moog-ck80054 | Front Left Upper Control Arm | 98-11 Ford Ranger

  • moog-ck80054 360image 1
  • moog-ck80054 Front Upper Control Arm and Ball Joint - Driver Side
  • moog-ck80054 Front Upper Control Arm and Ball Joint - Driver Side
  • moog-ck80054 Front Upper Control Arm and Ball Joint - Driver Side
  • moog-ck80054 Front Upper Control Arm and Ball Joint - Driver Side
  • moog-ck80054 360image large 1

Front Upper Control Arm and Ball Joint - Driver Side

Manufacturer: MOOG
Part Number: moog-ck80054
Price: $121.48

check_box Free Shipping!check_box In Stock check_box Ships Immediately


Suggested part for moog-ck80054: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
grease-gun-combo

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Upper Control Arm and Ball Joint - Driver Side moog-ck80054 fits these vehicles:
Details

moog-ck80054 | Front Left Upper Control Arm | 98-11 Ford Ranger

1998-2011 Ford Ranger, 1999 Mazda B2500, and 1998-2004 Mazda B3000
  • Fits models with front coil springs
  • Fits vehicels with one piece design
2005-2007 Mazda B3000
  • Fits models with front coil springs
  • Fits vehicels with one piece design
For driver side use ck80052

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

MOOG moog-ck80054

Product Reviews for moog-ck80054 | Front Left Upper Control Arm | 98-11 Ford Ranger

5 Star (1)
50%
4 Star (1)
50%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar_border

MOOG moog-ck80054

4 out of 5 based on 2 user reviews. Write a Review

S
verified_user

starstarstarstarstar" Great part "

The part is meeting all my needs at a great price will no longer buy at the parts store. suspension.com will be my go-to shopping site.

verified_user Verified Buyer - - . MOOG moog-ck80054 - 5 out of 5
T
verified_user

starstarstarstarstar_border" Review 1 Year Later "

So far so good.

verified_user Verified Buyer - - . MOOG moog-ck80054 - 4 out of 5
Fitment for moog-ck80054
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordRanger2011-1998Front Left Upper Quantity 1
MazdaB23002010-2001Front Left Upper Quantity 1
MazdaB25002001-1998Front Left Upper Quantity 1
MazdaB30002007-1998Front Left Upper Quantity 1
MazdaB40002004-1998Front Left Upper Quantity 1

question_answer Customer Questions and Answers


Question:
Hey are the upper control arm part moog-ck80054 Longer than the stock control arms for a 2006 Ford ranger? And if not do all have longer control arms for it because it's lifted and my geometry angle are terrible.
Answer:
All Moog control arm are OEM replacements. Same dimensions as OEM. You would need to purchase an aftermarket control arm.

Question:
Is the moog-ck80054 longer than the stock arms offered for the 99 Ford Ranger?
Answer:
The moog-ck80054 is a stock OE replacement. This arm will follow OE specifications an will not be longer or shorter.

Question:
Is the ball joint removable on ck80054?
Answer:
No the ball joint is not replaceable. You have to replace the control arm.

Question:
Can you confirm that I need 1/4 -28 self-tapping zerks for part number ck80054?
Answer:
Yes, Moog zerks for their control arms will have the 1/4-28 self tapping threads

Question:
Will the moog-ck80054 fit on my 4x4 Torsion bar suspension 03 Ford Ranger?
Answer:
No the moog-ck80054 is for the front coil spring suspension Ford Rangers. The torsion bar upper arms are part numbers moog-CK80068 for the right and CK8708T for the left.

Question:
MOOG-CK80054 - Front left upper control arm - Does Ck80054 come with a greasable zerk fitting?
Answer:
Moog-CK80054 will come with a greasable ball joint and grease zerk.