun 240Z, 260Z, 280Z and 810.
SPC-73010 SPC Universal Caster and Camber Tools 1-1/8" Punch Tool Nissan 1984-1988 200SX
1975-1983 280Z
1984-1996 300ZX
1982-1984 Maxima
Use this tool to cut holes to install the SPC-83115.
SPC-83775 SPC Universal Caster and Camber Tools Alignment Tool Buick 1979-1993 Riviera FWD With this tool, you get a fine, accurate and easy way to adjust camber or caster on the Buick Riviera FWD 79-93. No extra parts or cutting/grinding are needed.
SPC-83775 SPC Universal Caster and Camber Tools Alignment Tool Chevrolet 1993-2002 Camaro RWD With this tool, you get a fine, accurate and easy way to adjust camber or caster on the Chevrolet Camaro 93-02 RWD. No extra parts or cutting/grinding are needed.
SPC-83775 SPC Universal Caster and Camber Tools Alignment Tool Oldsmobile 1978-1992 Toronado FWD With this tool, you get a fine, accurate and easy way to adjust camber or caster on the Oldsmobile Toronado 78-92 FWD. No extra parts or cutting/grinding are needed.
SPC-83775 SPC Universal Caster and Camber Tools Alignment Tool Pontiac 1993-2002 Firebird RWD
1993-2002 Trans Am RWD
With this tool, you get a fine, accurate and easy way to adjust camber or caster on the Pontiac Firebird and TransAm 93-02 RWD. No extra parts or cutting/grinding are needed.
SPC-83775 SPC Universal Caster and Camber Tools Alignment Tool Cadillac 2003-2007 CTS/CTS-V
1980-1992 Eldorado
1980-1992 Seville FWD
2004-2009 SRX
2005-2011 STS
With this tool, you get a fine, accurate and easy way to adjust camber or caster on Cadillac CTS/CTS-V 03-07, Eldorado 80-92 FWD, Seville 80-92 FWD, SRX 04-09, and STS 05-11. No extra parts or cutting/grinding are needed.
SPC-88360 SPC Universal Caster and Camber Tools Pin Joint Adjusting Wrench Tool Dodge Ram 4500
Ram 5500
The flat hex wrench is designed to easily and quickly install the Dodge pin joints 23852 and 23854. Use a 1-1/2" socket to hold your adjustment then tighten the jam nut.
SPC-88360 SPC Universal Caster and Camber Tools Pin Joint Adjusting Wrench Tool Sterling Bullet 4500
Sterling 5500
The flat hex wrench is designed to easily and quickly install the Dodge pin joints 23852 and 23854. Use a 1-1/2" socket to hold your adjustment then tighten the jam nut.
SPC-88830 SPC Universal Caster and Camber Tools Sleeve Puller (Aftermarket) Tool Universal - SPC's puller is designed to work specifically with SPC parts 23100 and 23120. Instead of breaking the ears off the sleeve, you can now pull the sleeves off easily. Not recommended for impact wrenches or OE Ford sleeves.

Ball Joint and Bushing Tools from SPC

Part Number Image Tool Make Model
SPC-27 SPC Universal Caster and Camber Tools Pitman Arm Separator Universal - For use on most cars and some light trucks. A tapered wedge esily removes the pitman arm from the shaft with just a few blows from a hammer. DIMENSIONS: 1" opening, 12" overall length.
SPC-23580 SPC Universal Caster and Camber Tools Bushing Press Sleeves Dodge 1994-2001 Ram 1500
1994-1999 Ram 2500
Use these sleeves to easily install the 23510-40 Offset Ball Joint. Sleeves are designed to match the angle of the yoke on the axle housing to ensure proper installation.
SPC-23580 SPC Universal Caster and Camber Tools Bushing Press Sleeves Jeep 1984-2001 Cherokee
1984-1996 Comanche
1993-2004 Grand Cherokee
1984-1990 Wagoneer
Wrangler JK, TJ and YJ,
Use these sleeves to easily install the 23510-40 Offset Ball Joint. Sleeves are designed to match the angle of the yoke on the axle housing to ensure proper installation.
