Torsion Bar Dust Boots - Dodge Charger - 41701

  • 41701 360image 1
  • 41701 Chrysler Torsion Bar Dust Boot Kit - A B E Body
  • 41701 Chrysler Torsion Bar Dust Boot Kit - A B E Body
  • 41701 Chrysler Torsion Bar Dust Boot Kit - A B E Body
  • 41701 Chrysler Torsion Bar Dust Boot Kit - A B E Body
  • 41701 Chrysler Torsion Bar Dust Boot Kit - A B E Body
  • 41701 360image large 1

Chrysler Torsion Bar Dust Boot Kit - A B E Body

Manufacturer: Prothane
Part Number: 41701

:(?)
Black
Red
Price: $5.77

check_box In Stock check_box Ships Immediately


  • 2 of Torsion Bar Dust Boots - 60519
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Cross Reference from 41701 to 5.13101
Energy Suspension 5.13101
Polyurethane.
Price: $9.46
Warranty: 7 Year Warranty

question_answer Ask us a Question

FitmentChrysler Torsion Bar Dust Boot Kit - A B E Body 41701 fits these vehicles:
Details

Torsion Bar Dust Boots - Dodge Charger - 41701

Pin Opening Diameter Base Opening Diameter Height of Boot Piece Number
21.59mm
(0.85 inch)
44.45mm
(1.75 inch)
56.51mm
(2.225 inch)
60519
Here is our complete list of universal dust boots.

Prothane Polyurethane Universal Dust Boots

Prothane Dust Boots

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Prothane makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water, and snow.

How-to obtain measurements

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call. It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.

Prothane Dust Boots
Prothane Dust Boots

After Measureing Your Dust Boots

Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.

Prothane 41701

Product Reviews for Torsion Bar Dust Boots - Dodge Charger - 41701

5 Star (2)
67%
4 Star (1)
33%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Prothane 41701

5 out of 5 based on 3 user reviews. Write a Review

W
verified_user

starstarstarstarstar" Well made "

Great replacement for old dust boots but should come with installation instructions. Had to put them in a container of water and heat them in the microwave to get them soft enough to slip over the end of the torsion bar.

verified_user Verified Buyer - - . Prothane 41701 - 5 out of 5
R
verified_user

starstarstarstarstar" Very high quality "

I had now difficulty to adapt the torsion bar dust boot kit , just used the right tools\n\nregards Rolf\ncharger\nSweden

verified_user Verified Buyer - - . Prothane 41701 - 5 out of 5
W
verified_user

starstarstarstarstar_border" Well made "

Great replacement for old dust boots but should come with installation instructions. Had to put them in a container of water and heat them in the microwave to get them soft enough to slip over the end of the torsion bar.

verified_user Verified Buyer - - . Prothane 41701 - 4 out of 5
Fitment for 41701

compare_arrows Compare with Similar Parts


This Part
41701 compare
$5.77
Energy Suspension
Energy Suspension compare
$9.46
($3.69) more expensive