Fits Super Duty Models Only.
Kevlar Infused Body Mounts
Fits Super Duty - Crew Cab only
Fits Super Duty - Regular and Super Cabs only.
For Crew Cab models, use the 4.4120 Body Mount Set
Replacement for OE Bump Stops. 2 Inch Height
This set fits Models with approximately 1.15 Inch Endlink Eyes. Fits 99 models made on or before 3/99. If you have eyes of approximately 1.5 inch you will instead use 4.5186
Only Fits 1 1/4 inch Bar
Includes bushings for approximately 1.5 Inch Endlink Eyes. Vehicles with smaller (approx) 1.15 Inch Endlink Eyes will use 4.5192 instead. These vehicles are typically early 99 models (March/1999 and earlier approx)Use 4.5192 Instead!
Only Fits 1 1/4 inch Bar
Only Fits 30mm Size Bar
This kit fits models with an approx 1.5 inch endlink eye. Some models will have a 1 inch endlink eye and instead use kit 61167.- Only Fits 32mm Size Bar
Fits Models with a 1 inch endlink eye. This is not common. More common is the approx 1.5 inch endlink eye. Those will use part 61166 instead. - Only Fits 32mm Size Bar
Includes a Pair of Matching Bushings. Fits a 1-1/4 Inch Bar Only
Includes a Pair of Matching Bushings. Fits a 32mm bar only.
Bushing has 2.15 Inch Width Across Face. Vehicles with Bushing 1.875 Inch Width Use K80072 Instead.
Fits a 1-3/16 Inch Sway Bar Only. Includes a Pair of Matching Bushings.
Fits SRW with 156 Inch/158 Inch/ or 182 Inch Ford Axle and a 1-3/16 Inch Sway Bar. Includes a Pair of Matching Bushings
Only Fits 30mm Bar
Fits Models with 1.5 Inch Inner Diameter Endlink Eyes. F250 and F350 Models will need to measure to be sure you dont need a 1 Inch Eye version.
Includes One Complete Link. Fits Passenger Side Only
Includes One Complete Link
Fits 4WD Dually Models. Includes One Complete Link. Center to Center Length 13.7 Inch. Fits Models under 9900 Lb. GVW. Models over 9900 Lb GVW will use K80268 Center to Center Length 7.93 Inch
Fits left or right side. Fits Models with 9900LB GVW and Over
Fits Models Using 21.5mm Bolt
Fits models using a 20mm Bolt
For F-550 from 3/22/99 with 21.5mm eyelet holes
For Gasoline Engine Types Only
Enhanced Design Ball Joint. Fits Left or Right Side
Fits Left or Right Side
Fits Vehicles with the Dana 60 Axle Only. Fits Left or Right Side
Fits Driver Side Only
Replaces Tie Rod At Pitman Arm
Fits Passenger Side Only. Connecting Tie Rod.
At Right Hand Connection Tie Rod
At Pitman Arm
3", 3-1/2", And 3-5/8" Wide leaf Spring
2-3/8" And 2-3/4" Wide Leaf Spring
Fits Models with 36 Tooth Design
4-Wheel ABS, Single Rear Wheel Models
Fits from 03/08/99 on, 13mm thick flange
2-Wheel ABS, Single Rear Wheel Models
4-Wheel ABS, Dual Rear Wheel Models
Suspension.com wants to know..."What do your customers want us to make for them?"Tell us and we'll make sure they hear your vote!