SPC-37985 SPC Universal Caster and Camber Tools 4-Way Ball Joint/Tie Rod Separator Universal- The highest strength and most versatile Ball Joint Removal Tool on the market. Features a unique design of a 4-way ball joint separator that allos the tool to be adjusted to remove ball joints of any height instead of using multiple tools.
SPC-37990 SPC Universal Caster and Camber Tools Ball Joint Separator Universal- Heavy duty, drop forged alloy steel lever type ball joint and tie rod end remover. Provides good leverage action to remove stubborn tie rod ends or break ball joint tapers easily. Use in place of a direct action separator when space doesn't allow. Fits 3/4" openings
SPC-40340 SPC Universal Caster and Camber Tools Tie Rod Separator Universal- Drop forged alloy steel tool acts as a tapered wedge, which quickly and easily separates the tie rod and the knuckle. Features a 21/32" opening and a 16" long handle.
SPC-40910 SPC Universal Caster and Camber Tools Upper Control Arm Bushing Press Universal- This kit allows you to easily replace press-in type control arm bushings on many domestic and imported vehicles. A mechanical power screw quickly and easily removes worn bushings, installing them without damaging the control arm. This kit includes a c-frame, screw assembly, and all the adapters needed.
SPC-40915 SPC Universal Caster and Camber Tools Cam Extractor Lexus 2003-2015 GX Remove the OE cam sleeves from the Lexus GX 2003-15 with this press tool. The extended length forcing screw allows you to remove the sleeve without having to remove the entire steering rack. Recommended when install the SPC Cams 25430, 25435, and 25440.
SPC-40915 SPC Universal Caster and Camber Tools Cam Extractor Toyota 1995-2015 4Runner
2007-2014 FJ Cruiser
2001-2007 Sequoia
1999-2006 Tundra
1996-2015 Tacoma and PreRunner
Remove the OE cam sleeves from Toyota trucks with this press tool. The extended length forcing screw allows you to remove the sleeve without having to remove the entire steering rack. Recommended when install the SPC Toyota Cams 25430, 25435, and 25440.
SPC-40920 SPC Universal Caster and Camber Tools Performance Ball Joint Press Universal - This ball joint press is designed to remove the OE ball joint when installing SPC Performance sliding ball joints on smaller vehicles. The unique design allows you to remove the ball joint from the front upper control arm without removing the arm from the vehicle.
SPC-40940 SPC Universal Caster and Camber Tools Bushing Press Set (29 Pieces) Universal - This versatile, 29 pieve press set allows you to service a wide range of bushings to efficiently remove and install. The kit uses long ACME threaded screws and bearing nuts for bushings between 1-1/2" to 3" outside diameter (36-80mm)
SPC-41110 SPC Universal Caster and Camber Tools Master Ball Joint Adapter Set Universal - The Master Ball Joint Adapter set includes the adapters and receiving tubes needed to work on GM, Ford, and Dodge 2WD and 4WD trucks, vans and SUVs.
SPC-65100 SPC Universal Caster and Camber Tools Bushing Extractor Honda 1988-2000 Civic
1988-1992 CRX
1992-1997 Del Sol
Quickly and easily remove and install rear trailing arm bushins in under 20 minutes instead of the 2 hour factory "book" time. This tool eliminates the need to remove the trailing arm from the vehicle or hydraulic press.
SPC-65100 SPC Universal Caster and Camber Tools Bushing Extractor Acura 1994-2001 Integra Quickly and easily remove and install rear trailing arm bushins in under 20 minutes instead of the 2 hour factory "book" time. This tool eliminates the need to remove the trailing arm from the vehicle or hydraulic press. Applications: Acura 1994-01 Integra
SPC-66025 SPC Universal Caster and Camber Tools Bushing Press Sleeves Chrysler 2005-2015 300
2004-2008 Pacifica
Designed to be used with the SPC Performance Ball Joint Press 40920, these adapter sleeves remove the stock rear control arm bushings.
SPC-66025 SPC Universal Caster and Camber Tools Bushing Press Sleeves Dodge 2008-2015 Challenger
2006-2015 Charger
2005-2008 Magnum
Designed to be used with the SPC Performance Ball Joint Press 40920, these adapter sleeves remove the stock rear control arm bushings.
SPC-67647 SPC Universal Caster and Camber Tools Toe Press Adapter Subaru 2012-2015 BRZ
2009-2015 Forester
2008-2005 Impreza including WRX/STI
2010-2014 Legacy
2010-2014 Outback
2012-2015 XV Crosstrek
With this bushing press adapter, you can easily remove the OE rear toe link bushing on many Subarus. Also, use this adapter to install the SPC Eccentric Toe bushing 67660. Combine this adapter with the Ball Joint Press 72509 or the Performance Ball Joint Press 40920.
SPC-67647 SPC Universal Caster and Camber Tools Toe Press Adapter Scion 2012-2015 Scion FRS With this bushing press adapter, you can easily remove the OE rear toe link bushing on the Scion FR-S. Also, use this adapter to install the SPC Eccentric Toe bushing 67660. Combine this adapter with the Ball Joint Press 72509 or the Performance Ball Joint Press 40920.
SPC-68880 SPC Universal Caster and Camber Tools Sockets Chrysler - These sockets are designed to use on Chrysler products with screw in ball joints. They include a 3/4" square drive and a four-point shallow spine.
SPC-72509 SPC Universal Caster and Camber Tools RWD/4WD Ball Joint Press Universal - A forcing screw powered press and the proper adapters allows you to easily remove and install press-fit ball joints. Comes in a durable case.
SPC-75980 SPC Universal Caster and Camber Tools Adapters Acura 2013-2015 ILX
2006-2011 CSX
Use these adapters with the SPC Ball Joint press. These adapters push the old bushing out of the stock arm and install the new bushing included in the SPC 67465 kit.
SPC-75980 SPC Universal Caster and Camber Tools Adapters Honda 2006-2015 Civic
2012-2015 Civic Si
Use these adapters with the SPC Ball Joint press. These adapters push the old bushing out of the stock arm and install the new bushing included in the SPC 67465 kit.
SPC-79500 SPC Universal Caster and Camber Tools Bushing Press Sleeves Chevrolet 1988-2000 1500, 2500, and 3500
2002-2013 Avalanche 1500
2002-2006 Avalanche 2500
1992-1994 Blazer
2003-2015 Express
1999-2015 Silverado 1500
1999-2010 Silverado 2500
1999-2010 Silverado 3500
1992-1999 Suburban
2000-2015 Suburban 1500
2000-2014 Suburban 2500
1995-2015 Tahoe
Use these adaptors with the SPC Ball Joint press 7250. They are designed to easily remove the stock bushing and installation of the SPC 86310 and SPC 86330 Offset Upper Control Arm Bushings.
SPC-79500 SPC Universal Caster and Camber Tools Bushing Press Sleeves GMC 1988-2000 1500, 2500, and 3500
1988-1991 Jimmy
2003-2015 Savana Van
2001-2006 Sierra 1500HD
1999-2015 Sierra 1500
1999-2010 Sierra 2500
1999-2010 Sierra 3500HD
1992-1999 Suburban
1992-2015 Yukon 1500
2000-2014 Yukon 2500
Use these adaptors with the SPC Ball Joint press 7250. They are designed to easily remove the stock bushing and installation of the SPC 86310 and SPC 86330 Offset Upper Control Arm Bushings.
SPC-75990 SPC Universal Caster and Camber Tools Press Set Mercedes-Benz 1994-2007 C-Class
1998-2009 CLK-Class
1986-2008 E-Class
1996-2011 SLK
Designed for the quick and easy removal of the OE rear control arm bushings and the installation of new adjustable camber bushings.
SPC-88360 SPC Universal Caster and Camber Tools Pin Joint Adjusting Wrench Tool Dodge Ram 4500
Ram 5500
The flat hex wrench is designed to easily and quickly install the Dodge pin joints 23852 and 23854. Use a 1-1/2" socket to hold your adjustment then tighten the jam nut.
SPC-88360 SPC Universal Caster and Camber Tools Pin Joint Adjusting Wrench Tool Sterling Bullet 4500
Sterling 5500
The flat hex wrench is designed to easily and quickly install the Dodge pin joints 23852 and 23854. Use a 1-1/2" socket to hold your adjustment then tighten the jam nut.
SPC-88830 SPC Universal Caster and Camber Tools Sleeve Puller (Aftermarket) Universal- This puller is desinged to work with the SPC-23100 and the SPC-23120 sleeves. Allows you to pull the sleeve off without breaking the ears off the sleeve as per usual. Not for use with impact wrenches or on Ford OE sleeves.

Tie Rod and Toe Tools from SPC

Part Number Image Tool Make Model
SPC-7023 SPC Universal Caster and Camber Tools Tie Rod Tool Universal - Four position feature and a 360 degree rotation allows you to grip the adjusting sleeve properly, even when there is little access or clearnce. Made to fit most compact and standard size passenger cars and light trucks.
SPC-8370 SPC Universal Caster and Camber Tools 5" Tie Rod Puller Ford 1986-2007 Taurus Removes tie rod ends with a straight, firm and fast pull. Makes installing the SPC-87300 camber/toe kit a breeze. The puller has a 2-1/4" reach and a 2-1/2" spread. Can aslo be used for pressing bushings into control arms and trailing arms.
SPC-8370 SPC Universal Caster and Camber Tools 5" Tie Rod Puller Infiniti 2003-2007 G35 Removes tie rod ends with a straight, firm and fast pull. Makes installing the SPC-87300 camber/toe kit a breeze. The puller has a 2-1/4" reach and a 2-1/2" spread. Can aslo be used for pressing bushings into control arms and trailing arms.
SPC-8370 SPC Universal Caster and Camber Tools 5" Tie Rod Puller Mercury 1986-2006 Sable Removes tie rod ends with a straight, firm and fast pull. Makes installing the SPC-87300 camber/toe kit a breeze. The puller has a 2-1/4" reach and a 2-1/2" spread. Can aslo be used for pressing bushings into control arms and trailing arms.
SPC-8370 SPC Universal Caster and Camber Tools 5" Tie Rod Puller Nissan 2003-2008 350Z Removes tie rod ends with a straight, firm and fast pull. Makes installing the SPC-87300 camber/toe kit a breeze. The puller has a 2-1/4" reach and a 2-1/2" spread. Can aslo be used for pressing bushings into control arms and trailing arms.
SPC-40310 SPC Universal Caster and Camber Tools Tie Rod/Ball Joint/Pitman Arm Tool Universal - A handy five-in-one tool. Includes three drop forged forks and two handles. One handle is used with a hammer and one is designed to fit an air hammer. All of the forks are threaded to interchange with either handle. 3 forks opening dimensions are : 11/16", 15/16", and 1-1/8"
SPC-40340 SPC Universal Caster and Camber Tools Tie Rod Separator Universal - Drop forged alloy steel tool that acts as a tapered wedge, easily separating the tie rod from the knuckle. Features a 21/32" knuckle and a 16" long handle for easy access.
SPC-40900 SPC Universal Caster and Camber Tools Tie Rod Adjusting Tool Universal - Fits most cars and light trucks with split tie rod sleeves. Double end feature makes a 360 degree turn possible.
SPC-41030 SPC Universal Caster and Camber Tools Tie Rod Tool Universal - 1/2" drive tie rod tool allows for the easy removal of tie rod ends on most cars and light trucks. U-shaped slot measures 1" x 3/4". Not for use with impact wrenches.
SPC-55600 SPC Universal Caster and Camber Tools Toe Tool Chrysler 1993-1997 Concorde
1994-1997 LHS
1994-1997 New Yorker
Tool kit includes three pieces allowing for easy access and adjusting of toe. Kit comes with the SPC Toe Tool Wrench - 55605, SPC Tie Rod Socket - 55607 and the SPC Tie Rod Stabilizer - 55609.
SPC-55600 SPC Universal Caster and Camber Tools Toe Tool Dodge 1993-1997 Intrepid Tool kit includes three pieces allowing for easy access and adjusting of toe. Kit comes with the SPC Toe Tool Wrench - 55605, SPC Tie Rod Socket - 55607 and the SPC Tie Rod Stabilizer - 55609.
SPC-55600 SPC Universal Caster and Camber Tools Toe Tool Eagle 1993-1997 Vision Tool kit includes three pieces allowing for easy access and adjusting of toe. Kit comes with the SPC Toe Tool Wrench - 55605, SPC Tie Rod Socket - 55607 and the SPC Tie Rod Stabilizer - 55609.
SPC-55700 SPC Universal Caster and Camber Tools Toe Tool Chrysler 1998-2001 LHS
1999-2004 300M
1999-2004 Concorde
Tool designed to adjust toe. Kit includes the SPC Tie Rod Stabilizer - 55609, the SPC Toe Tool Wrench - 55705, the Hex Assembly with Insert - 55710 and the Keyway Inserts.
SPC-55700 SPC Universal Caster and Camber Tools Toe Tool Dodge 1998-2004 Intrepid Tool designed to adjust toe. Kit includes the SPC Tie Rod Stabilizer - 55609, the SPC Toe Tool Wrench - 55705, the Hex Assembly with Insert - 55710 and the Keyway Inserts.
SPC-67647 SPC Universal Caster and Camber Tools Toe Press Adapter Scion 2012-2015 FRS Easily remove the OE rear toe link bushing with this bushing press adapter. Combine the adapter with the SPC Ball Joint Press to install SPC's eccentric toe bushings SPC-67660.
SPC-67647 SPC Universal Caster and Camber Tools Toe Press Adapter Subaru 2012-2015 BRZ
2009-2015 Forester
2008-2015 Impreza including WRX/STi
2010-2014 Legacy
2010-2014 Outback
2012-2015 XV Crosstrek
With this bushing press adapter, you can easily remove the OE rear toe link bushing on many Subarus. Also, use this adapter to install the SPC Eccentric Toe bushing 67660. Combine this adapter with the Ball Joint Press 72509 or the Performance Ball Joint Press 40920. Applications: 12-15 Subaru BRZ, 09-15 Forester, 08-15 Impreza including WRX/STi, 10-14 Legacy, 10-14 Outback, 12-15 XV Crosstrek.
SPC-71909 SPC Universal Caster and Camber Tools Tie Rod Tool Kit Universal - Allows for the adjustment of most cars and light trucks, and slo includes the larger adjust tools needed for Ford Super Duty pickups. Tools have a 1/2" drive opening that allos the use of a ratchet or breaker bar. Kit comes in protective carrying case.
SPC-77210 SPC Universal Caster and Camber Tools Inner Tie Rod Crimper Chevrolet All Models This tools makes the job of crimping the new tie rod to the rack much easier. For use on GM inner tie rod ends instead of needing excessive force on the rack seals.
SPC-77210 SPC Universal Caster and Camber Tools Inner Tie Rod Crimper GMC All Models This tools makes the job of crimping the new tie rod to the rack much easier. For use on GM inner tie rod ends instead of needing excessive force on the rack seals.
SPC-77350 SPC Universal Caster and Camber Tools Tie Rod Sleeve Adjuster Ford Super Duty This tool is designed for use on the new Ford Super Duty chassis along with other light trucks and vans. The extra long bar allows for maximum leverage to loosen rusted sleeves without injuring your knuckles. The 8 position tool allows 360 degree rotation without removing the adjuster block from the sleeve.
SPC-78090 SPC Universal Caster and Camber Tools Toe Tool Saturn S-Series This leverage tool provides an easy way to move the rear control arm to accurately adjust toe on the 91-02 Saturn S-Series.
SPC-83850 SPC Universal Caster and Camber Tools Rear Toe Tool Buick 1988-2004 Regal This tool allows for the quick, precise, and profitable adjustment of rear toe on both the left and right sides of the 88-04 Buick Regal.
SPC-83850 SPC Universal Caster and Camber Tools Rear Toe Tool Cadillac 2004-2009 SRX This tool allows for the quick, precise, and profitable adjustment of rear toe on both the left and right sides of the 04-09 Cadillac SRX.
SPC-83850 SPC Universal Caster and Camber Tools Rear Toe Tool Chevrolet 1990-2001 Lumina Sedan
1995-1999 Monte Carlo
This tool allows for the quick, precise, and profitable adjustment of rear toe on both the left and right sides of the 90-01 Chevrolet Lumina Sedan and 95-99 Monte Carlo.
SPC-83850 SPC Universal Caster and Camber Tools Rear Toe Tool Oldsmobile 1988-1997 Cutlass Supreme This tool allows for the quick, precise, and profitable adjustment of rear toe on both the left and right sides of the 88-97 Oldsmobile Cutlass Supreme.
SPC-83850 SPC Universal Caster and Camber Tools Rear Toe Tool Pontiac 1995-1996 Grand Prix This tool allows for the quick, precise, and profitable adjustment of rear toe on both the left and right sides of the 95-96 Pontiac Grand Prix.
SPC-87325 SPC Universal Caster and Camber Tools Rear Toe Wrench Ford 1986-2007 Taurus Sedan
1986-1994 Tempo Sedan
This tool allos for the quick, precise, and profitable adjustment of the rear toe on both sides of the 86-07 Ford Taurus Sedan and 86-94 Tempo Sedan.
SPC-87325 SPC Universal Caster and Camber Tools Rear Toe Wrench Mercury 1986-2007 Sable Sedan
1986-2094 Topaz Sedan
This tool allos for the quick, precise, and profitable adjustment of the rear toe on both sides of the 86-07 Mercury Sable Sedan and 86-94 Topaz Sedan.
SPC-87560 SPC Universal Caster and Camber Tools 24mm Toe Adjusting Tool Acura 2013-up ILX This 24mm wrench tool makes rear toe adjustments easier on the 2013 and up Acura ILX.
SPC-87560 SPC Universal Caster and Camber Tools 24mm Toe Adjusting Tool Honda 2006-up Civic
2007-up CR-V
2003-2011 Element
This 24mm wrench tool makes rear toe adjustments easier on the 06-up Honda Civic, 07-up CR-V and 03-11 Element.
SPC-87560 SPC Universal Caster and Camber Tools 24mm Toe Adjusting Tool Mini 2002-up Cooper This 24mm wrench tool makes rear toe adjustments easier on the 02 and up Mini Cooper, Cooper S, Conv. and Clubman.
SPC-89000 SPC Universal Caster and Camber Tools Inner Tie Rod Wrench Set Universal - The set includes a Dual Socket Inner Tie Rod Removal tool along with 1-3/16", 1-5/16", and 1-7/16" hex tools. NOT for use with impact wrenches.
SPC-97650 SPC Universal Caster and Camber Tools Rear Toe Tool Ford 1986-2005 Taurus Wagon These wrenches are designed to better engage the OEM cam, allowing for quicker and easier rear toe adjustments. This full contact wrench prevents the usual slipping that occurs when adjusting these eccentric toe cams. Applications include the 86 and 05 Ford Taurus Wagons.
SPC-97650 SPC Universal Caster and Camber Tools Rear Toe Tool Mercury 1986-2005 Sable Wagon These wrenches are designed to better engage the OEM cam, allowing for quicker and easier rear toe adjustments. This full contact wrench prevents the usual slipping that occurs when adjusting these eccentric toe cams. Applications include the 86 and 05 Mercury Sable Wagons.